HP Aruba Certified Mobility Associate 6.1 - HPE6-A19 FREE EXAM DUMPS QUESTIONS & ANSWERS

A. 2.4 MHz B. 5 MHz C. 900 MHz D. 2.4 GHz E. 5 GHz

A. DHCP from global content server for Remote APs B. Address must be statically assigned C. DHCP server connected to the Remote AP's controller D. DHCP server at a branch office E. DHCP server inside the Remote AP

A. Set the horizontal plane on each floor B. Sets the proper vertical floor plan alignment C. Sets the North/South orientation of the building D. Allows the planner to set the directional antenna orientation E. Give the option to resize a floor

A. After each license is installed B. Before any other configuration can take place C. Once the last License is added D. A reboot is not required until you have completed the configuration wizard E. Only if the Policy Enforcement Firewall license is installed

A. To tell down stream routers to use a more appropriate router B. To let your users know they they are in violation of corporate policies C. To aid in troubleshooting firewall policy configuration D. To let the system count the violations E. To let hackers know which ports are open on your firewall

A. Uplink ports on the Mobility Controller can use 802.1q tagging B. The Mobility Controller is the client's default router. C. VLANs cannot have IP addresses D. The Mobility Controller acts as a bridge. E. All stations must use the same VLAN

A. Create a different policy for each unique rule B. Create different policies for access to different servers C. Write rules from least specific to most specific D. Take actions like blacklisting when users violate policies E. Use aliases when possible

A. The Mobility Controller is the client's default router. B. OSPF must be configured C. The Mobility Controller supports BGP. D. DHCP can be provided by the network infrastructure or the Mobility Controller. E. The Mobility Controller acts as a bridge.