Alcatel-Lucent Services Architecture - 4A0-104 FREE EXAM DUMPS QUESTIONS & ANSWERS

A. The IES must use an IP address that is different than the CE. B. The IES must include a network port. C. The IES can only include one SAP for the CE. D. The IES's interface must be an IGP peer with the CE.

A. FALSE B. TRUE

A. They simplify the configuration required when adding new PEs. B. They use mesh SDPs to connect smaller VPLSes together. C. They allow a VPLS to scale more easily. D. They allow a service to span multiple metro networks.

A. Routes from different customers with the same IPv4 address prefix are treated as equivalent by MP-BGP. B. The multi-protocol nature of MP-BGP allows VPRN routes to be converted into IPv4 routes in the provider core network. C. MP-BGP will advertise routes to other BGP sessions on the same PE without the need of policies. D. MP-BGP is an enhanced version of BGP that can carry customer route prefixes for multiple VPRNs.

A. The Layer 2 MTUs must match between the IES and the VPLS B. Once the SDP is configured on both PE routers, both the services will be operationally up without further configuration changes. C. The Layer 2 MTU must be 14 bytes smaller on the VPLS than it is on the IES. D. The SDP must be a mesh E. The SDP must be a spoke.

A. A separate FDB is maintained for each VPLS service to track MAC addresses learned from each service. B. An FDB is maintained on the PE router to track MAC addresses learned from all traffic through the router. C. An FDB is maintained on the PE router to track MAC addresses learned from all VPLS services on the router. D. A VPLS service does not use an FDB. E. For each VPLS service, two FDBs are maintained to track MAC addresses; one for unicast traffic and one for multicast and broadcast traffic.

A. Route distinguishes are appended to IPv4 prefixes to form 16 byte VPN-IFV1 prefixes. B. Route distinguishes are 12 bytes in length C. All of the above statements are true. D. All of the above statements are false. E. Route distinguishes are used to determine which routes a VPRN should import. F. CE routes must be configured with the proper route distinguishes for the VPRN they are associated to

A. vc-type vlan B. vc-type ether C. vc-type dotlq D. vc-type null

A. 6 B. 3 C. 10 D. 2 E. 5 F. 4

A. A route distinguisher combined with an IPv4 prefix produces a VPN-IPv4 prefix. B. Route distinguishes are appended to IPv4 prefixes to form IPv6 prefixes. C. CE routers use a route distinguisher to indicate which VPRN they are associated to. D. Route distinguishes are used to determine which routes a VPRN should import.

A. Service providers can apply QoS, ingress/egress traffic shaping and policing on a per service basis. B. Customers can connect to the same service using different subnets. C. Different customers with overlapping address space can be accommodated. D. There is a clear demarcation of customer and service provider networks.

A. configure router mpls B. configure router gre C. configure router transport-tunnel D. configure router rsvp-te E. configure router tunnel

A. Control Word B. Service Label C. DLC Header D. Transport Label

A. sdp-ping B. traceroute C. vprn-ping D. Isp-trace

A. PE2 needs a mirror destination that specifies a SAP. B. PE1 needs a mirror source with the remote source specified. C. Both PE1 and PE2 need a mirror source. D. PE2 needs a mirror source with the remote source specified. E. Both PE1 and PE2 need a mirror destination.