F5 BIG-IP ASM Specialist - 303 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

An LTM Specialist connects to an LTM device via the serial console cable and receives unreadable output. The LTM Specialist is using the appropriate cable and connecting it to the correct serial port. Which command should the LTM Specialist run through ssh to verify that the baud rate settings for the serial port are correct on the LTM device?

A. tmsh show /sys console B. tmsh edit /sys console C. tmsh show /ltm console D. tmsh list /sys console

Discussion 0

Correct Answer: A Vote an answer

Question 2

An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet. Which configuration option should the LTM Specialist adjust?

A. increase the idle Timeout in a custom TCP profile B. increase the connection limit for pool members C. use a Performance (Layer 4) Virtual Server D. assign a OneConnect profile

Discussion 0

Correct Answer: D Vote an answer

Question 3

An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled. TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool. TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device. What will happen in this scenario?

A. Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit B. Nothing: 2560 TLS transactions per second is within the SSI TPS license limit. C. 560 new TLS transactions will be silently discarded due to the SSL TPS license limit D. 2060 new TLS transactions will be silently discarded due to the SSL TPS license limit

Discussion 0

Correct Answer: C Vote an answer

Question 4

An LTM device pair is configured for failover and connection mirroring. The LTM devices are configured with virtual servers for HTTP, HTTPS with SSL offload, and SSH. An event occurs that causes a failover. HTTP and SSH sessions active at the time of failover remain active, but HTTPS sessions are dropped. What is the root cause of this problem?

A. Connection mirroring is incompatible with clientssl profiles. B. SNAT automap was NOT enabled for the HTTPS virtual servers. C. The SSL certificates on the LTM devices do NOT match. D. Connection mirroring was NOT enabled for the HTTPS virtual servers.

Discussion 0

Correct Answer: A Vote an answer

Question 5

An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances. In which should the LTM Specialist perform this upgrade?

A. Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot B. Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot C. Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot D. Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for FreeCram members. You can sign-up / login (it's free).

Question 6

A development team needs to apply a software fix and troubleshoot one of its servers. The BIG- IP Administrator needs to immediately remove all connections from the BIG-IP system to the back end server. The BIG-IP Administrator checks the Virtual Server configuration and finds that a persistence profile is assigned to it. What should the 8IG-IP Administrator do to meet this requirement?

A. Set the pool member to a Disabled state. B. Set the pool member to a Forced Offline state and manually delete easting connections through the command line. C. Set the pool member to a Disabled state and manually delete existing connections through the command line. D. Set the pool member to a Forced Offline state.

Discussion 0

Correct Answer: B Vote an answer

Question 7

An LTM Specialist observes decreased performance and intermittent connection reap LTM system.

Based on the configuration, which action will address these issues?

A. Use a FastL4 profile on the virtual server B. Use a shorter idle timeout on the TCP profile. C. Use an optimized TCP profile. D. Use a default caching profile on the virtual server.

Discussion 0

Correct Answer: B Vote an answer

Question 8

A virtual server configuration for traffic destined to a server is as shown:

FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129. Based on precedence, which virtual server accepts this traffic?

A. MyVS1 B. MyVS4 C. MyV53 D. MyVS2

Discussion 0

Correct Answer: D Vote an answer

Question 9

The BIG-IP Administrator generates QKView using tmsh command "qkview -SO". In which directory does the BIG-IP appliance save the QKView?

A. /etc/tmp B. /var /tmp/qkview C. /var/tmp D. /shared/qkview

Discussion 0

Correct Answer: C Vote an answer

Question 10

Which two profiles should be used on the virtual server? (Choose two.)
set payload {CACHE :: payload}
}

A. http B. http-transparent C. stream D. webacceleration E. http compression

Discussion 0

Correct Answer: A,D Vote an answer