Avaya Aura Communication Manager Administration - 3100.1 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

Your Avaya Aura@ Communication Manager System has been operating without Incident for several months. Then, one day at 10:00 AM, you get multiple reports about blocked access and users unable to make calls.
You run Processor Occupancy Summary and Trunk Group Summary reports and determine that there are no issues with processor occupancy or availability of trunks. So now you decide to see if someone made a change to the system around 10:00 AM Which report will show what administrative or maintenance system changes that were made around 10:00 AM and by whom?

A. Ahistory report B. An activity performed report C. Asystem-parameters change report D. Ahardware error log report E. An administrative or maintenance summary report

Discussion 0

Correct Answer: A Vote an answer

Question 2

You need to configure a station so that when a department manager makes calls to employees the manager's calls will ring even though the called station might have Sent All Calls activated. Although the manager's station can be designated as a VIP telephone, the manger must be able to selectively activate this feature.
Which feature addresses this need?

A. Button activated Executive Calling B. FAC or button activated Priority Calling C. Button activated Send All Calls override D. FAC or button activated Automatic Inclusion

Discussion 0

Correct Answer: B Vote an answer

Question 3

What is the maximum number of digits allowed for a FAC?

A. 3 B. 2 C. 5 D. 4

Discussion 0

Correct Answer: A Vote an answer

Question 4

Which parameters must be configured to implement Automatic Route Selection (ARS)?

A. Feature Access Code, Digit Analysis, Digit Conversion, Route Pattern, Trunk Group B. Far-End Node, Near-End Node, Coverage Path, Call Forwarding C. Dial Plan, Codec Set, Private Numbering, Network Region D. MGC List, H 2<18 Link Timer, Call Admission Control. Feature Access Code

Discussion 0

Correct Answer: A Vote an answer

Question 5

Which statement is true about the Station Lock feature?

A. The feature overrides the COR of a station. B. The feature permits only outgoing calls, and using a FAC and security code permits Incoming and outgoing calls. C. The feature permits Incoming calls, and the telephone can be unlocked only from designated telephone(s) by inputting a security code. D. The feature permits only incoming calls, and using a FAC and security code permits emergency or outgoing calls.

Discussion 0

Correct Answer: C Vote an answer

Question 6

Your customer wants to extend their office calls using the Extension to Cellular features.
Where will calls be redirected?

A. To a call pickup group B. To a hunt group C. To another extension on the same system D. To an administered off-system number

Discussion 0

Correct Answer: D Vote an answer

Question 7

Through which Communication Manager interface do you add an H.248 gateway to CM?

A. System Platform Management Console B. System Management Interface (SMI) C. Linux command line D. System Access Terminal (SAT)

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for FreeCram members. You can sign-up / login (it's free).

Question 8

Which statement most accurately describes the function of automatic call back feature?

A. It allows internal users who are called when they are busy to place the second call on hold until the first call is finished. B. It allows internal users who are called when they are busy to activate a feature to automatically call back that second caller, once the first call is finished. C. It allows internal users who placed a call to a busy or unanswered internal telephone to be called back when the called telephone becomes available. D. It allows internal users who placed a call to a busy or unanswered external telephone to be called back when the called telephone becomes available.

Discussion 0

Correct Answer: C Vote an answer

Question 9

You are a technician responsible for an Avaya Aura@ Communication Manager implementation. You need to connect your PC/laptop to the server for initial setup and administration, as well as, set up a PC/laptop for the customer for on-going administration.
From the following list, which method is best used for on-site access to Communication Manager?

A. Through the service PC/laptop connected to the Secure Access Link (SAL) interface on the server using a crossover cable B. Through the service PC/laptop connected to the pre-configured CM IP address of 192.11.13.5 C. Through the service PC/laptop connected to the services port on the server using a USB cable D. Through the service PC/laptop connected to the services port on the server using a crossover cable

Discussion 0

Correct Answer: D Vote an answer

Question 10

Which ASA main menu option displays the capacity of the Communication Manager?

A. General B. Tasks C. Advanced D. Fault and Performance

Discussion 0

Correct Answer: A Vote an answer