Alcatel-Lucent Nokia IP Networksand Services Fundamentals - 4A0-100 FREE EXAM DUMPS QUESTIONS & ANSWERS

A. Define an IP address for the CPM Ethernet port. B. Specify authorization information to control access to the router. C. Set the date/time for the system. D. Initialize the hardware.

A. 136.160.17.192/28 B. 136.160.17.128/25 C. 136.160.17.192/26 D. 136.160.17.192/27

A. R3 installs the LSA received from R1 in its link state database and floods a copy to its neighbors. B. R3 discards the LSA received from R1 and sends an ACK to R1. C. R3 discards the LSA received from R1 and sends a copy of the LSA from its link state base to R1. D. R3 installs the LSA received from R1 in its link state database, sends an ACK to R1 and floods a copy to its neighbors.

A. The default action of an IP filter is to forward packets. B. By default, no IP filter is applied to an interface. C. IP filters can be created to filter based on IP and MAC addressing. D. IP filters can be applied on inbound traffic, outbound traffic, or both.

A. There must be multiple ports assigned to the LAG. B. All ports in the LAG must be configured with the same characteristics. C. All of the above. D. Auto-negotiation must be enabled on all ports in the LAG.

A. By allowing a block of routes to be represented by one route. B. By rejecting duplicate route advertisements. C. By only keeping best routes in the routing table. D. By not advertising directly connected routes.

A. next-hop 10.2 3.1 B. next-hop 192.168.2.0 C. next-hop 192.168.2.1 D. next-hop 10.2.3.2

A. It uses multiple criteria to choose the best routes. B. It uses the preference value to choose the best routes. C. It uses SPF algorithm to calculate the shortest paths. D. It uses link metrics to calculate the shortest paths.

A. Console B. Session C. Memory D. File

A. The Media Dependent Adapter (MDA) B. The Input/ Output Module (IOM) C. The Control Processor Module (CPM) D. The Switch Fabric (SF)