Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) - 350-601 FREE EXAM DUMPS QUESTIONS & ANSWERS

A. Set VRF policy control preference to unenforced. B. Add intra Ext-EPG contract under Web_EPG. C. Check box of forward control proxy ARP. D. Configure intra EPG isolation as enforced.

A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches. B. The hypervisors must be installed to Cisco FlexFlash SD cards. C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches. D. The servers must be discovered, unassociated, and connected to each fabric interconnect. E. The cluster deployment type must support a mix of HDD and SSD.

A. Configure the fabric interconnect in FC switch mode. B. Create the required VSAN in the SAN cloud. C. Configure the fabric interconnect in end-host mode. D. Create a storage connection policy. E. Set FC zoning to disabled when creating the VSAN.

A. NAS is more complex and expensive to implement. B. NAS operates independently of an organization's operating system. C. NAS centralizes storage devices, which makes them easier to manage. D. NAS lacks the scalability and performance of Fibre Channel.

A. copy running-config scp://user@host35/backups/all-config9.bak all-configuration B. create file scp://user@host35/backups/all-config9.bak all-configuration C. copy startup-config scp://user@host35/backups/all-config9.bak all-configuration D. create backup scp://user@host35/backups/all-config9.bak all-configuration

A. Fan modules power cycle. B. The switching module starts a rolling update. C. Each module updates and power cycles. D. The active supervisor updates first.

A. Register the APIC that is connected to the switch. B. Configure the first Cisco APIC controller C. Register all leaf and spine switches D. Configure the leaf switch where the Cisco APIC is connected, using CLI to allow APIC connectivity E. Register the switches that are discovered through LLDP.

A. NFS requires an AAA server. B. NFS is more sensitive to latency. C. NFS natively provides encryption as the default. D. NFS provides easy file sharing.

A. Configure the authentication login to use group RAD1 for console and group RAD2 for remote access. B. Set the RADIUS source interface to be mgmt0 for group RAD1 and VLAN 22 for group RAD2. C. Change the dead timer for RAD1 and RAD2 to 1 minute. D. Configure AAA to send the accounting traffic to RAD1 and RAD2. E. Enable command authorization to RAD1 and RAD2 for all successful logins.