Cisco CCIE Wireless Exam (V2.0) - 350-050 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

You are configuring a Cisco WLC in a hotel that provides wireless guest access to the Internet, using web authentication. Guest credentials are generated for individual rooms upon check-in. Users often complain about certificate security warnings when opening their browser. You need to fix this issue so that the clients stop getting this certificate warning every time they access the Web-Authentication page, but still protect the credentials during the authentication handshake of this guest setup. You cannot configure the user devices yourself. What is the best solution that meets these requirements?

A. Remove the self-signed SSL certificate of the WLC or make sure that the clients know about the WLC CA that generated this self-signed certificate. B. Configure the WLAN with an EAP method that does not use PKI certificates, but still protects the credentials during the authentication handshake. C. Disable HTTPS on the WLC to avoid the certificate warning during the web authentication. D. Install a third-party SSL certificate on the WLC, issued by a known public CA.

Discussion 0

Correct Answer: D Vote an answer

Question 2

Which of the below parameters are used in calculating the range - maximum distance - of an outdoor link between two bridges? Choose two.

A. The outside temperature. B. The length of the antenna. C. The modulation type. D. The cable length between bridge and the connecting switch. E. The bridge transmission power.

Discussion 0

Correct Answer: C,E Vote an answer

Question 3

You are designing a wireless guest anchoring solution for a large company. Forty-five Cisco WLCs running 7.0.116.0 code are deployed in the corporate network. You expect about 3000 devices to use the guest network at any one time. A junior wireless administrator has suggested using a single 4402-12 WLC running 7.0.116.0 as the anchor controller. What is your response?

A. A single 4402 WLC supports only 2500 client database entries and therefore does not meet the design requirements. B. Using a 4402-12 WLC is the best option, based on the design requirements, because it is currently the least expensive WLC that supports auto-anchoring. C. A single 4402-12 WLC, regardless of code. supports only 40 simultaneous EoIP tunnels and therefore does not meet the design requirements. D. Using a 4402 WLC is not feasible because 4402 WLCs do not support the 7.0 release of code.

Discussion 0

Correct Answer: A Vote an answer

Question 4

IN CUWN, what DHCP option needs to be configured for APs to join specific WLCs, if the WLCs and APs reside in different subnets?

A. option 82 B. option 150 C. option 60 D. option 43

Discussion 0

Correct Answer: D Vote an answer

Question 5

Refer to the exhibit.

Which statement about the Cisco WCS RRM event message is true?

A. Excessive non-802.11 interference caused the channel change. B. Being near another managed AP on the same channel caused the channel change. C. Event-driven RRM caused the channel change. D. A CleanAir AP detected a persistence interferer and forced an RRM reassignment of channels.

Discussion 0

Correct Answer: B Vote an answer

Question 6

You are going to create a new WLAN on your production 5508 WLC running 7.0.116.0 code. You do not want this WLAN to be in the default AP group on the Cisco WLC until you have thoroughly tested it. How can you achieve this goal when creating the WLAN on the production controller?

A. Use a Cisco WCS to create the WLAN by using WLAN ID 17. B. Create the new WLAN on the Cisco WLC using WLAN ID 20. C. Create the new WLAN on the Cisco WLC by using WLAN ID 13. D. A new WLAN will always be in the default AP group until you move the WLAN to a different AP group on the Cisco WLC.

Discussion 0

Correct Answer: B Vote an answer

Question 7

The IT manager wants the Cisco WCS to send email notifications of alarms to identify issues in a timely fashion. The manager finds that not all of the alarms were sent via email. Which default severity level of alarm will trigger an email?

A. critical B. critical and major C. informational D. major E. minor

Discussion 0

Correct Answer: A Vote an answer

Question 8

You want to expand the services of your wireless network and add location tracking on top of voice over wireless. Although the existing wireless network offers excellent voice over wireless services, tracking accuracy is not working well enough. You decide to contract a site survey engineer. What is this engineer most likely to recommend?

A. Add more APs to the perimeters of the floors. B. Add wireless APs that are not from Cisco, to accomplish location tracking. C. Disable 2.4 GHz and higher data rates, which interfere with location tracking. D. Choose between voice over wireless and location tracking; you cannot use both simultaneously. E. Install chokepoints to perform good location accuracy.

Discussion 0

Correct Answer: A Vote an answer

Question 9

During the installation of a Cisco WCS, you are given the option to modify the protocol ports used by the WCS. Which two of these protocol ports can you modify? (Choose two.)

A. HTTPS B. SNMP C. TFTP D. HTTP E. FTP

Discussion 0

Correct Answer: A,D Vote an answer

Question 10

The IT manager needs to start deploying WLAN in a new building and is using the planning mode in Cisco WCS to generate a coverage proposal. Which statement about the planning mode in Cisco WCS is false?

A. Users can specify a particular model of Cisco AP, antenna, and throughput for the planning mode calculation. B. Walls that are defined in the floor map are used or accounted for in the planning mode calculation. C. Planning mode calculates the necessary number of APs, based on traffic type on the network, location accuracy requirements, number of users, and number of users per square footage. D. In the advanced options, the Aggressive option generates more APs to cover the floor area, whereas the Very safe option generates a proposal with fewer APs to cover the same area.

Discussion 0

Correct Answer: D Vote an answer

Question 11

The IT administrator can confirm the air quality and existing non-Wi-Fi interference on the Cisco WLC but cannot find any non-Wi-Fi interference on the Cisco WCS. What are two possible reasons for this issue? (Choose two.)

A. The administrator did not add Cisco MSE to Cisco WCS. B. The administrator needs to enable the CleanAir function from the Cisco WCS GUI again. C. The administrator added Cisco MSE to Cisco WCS but forgot to sync Cisco MSE with Cisco WLC and the floor map. D. The administrator needs to restart Cisco WCS after adding Cisco WLC, to enable the CleanAir function.

Discussion 0

Correct Answer: A,C Vote an answer

Question 12

To improve the overall wireless experience of your users, you do not want any clients to use 802.11b data rates to associate to your wireless network. You do not want 802.11a/g/n data rates to be affected in any way. Which two configuration tasks on the Cisco WLC will achieve this goal? (Choose two.)

A. Disable the 1, 2, 5.5, and 11 Mb/s data rates. B. Disable the 2.4 GHz radio on all the APs. C. Disable the DSSS data rates. D. Disable the 802.11b network on the Cisco WLC. E. Configure the WLAN radio policies to 802.11a/g only. F. Disable all data rates below 12 Mb/s.

Discussion 0

Correct Answer: A,E Vote an answer

Question 13

Refer to the exhibit.

You have setup an autonomous AP and configured an SSID to serve clients. While troubleshooting a client that is not able to associate to the SSID, you enable some debugs. Given the debug output seen in the exhibit, what is most likely the cause of association failure?

A. The authenticating EAP method is PEAP and the username and password combination is incorrect. B. The RADIUS server is rejecting the dot1x authentication due to a message integrity check failure. C. The SSID is secured with PSK and the shared secret is wrong. D. The SSID is configured with TKIP encryption and the client PC is using AES encryption.

Discussion 0

Correct Answer: C Vote an answer

Question 14

Which statement about H-REAP and FlexConnect APs on a Cisco WLC is false?

A. Cisco CKM roaming is supported within an H-REAP group of APs. B. Cisco CKM roaming is unsupported between local mode APs and H-REAP APs. C. HREAP AP in standalone mode can authenticate new clients for CCKM roaming. D. H-REAP APs can have some locally switched WLANs and some centrally switched WLANs.

Discussion 0

Correct Answer: C Vote an answer