Citrix Architecting a Citrix Networking Solution - 1Y0-440 FREE EXAM DUMPS QUESTIONS & ANSWERS

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for a Citrix ADC design project:
All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configurations and design.
Both external and internal NetScaler MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.
GSLB should resolve both A and AAA DNS queries.
In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.
When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
On the internal NetScaler, both the front-end VIP and backend SNIP will be part of the same subnet.
The external NetScaler will act as default gateway for the backend servers.
All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.
Which design decision must the architect make the design requirements above?

Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.
The following requirements were discussed during the design requirements phase:
The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?

Scenario: A Citrix Architect needs to deploy three VPX instances on NetScaler SDX 11500 device to meet the following design requirements:
Three (3) VPX instances must be provisioned on the SDX device.
Instance 1 must be utilized for deploying NetScaler Gateway virtual server.
Instance 2 must be utilized for deploying load balancing virtual servers for XML, Director, StoreFront, and Active Directory servers.
Separate IP address must be utilized for the communication with XenApp environment and LDAP communication.
Instance 3 must be used for deploying the test environment.
In the test environment, NetScaler Gateway virtual server, load balancing virtual servers for XML, Director, StoreFront and Active Directory servers must be configured.
How many IP addresses will be required to meet these design requirements?

For which three reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new NetScaler in an existing environment? (Choose three.)

Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?

Scenario: More than 10,000 users will access a customer's environment. The current networking infrastructure is capable of supporting the entire workforce of users. However, the number of support staff is limited, and management needs to ensure that they are capable of supporting the full user base.
Which business driver is prioritized, based on the customer's requirements?

Scenario: A Citrix Architect captured the following requirements during a design discussion held for a Citrix ADC design project.
There will be a pair of Citrix ADC MPX appliances deployed in the DMZ and another pair deployed in the internal network High availability will be accessible for each Citrix ADC MPX appliance in both the DMZ (external) and LAN (internal) networks DMZ Citrix ADC MPX appliances will have GSLB configured and deployed in Active/Passive mode Load balancing for the internal Microsoft Exchange servers will be configured on the internal Citrix ADC appliances Load balancing for SAP application servers in the DMZ will be configured on the DMZ Citrix ADC appliances For the DMZ Citrix ADC MPX pair, the data and management traffic will be sent over the same interface.
The DMZ Citrix ADC MPX pair will have three interfaces available.
The users from the DMZ should NOT have access to servers in the internal zone Which deployment mode should the architect use to deploy the Citrix ADC pair in the DMZ?

Scenario: A Citrix Architect needs to plan for a customer environment in which more than 10,000 users will need access. The networking infrastructure needs to be able to handle the expected usage.
Which business driver should be prioritized based on the customer's requirement?

Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion. They have captured the following requirements for the Citrix ADC design project:
* The Citrix Gateway virtual server is integrated with the Citrix Virtual Apps and Desktops environment.
* The authentication must be deployed for the users from the workspacelab.com and vendorlab.com domains.
* The workspacelab users connecting from the internal (workspacelab) network should be authenticated using LDAP.
* The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS
* The vendorlab users should be authenticated using Active Directory Federation Service.
* The user credentials must NOT be shared between workspacelab and vendor) ab.
* Single Sign-on must be performed between F and Citrix Gateway.
* A domain drop down list must be provided if the user connects to the Citrix Gateway virtual server externally.
* The domain of the user connecting externally must be identified using the domain selected from the domain drop down.
At which bind point should the architect bind the domain drop-down schema policy?

Scenario: A Citrix Architect needs to design a new multi-datacenter NetScaler deployment. The customer wants NetScaler to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.

Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?