HP Aruba Certified Mobility Professional - HPE6-A71 FREE EXAM DUMPS QUESTIONS & ANSWERS

An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the RAP, the administrator must enter a user's credentials. What is thepurpose of these credentials?

An administrator configures an ArubaOS-Switch for per-user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MC)? (Select two.)

Refer to the exhibit.

The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in theexhibit. What can the administrator determine about the configuration of the AP?

Refer to the exhibit.

What can an administrator determine from this Aruba device output?

An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM). The administrator knows that the auto roll-back feature will revert the managed controller to a previous configuration that was used prior to the change.
Which command can the administrator use to validate that the rollback process is successful?

An administrator implements per-user tunneled node that involves ArubaOS-Switches and Aruba Mobility Controllers (MCs).What always happens when a wired client connects to the network?

An administrator wants to use AirWave to manage the configuration policy settings of a set of ArubaOS-Switches. Where should the administrator perform this action?

An administrator sets up a network scan set in AirWave to scan a subnet to identify devices for a firmware upgrade. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access.
However, SSH access fails and the administrator must manually configure the SSH credentials used for all of thesedevices.
What should the administrator have done before running the network scan?

An administrator creates a mesh cluster profile and has defined the RF band and cluster name. What else must the administrator configure in the profile?

An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that whenusers connect wirelessly to the RAP, a user role correctly restricts their traffic.
But, when users connect with their wired desktops, they are assigned an initial role and routed to a Captive Portal page.
What must the administrator do to enable desktopusage based on the user's role assignment?

Refer tothe exhibits.
Exhibit 1: WLAN VAP configuration

Exhibit 2: Microsoft NPS server configuration

Exhibit 3: Server group configuration for the VAP.

An employee authenticates with the username employee and the correct password. However, once theuser authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role.
What should the administrator do to solve this problem?

Refer to the exhibit. Anadministrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADUIS AAA server authenticates clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from ControllerB is 10.254.1.2.

By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?

Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS.8.x?

In a cluster-controller environment, which Aruba component in a network builds a cache table of mDNS records that can be used to help user devices access Apple Bonjour services?

An administrator implements clustering on Aruba Mobility Controllers (MCs) that runArubaOS 8.x. An AP is connected to a cluster member. The administrator accidentally powers off the AP.
How does the AP determine that it should failover to an alternate controller in the cluster?