IBM Virtualization Technical Support for AIX and Linux - v2 - 000-109 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

During the validation of a planned partition migration between managed servers, the following error message is displayed:HSCLA297 The DLPAR Resource Manager (DRM) capability bits 0x0 for mover service partition (MSP) VIOS indicate that partition mobility functions are not supported on the partition. What is the most likely cause of this error?

A. An RMC error has occurred on one of the VIOS partitions. B. The network connection to the mobile partition is not working. C. The mobile partition has an HEA logical port configured. D. There is a mismatch in VIO Server versions between the two systems.

Discussion 0

Correct Answer: A Vote an answer

Question 2

Which backup scenario will enable a VIO server to be recovered as quickly as possible in the event of a disaster?

A. cfgsv-is rootvg savevgstruct rootvg backupios -file /backups -mksysb /home/ios/vgbackups B. mknfsmnt-f/backups-d/backups-hnim1 -trw-wbg-S mount/backups backupios -file /backups/viol .mksysb C. mkvg-vgbackupvghdisk1 crfs -vjfs2 -g backupvg -m /backups -A yes -p rw -a size=10G -a logname=INLINE mount/backups backupios -file /backups/vio1 .mksysb D. mkdir/backups savevgstruct rootvg backupios -file /backups -mksysb /home/ios/vgbackups

Discussion 0

Correct Answer: B Vote an answer

Question 3

A VIO server provides a virtual Fibre Channel adapter to each of 2 LPARs. The HBA has recently been replaced on the VIO server. After the VIO server was rebooted, the clients LPARs were also rebooted. The LUNs are now showing as "Defined" instead of "Available". What is the cause?

A. The client virtual Fibre Channel adapters were configured via DLPAR. B. The client virtual Fibre Channel needs a map to the new WWPNs. C. The HBA created new WWPNs on the virtual Fibre Channel adapters. D. The HBA requires an initial configuration to be performed.

Discussion 0

Correct Answer: A Vote an answer

Question 4

A partition that uses an LHEA for network connectivity needs to be moved to another managed system. The administrator has the LHEA configured in an Etherchannel with a virtual Ethernet adapter as the backup adapter. When attempting to perform the migration using the Migration Wizard, it fails. What is necessary for the migration to be successful?

A. The LHEA must be removed from the Etherchannel before the migration. B. The destination server does not have an LHEA available for the migration. C. The HMC command line interface needs to be used to perform the migration. D. The migration must be initiated from the opertaing systems of the mobile partition.

Discussion 0

Correct Answer: D Vote an answer

Question 5

An administrator is attempting to apply a Fix Pack to an VIO server which is not connected to a network.
The administrator loaded the Fix Pack DVD into the drive. The updates command fails with an error stating that the local SAS optical drive is busy.
What must be verified before attempting to use the optical drive?

A. That the appropriate SAS adapter is allocated to the VIO LPAR. B. That the device is mounted with Read/Write permissions. C. That the media repository on the VIO LPAR is forced offline. D. That the optical device is allocated to the VIO LPAR.

Discussion 0

Correct Answer: D Vote an answer

Question 6

Where can an administrator find the implementation process for configuring a Power 795 to run in TurboCore mode?

A. IBM InfoCenter B. IBM Systems Director C. Performance Toolbox for AIX D. IBM System Planning Tool

Discussion 0

Correct Answer: A Vote an answer

Question 7

A VIO client is using a virtual network adapter to supply network connectivity to VLAN 10 from VIOL The VIO client now needs to access VLAN 20 which is supplied from VI02.
How can this be achieved?

A. Create a new virtual Ethernet adapter to access the external network on VIOL1.
Add an additional virtual network adapter to the VIO client using DLPAR.
Modify the profile to reflect these changes. B. Change the VIO client profile to reflect the additional virtual network adapter.
Use DLPAR to add a virtual network adapter onto the VIO client with VLAN 20. C. On VIOL use the mkvdev command to add VLAN 20 to the SEA.
Add an alias to the VIO client Ethernet interface with an IP address of the VLAN 20 subnet. D. Change the VI01 profile to reflect the changed virtual network adapter.
Use DLPAR to change the VI01 virtual network adapter to use VLAN 20.

Discussion 0

Correct Answer: B Vote an answer

Question 8

What is the default weight when creating an uncapped, shared processor LPAR?

A. 128 B. 256 C. 32 D. 64

Discussion 0

Correct Answer: A Vote an answer

Question 9

An administrator plans to implement Active Memory Expansion on several LPARs on a Power 770 system. Which tool should be used to determine the recommended LPAR settings for Active Memory Expansion?

A. amepat B. amestat C. amelpar D. amemon

Discussion 0

Correct Answer: A Vote an answer

Question 10

An AIX LPAR has a disk drive known as hdisk17. The administrator would like to change the name of the disk to redolog0. Which command will achieve this?

A. chdsk -dev hdisk17 -id redolog0 B. chdev -l hdisk17 -a name=redolog0 C. rendev -l hdisk17 -n redolog0 D. mv /dev/hdisk17 /dev/redolog0

Discussion 0

Correct Answer: C Vote an answer