CWNP Certified Wireless Design Professional - CWDP-304 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

What functions may be performed by a WIPS?(Choose all that apply.)
Response:

A. Client access to the distribution system B. Performance monitoring and response C. Distributed protocol analysis D. Automated threat mitigation E. Data forensics and analysis

Discussion 0

Correct Answer: B,C,D,E Vote an answer

Question 2

What limitation exists when WMM is not enabled on an 802.11n WLAN?
Response:

A. EDCA values will change B. Only two ACs will be available C. 802.11 QoS will not be available D. The maximum channel-width will be 20MHz

Discussion 0

Correct Answer: C Vote an answer

Question 3

You have enabled IEEE 80211 FT in your WLAN infrastructure. You want to verify roaming between APs (two at a time) and determine If all of your end-points are capable of performing fast roaming What tool would you use to achieve this goal?

A. Predictive design tool and two Wi-Fi adapters (one for each band) B. Protocol Analyzer and two Wi-Fi adapters (one for each channel of the chosen bands) C. WLAN scannerdiscovery tool and two WI-FI adapters (one for each channel of the chosen bands D. RF Spectrum Analyzer and two spectrum adapters (one for each band)

Discussion 0

Correct Answer: B Vote an answer

Question 4

When selecting a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to distributed?

A. APs that were designed for a centralized forwarding model may not support all features in distributed forwarding mode. B. The router between the APs and the controller must be made aware of the APs as forwarding client STAs. C. All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit power arbiter for other APs in the ESS. D. Centralized control functions, such as key management and distribution, RRM, and load balancing will no longer be supported.

Discussion 0

Correct Answer: A Vote an answer

Question 5

You have designed a WLAN with a plan for 87 APs m a large office building. The customer has informed you that the budget is not as large as they hoped and they can only purchase 53 APs What action should be taken?

A. Perform a complete redesign of the wireless network and inform the customer if some original requirements cannot be accomplished B. Use only 2.4 GHz radios because the signals can be received at a greater distance C. Simply increase the output power of the APs by 30 percent to accommodate tor the smaller number of purchased APs D. Remove as many walls as possible within the facility so that the signals can travel a g<eater distance

Discussion 0

Correct Answer: A Vote an answer

Question 6

If you choose to recommend dynamic channel assignment for the APs in your WLAN design what action should you also recommend'?

A. Ensure that the output power of an APs is set to the minimum available in the system interface B. Configure the settings used by the dynamic channel assignment algorithm optimally for your design C. Replace all antennas with panel antennas instead of omnidirectional antennas D. Ensure that the output power of all APs is set to the maximum allowed in the regulatory domain

Discussion 0

Correct Answer: B Vote an answer

Question 7

What important item is often left out of operational and maintenance plans?
Response:

A. Configuration backups B. Syslog analysis C. Engineering feedback D. Network overview

Discussion 0

Correct Answer: C Vote an answer

Question 8

Excessive uplink RTP frame retransmissions can result in ____________.

A. Deauthentication of the transmitter by the receiver B. Head-of-Line blocking at the receiver C. Lowering of the data transmission rate by the transmitting station D. MOS scores in excess of 5

Discussion 0

Correct Answer: C Vote an answer

Question 9

Prior to meeting with the customer for the first time, you should do which of the following?
Response:

A. Plan an initial design to present to them. B. Research the customer as much as possible. Try to understand what their business is, who their customers are, and any other information you can find regarding product lines and recent press announcements. C. Decide which vendor they will benefit most from. D. Find out what vendor their competitors use.

Discussion 0

Correct Answer: B Vote an answer

Question 10

In this question, you will compare the mobility processes of a network that supports WPA2-Personal and WPA2-Enterprise. Assume the use of a
15-character
ASCII passphrase for WPA2-Personal and EAP-TTLS/MSCHAPv2 with WPA2-Enterprise. Also, assume that proprietary roaming protocols are not supported.
When a device transitions from one BSS to another within the same ESS, what step must be performed in the WPA2-Enterprise transition that are not performed in the WPA2-Personal transition?

A. Open System Authentication B. 4-Way Handshake C. 802.11 Reassociation D. 802.1X authentication

Discussion 0

Correct Answer: D Vote an answer

Question 11

What strategy can be used to ensure efficient cell overlap for VoIP site surveys?
Response:

A. Ensure at least two APs can be seen with appropriate signal strengths from each location. B. Increase the output power of the radio in all APs. C. Install higher gain antennas in the APs. D. Measure the percentage of cell overlap using the cell overlap feature in the site survey software.

Discussion 0

Correct Answer: D Vote an answer

Question 12

You're preparing to perform a site survey for a company that processes meat. Some areas are restricted due to high-security. What do you have to do in order to proceed with the site survey?

A. Ensure that you and your team are using food industry approved USB adapters for the survey. B. Gain appropriate access and clearance to perform the site survey. C. Gain meat processing access certification from the FDA. D. Just begin the survey, they will understand

Discussion 0

Correct Answer: B Vote an answer

Question 13

What service must be implemented on your customers' network to authenticate users against an LDAP database prior to access to the WLAN infrastructure being granted?

A. SFTP B. RADIUS C. TLS D. NTP

Discussion 0

Correct Answer: B Vote an answer