Cisco Troubleshooting Cisco Data Center Infrastructure - 300-615 FREE EXAM DUMPS QUESTIONS & ANSWERS

An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route covers the DNS server is missing. Which action resolve the issue?

Refer to the exhibit. A network engineer must use BGP to route IPv4 and IPv6 routes between R1 and R2.
The IPv4 addresses are exchanged as expected between the routers through BGP. The routers have reached an Established BGP state. However, the IPv6 routes from R2 fail to show in the routing table of R1. Which action resolves the issue?

Refer to the exhibit. A VXLAN fabric is configured on Cisco Nexus 9000 Series Switches but the traffic is dropped on VLAN 88 between VTEP1 and VTEP2. Which configuration resolves the issue?

An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

Refer to the exhibit.

An engineer installed a UCS rack mount server and received this error after upgrade. Which action resolves the issue?

Refer to the exhibit. A network engineer configures an authentication domain through an LDAP provider on the Cisco UCS Manager for users from different companies to log into their respective organizations created in the UCS Manager. The engineer tests the configuration and notices that any user has login access to any organization in the UCS Manager. Which action should be taken to resolve the issue?

An engineer is investigating traffic loss on a Cisco UCS B-Series blade server. The engineer discovers high rates of RX CRC STOMPED errors on the fabric interconnect ports to which the server traffic is pinned Which action resolves the issue?

Refer to the exhibit A Cisco VXLAN must use bidirectional PIM so that
*Spine2 is the active RP for multicast group 225 0 0 0V24
*Loopback 254 is used as a logical interface for PIM configuration
After configuration was applied, Spine1 became the active RP for multicast group 225.0.0.0/24 instead of Spine2. Which action resolves the issue?

Refer to the exhibit.

A Cisco UCS B-Series Blade Server is configured to boot from a shared storage via an iSCSI network. When a service profile is associated with the blade, the blade fails to attach the LUN. Which action resolves the issue?

Refer to the exhibit.

An upgrade operation fails with an error displayed. Which action resolve the issue?

Refer to the exhibit.

An engineer configures the server port on a Cisco Nexus 5000 Series Switch. The switch connects to an NPV edge switch port. The server fails to send the FC traffic to the fabric. Which action resolves the issue?

Refer to the exhibit.

An engineer monitors a Cisco UCS server logs and discovers a blade discovery issue. Which procedure resolves the issue?

An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?