HP Deploying HP Enterprise Networks - HP0-Y36 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

During a two-month migration project, you are tasked with changing many Cisco switches to HP A-Series switches. This migration will occur over several weeks, and you must try to maintain similar levels of service during the migration. In an effort to expand interoperability between HP-A series and existing equipment, the following commands have been issued on all switch ports of the HP A-Series switches: What is the effect of these commands on ports in this group?

A. Cisco routers, switches, and phones will be able to see HP A-Series hardware. B. Cisco phones can now be discovered and provisioned. C. Only Cisco switches and phones will be able to see the HP A-Series hardware. D. The HP A-Series devices can learn of Cisco devices, however Cisco will not see HP A-Series hardware.

Discussion 0

Correct Answer: B Vote an answer

Question 2

You have been asked to configure OSPF on an HP A-Series switch to accomplish the following:

Which set of configuration definitions accomplishes this?

A. ospf 1 router-id 18.1.1.1 silent-interface g1/0/3 area 0 network 255.255.255.255 0.0.0.0 B. ospf 1 router-id 18.1.1.1 passive-interface g1/0/3 area 0 network 255.255.255.255
0.0.0.0 C. ospf 1 router-id 18.1.1.1 passive-interface g1/0/3 area 0 network 0.0.0.0
255.255.255.255 D. ospf 1 router-id 18.1.1.1 silent-interface g1/0/3 area 0 network 0.0.0.0 255.255.255.255

Discussion 0

Correct Answer: D Vote an answer

Question 3

Click the Exhibit button.

Router-1 and Router-2 are BGP peers. Router-2 and Router-3 are BGP peers. However, Router-3 has not learned the 16.0.0.0/8 BGP route. How can you resolve this issue? (Select two.)

A. Configure Router-2 as a route reflector and Router-1 and Router-3 as clients. B. Prepend AS1 to the 16.0.0.0/8 route on Router-1. C. Enable IGP synchronization on all routers. D. Establish a physical link between Router-1 and Router-3. E. Enable BGP peering between Router-1 and Router-3. F. Adjust the local preference of 16.0.0.0/8 on Router-1.

Discussion 0

Correct Answer: A,E Vote an answer

Question 4

Click the Exhibit button.

Router-2 is configured for RIP version 2 on all interfaces. Router-1 and Router-3 are configured for RIP version 2 on all interfaces except for interface G 1/0/3.
Router-2 is also configured for OSPF on all interfaces. Router-1 and Router-3 are also configured for OSPF on all interfaces except for interface G 1/0/3.
A static route to subnet 16.1.2.0 /24 is configured on Router-1 pointing directly to Router-3. All other routing settings are set to default values. Host A sends an IP packet to Host B.
Which statement is true regarding this IP packet sourced from Host A and destined for Host B?

A. The IP packet travels from Router-1 to Router-3 B. The IP packet is dropped by Router-1. C. The IP packet travels from Router-1 to Router-2 to Router-3 D. The IP packet loops between Router-1 and Router-2.

Discussion 0

Correct Answer: A Vote an answer

Question 5

Click the Exhibit button to examine a network diagram and router configuration.

All routers in AS-100 are configured with OSPF as the IGP. All links shown are Gigabit Ethernet. All routers are in ospf area 0 and include the following command:

ospf 1 bandwidth-reference 40000
A Gigabit Ethernet link is added connecting Router-2 to Router-3. The ospf cost for this new link is set to 41 on both Router-2 and Router-3.What is the traffic flow from AS-30 to AS-20?

A. Initial packets flow from Router-3 to Router-1 to Router-2, then from Router-3 directly to Router-2. B. Packets are dropped at Router-1. C. Packets flow from Router-3 to Router-1 to Router-2. D. Packets flow from Router-3 to Router-2. E. Packets are dropped at Router-3.

Discussion 0

Correct Answer: D Vote an answer

Question 6

Click the Exhibit button.

Given the following configuration and topology:

What happens when Switch 4 completes its boot cycle and joins the MSTP domain?

A. MSTP updates the region configuration of the switches with lower revision numbers and creates additional VLANs. B. MSTP detects an inconsistency between region configurations by analyzing the digest in the BPDU, then uses Commons Spanning tree between Switch 1 and Switch 4, and Switch 2 and Switch 4. C. MSTP detects an inconsistency between region configurations by analyzing the digest in the BPDU, then uses Commons Spanning tree between Switch 1 and Switch 4, and Switch 2 and Switch 4. D. MSTP detects an inconsistency between region configurations by analyzing the digest in the BPDU, then uses Commons Spanning tree between Switch 1 and Switch 4, and Switch 2 and Switch 4. E. MSTP updates the region configuration of switches with older revisions and the additional VLANs are not created. F. MSTP does not modify the region configuration, and only traffic for instances 1 and 2 are carried over trunk links.

Discussion 0

Correct Answer: E Vote an answer

Question 7

Click the Exhibit button and view both exhibits. AS 20 advertises prefix 20.0.0.0 /8, and AS 30 advertises prefix 30.0.0.0 /8. On Router-2,

what is the BGP Next Hop attribute for prefix 30.0.0.0 /8?

A. 16.2.2.2 B. 16.3.3.3 C. 30.1.1.1 D. 16.0.0.3 E. 16.0.0.1 F. 20.1.1.1

Discussion 0

Correct Answer: D Vote an answer

Question 8

Click the Exhibit button and examine both exhibits.

A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The address blocks chosen by the customers for each site are shown in the following chart:

The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the MPLS LSR-ID. All PE routers in AS can ping internal networks at Customer A site; however, Customer A Site 2 cannot ping the internal networks at Customer A Site 1.
Which commands on PE-1 are most likely to resolve this problem?

A. rip 2 vpn-instance Cust-A import-route tagp B. bgp 100 import-route rip 2 C. ospf
import-route vpn-instance Cust-A D. ip vpn-instance Cust-A rip 2 version 2 network 10.0.0.0 E. bgp 100 import-route vpn-instance Cust-A F. ipv4-family vpn-instance Cust-A import-route rip 2

Discussion 0

Correct Answer: A Vote an answer