H3CSE-WLAN - GB0-342-ENU FREE EXAM DUMPS QUESTIONS & ANSWERS

A. MAC Authentication B. PSK certification C. 802.1X Authentication D. Portal Authentication E. PPPOE certification

A. When applying for the Active Key of the wireless controller, you need to provide the relevant information of the device (device serial number, check code) and License Key. B. The license key of the H3C wireless controller is an authorized serial number, such as 173995EA490E3C14A9A66 C. The Active Key applied for is bound to the relevant device, this Active Key can only be used on this device (the relevant information of this device is provided when applying) D. The Active Key applied for is not bound to related devices, and this Active Key can be used on any device of the same model.

A. 1 , 2 , 3 B. 1 , 5 , 9 C. 2 , 7 , 12 D. 1 , 6 , 11

A. 802.11n B. 802.11ax C. 802.11ac D. 802.11a

A. The client can get the IP address of the 10.1.1.0/24 segment B. The client could not get the IP address C. The client can obtain the IP address of the 192.168.0.0/24 segment D. The client can obtain the IP address of the 192.168.2.0/24 segment

A. Configure the same encryption key B. Configure the same wireless access service SSID C. Configure the same working channel D. configure the same mesh-id

A. If the number of users currently connected to this Fat AP is 10, the bandwidth per user cannot exceed 20000/10=2000Kbps. B. If the number of users currently connected to this Fat AP is 10, the maximum bandwidth per user cannot exceed 20000Kbps. C. If the number of users currently connected to this Fat AP is 10, and 5 of them have no traffic, the bandwidth per user cannot exceed 20000/5=4000Kbps. D. The wireless user speed limit function of Fat AP is divided into static speed limit and dynamic speed limit. The above configuration realizes dynamic speed limit.

A. AP B. Terminal equipment used by customers in actual business, such as PDA, WIFI phone, etc. C. wire shark D. All kinds of booster antennas, tapes, straps, etc. E. Digital Camera F. Enterprise class wireless card

A. Education IoT application layer data display is presented through the Oasis cloud management platform. B. The T300 module requires local functions and cannot be powered by the AP. C. The educational Internet of Things mainly collects student health data through smart bracelets and reports it to the server through the T300 module. D. Education IoT Fangdongzhong AP can provide both wireless access and link channel for smart bracelet health data.

A. IEEE B. WAPI Alliance C. IETF D. WIFI Alliance

A. This type of area can be covered by low-power APs. The coverage method can be carried out according to the coverage method of the area with small radius and few users. When covering, it is necessary to pay attention to the frequency isolation of each AP. B. This type of area is the main WLAN indoor application place, such as comprehensive function area, hotel room, etc. This type of area can be divided into small areas according to rooms, walls, columns, etc., which can be regarded as multiple areas with small radius and few users The combination C. When deploying multiple APs in such areas, it is necessary to consider the channel division between APs. The APs are deployed with poor channels to reduce interference. For example, when three APs are deployed, the channels of AP1, AP2, and AP3 can be separated from each other. Set to 1, 6, 11 D. Such areas can be covered by an indoor distributed system, and the antenna feeder system of the original wireless network (such as PHS, CDMA, etc.) can be used to combine the WLAN system, so as to achieve the effect of one AP covering a large area.

A. correct B. error