HP Aruba Certified Network Security Professional - HPE7-A02 FREE EXAM DUMPS QUESTIONS & ANSWERS

You are setting up HPE Aruba Networking SSE to detect threats as remote users browse the internet.
What is part of this process?

A company wants to enforce these controls on clients assigned to "role1":
DHCP permitted
DNS permitted
All other access to 10.0.0.0/8 denied
All other traffic permitted
You have so far configured these settings:
class ip class1
10 match udp any any eq 67
20 match udp any any eq 53
30 match tcp any any eq 53
class ip class2
10 match any any 10.0.0.0/255.0.0.0
port-access policy policy1
10 class ip class1
20 class ip class2 action drop
port-access role role1
associate policy policy1
What change should you make to fulfill the company's requirements?

A company needs you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one task you should do to prepare?

Which endpoint classification method requires direct device interrogation for identification?

A company is using HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI). CPDI and CPPM are integrated. The security staff wants you to show them a list of all devices that are contacting a specific known command-and- control center.
What should you do?

A company already uses HPE Aruba Networking ClearPass Policy Manager (CPPM) as the RADIUS server for authenticating wireless clients with 802.1X. Now you are setting up 802.1X on AOS-CX switches to authenticate many of those same clients on wired connections. You decide to copy CPPM's wireless 802.1X service and then edit it with a new name and enforcement policy. What else must you change for authentication to work properly?

Refer to the exhibit.

You are reviewing packets in Wireshark. The capture shows traffic from source IP address
10.1.14.10 to several destinations in the 10.1.15.0/24 network. The packets use TCP flags FIN, PSH, and URG together.
What can you interpret from the packets that you see here?

You are setting up HPE Aruba Networking SSE. Which use case requires you to apply a non- default device posture in a rule?

You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VoIP phones are assigned to the "voice" role and need to send traffic that is tagged for VLAN 12. Where should you configure VLAN 12?

A company lacks visibility into the many different types of user and loT devices deployed in its internal network, making it hard for the security team to address those devices.
Which HPE Aruba Networking solution should you recommend to resolve this issue?

A company wants to implement Virtual Network based Tunneling (VNBT) on a particular group of users and assign those users to an overlay network with VNI 3000.
Assume that an AOS-CX switch is already set up to:
- Implement 802.1X to HPE Aruba Networking ClearPass Policy Manager (CPPM)
- Participate in an EVPN VXLAN solution that includes VNI 3000
Which setting should you configure in the users' AOS-CX role to apply VNBT to them when they connect?