CWNP Certified Wireless Analysis Professional - CWAP-403 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

What is the formula used to calculate the Duration field value in an RTS frame?

A. RTS Duration field = Data or management frame to be sent duration + CTS duration B. RTS Duration field = CTS duration C. RTS Duration field = Data or management to be sent frame duration D. RTS Duration field = Data or management frame to be sent duration + CTS duration + one ACK duration + three SIFS

Discussion 0

Correct Answer: D Vote an answer

Question 2

The PLCP sublayer provides framing by adding a header to create what type of data unit?

A. MPDU B. MSDU C. PPDU D. PSDU

Discussion 0

Correct Answer: C Vote an answer

Question 3

Which one of the following is not an 802.11 Management frame?

A. PS-Poll B. Action C. Beacon D. Authentication

Discussion 0

Correct Answer: A Vote an answer

Question 4

An RST frame should be acknowledged by which frame?

A. RTS-Ack B. Block Ack C. Ack D. CTS

Discussion 0

Correct Answer: C Vote an answer

Question 5

What is the difference between a Data frame and a QoS-Data frame?

A. QoS Data frames include a QoS control field B. QoS Data frames include a DSCP control field C. QoS Data frames include a QoS information element D. QoS Data frames include an 802.1Q VLAN tag

Discussion 0

Correct Answer: A Vote an answer

Question 6

A manufacturing facility has installed a new automation system which incorporates an 802.11 wireless network. The automation system is controlled from tablet computers connected via the WLAN. However, the automation system has not gone live due to problem with the tablets connecting to the WLAN. The WLAN vendor has been onsite to perform a survey and confirmed good primary and secondary coverage across the facility. As a CWAP you are called in to perform Spectrum Analysis to identify any interference sources.
From the spectrum analysis, you did not identify any interference sources but were able to correctly identify the issue. Which of the following issues did you identify from the spectrum analysis?

A. There is a power mismatch between the APs and the clients B. A high noise floor has resulted in a SNR of less than 20% C. The tablets are connecting to the wrong SSID D. The tablets are entering power save mode and failing to wake up to receive the access points transmissions

Discussion 0

Correct Answer: D Vote an answer