Cisco Implementing Cisco Advanced Call Control and Mobility Services - 300-815 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

Refer to the exhibit.

For long-distance calls, users must prefix their dialed number with "91." The translation pattern was created to strip the 91 as the PSTN expects a 10- digit number. The PSTN also requires the calling number to be set to 9195551234. However, the service provider has said calls with a different calling number are being received. How is this issue resolved?

A. Change the partition of the translation pattern from none to pstn_pt. B. Enable Force Authorization Code on the route pattern. C. Enable Use Calling Party's External Phone Number Mask on the translation pattern. D. Disable Use Calling Party's External Phone Number Mask on the route pattern.

Discussion 0

Correct Answer: D Vote an answer

Question 2

An engineer is configuring Cisco UCM lo forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken to accomplish this task?

A. Configure class of control. B. Configure service parameters C. Configure device pools. D. Configure enterprise softkeys.

Discussion 0

Correct Answer: B Vote an answer

Question 3

A company has an SRST gateway running an IOS XE image. The company plans to enable the IPv6 addressing companywide. To enable the IPv6 in a unified SRST gateway to support SIP phones, what are two supported supplementary features for an IPv6 fallback scenario? (Choose two.)

A. three-way conference B. secure SIP lines C. T.38 fax relay D. SIP trunk E. transcoding

Discussion 0

Correct Answer: A,C Vote an answer

Question 4

A user's phone is already configured for Single Number Reach, and the user wants a feature to move an active call from a mobile phone to a desk phone and vice-vers a. As an administrator, which additional configuration should be made to fulfill the user's request?

A. Add the mobility key to the softkey template that the desk phone is using. B. Check to make sure that the Resume softkey option appears on the desk phone. C. Use Dialed Number Analyzer to determine if the user extension can dial the mobile phone. D. Confirm that the desk phone is subscribed to Cisco Extension Mobility.

Discussion 0

Correct Answer: A Vote an answer

Question 5

You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?

A. configuration for a single SIP phone B. configuration for SIP registrar service C. configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager) D. configuration items common for all SIP phones

Discussion 0

Correct Answer: A Vote an answer

Question 6

Refer to the exhibit.

Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?

A. rule 1 /^$[2-9]..[2-9]......$$/ /\1/ B. rule 1/^\+1$[2-9]..[2-9]......$$/ /\1/ C. rule 1 /^\+1$[2-9]..[2-9]......$$/ /\0/ D. rule 1 /^/+$[^1].*$/ /011\1/

Discussion 0

Correct Answer: B Vote an answer

Question 7

An engineer must route all SIP calls in the form of <user>@example.com to the SIP trunk gateway corporate local. Which two SIP route patterns can be used to accomplish this task? (Choose two.)

A. gateway.corporate.local B. *.* C. *@example.com D. [email protected] E. example.com

Discussion 0

Correct Answer: B,C Vote an answer

Question 8

A customer is using a SIP trunk to route calls to ITSP to decrease the possibility of downtime, the customer invested in a failover device How does the customer ensure reachability to ITSP, so that if one device on ITSP fails, the calls will be routed to another device?

A. Enable transmit security status on the SIP security profile B. Enable ANAT on the SIP profile. C. Monitor the link using network management toots, and if it fails, manually change the routing to another working device. D. Enable SIP Option Ping on the SIP profile.

Discussion 0

Correct Answer: D Vote an answer

Question 9

Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?

A. in the queuing configuration B. in Cisco Unified CM Service Parameters C. in the telephony service configuration D. in Cisco Unified CM Enterprise Parameters

Discussion 0

Correct Answer: A Vote an answer

Question 10

A company is using Cisco Jabber on-premises to make B2B calls on video. The calls are using Cisco Expressway-C and Expressway-E and have been configured in Cisco UCM to be able to call any URI on the internet. The Jabber client also has voice enabled and must be able to call local, regional, and international numbers. Where must Cisco UCM be configured to meet this requirement for URI dialing?

A. Enter ".*" in the route pattern section tied to a route group and list. B. Enter "!#" in the SIP route pattern. C. Enter "!#" in the route pattern section tied to a route group and list. D. Enter "*" in the SIP route pattern.

Discussion 0

Correct Answer: A Vote an answer

Question 11

In Cisco UCM, which tool is used to check SIP traces?

A. MTP B. CCSIP C. OS Administration Page D. RTMT

Discussion 0

Correct Answer: D Vote an answer