IBM Assessment: Virtualization Technical Support for IBM i -v1 - A4040-121 FREE EXAM DUMPS QUESTIONS & ANSWERS]

Question 1

A client IBM i partition is being planned. Dual VIO Servers will each provide 40 SAN disks to the client partition, mirrored in IBM i at the adapter level (see example below).

Considering both the host and client partitions, what is the minimum number of vSCSI adapters required to support this disk configuration?

A. 6 B. 8 C. 12 D. 16 E. 4

Discussion 0

Correct Answer: C Vote an answer

Question 2

When using SAN flash copy to clone a disk image for an IBM i client LPAR, message 'CP1096E Disk unit connection is missing' appears in the history log of the newly created client LPAR.
A check in SST shows the expected disk paths as 'active' and extra disk paths with a status of 'missing', a result of the reconfiguration of the disk subsystem.
What is necessary to avoid the warnings and to clean up the disk paths?

A. Run the multipath resetter Advanced Analysis macro in SST. B. Remove the missing path(s) through Hardware Service Manager. C. Use the Disk Path Manager tool in System Director Navigator. D. Re-IPL the system.

Discussion 0

Correct Answer: A Vote an answer

Question 3

An administrator is planning to upgrade their VIO Server (VIOS) 1.5 partition to the latest level using DVD media. The VIOS partition is HMC managed and contained in the CEO.
What does the administrator require to perform the upgrade?

A. The Migration DVD, Update DVD and latest Fixes on media utilizing the HMO media tray B. The Installation DVD, Update DVD and latest Fixes on media utilizing the HMO media tray C. The Installation DVD, Update DVD and latest Fixes on media utilizing the CEO media tray D. The Migration DVD, Update DVD and latest Fixes on media utilizing the CEO media tray

Discussion 0

Correct Answer: D Vote an answer

Question 4

A customer has a 4-partition Power 720 running firmware level 01_AL730_069. They want to load and activate the latest firmware, 01_AL730_085_060, onto their managed system during normal operations.
What is the correct way to do this?

A. From the HMC, select Update from the left panel Select the managed system Then select Concurrent Firmware update B. On the Service partition, load and apply immediate the corresponding MH PTF for 01_AL730_085. C. On the Service partition, load the corresponding MH PTF for 01_AL730.
Start Service tools
Go to Advance Functions
Select Concurrent Firmware Update by entering "1"to run. D. From the HMC, select Update from the left panel Select the managed system Then Change License Code for current release

Discussion 0

Correct Answer: D Vote an answer

Question 5

A client plans to add a Power 770 server to a POWEP6 environment. What resource can the administrator use to determine if the HMC is at the correct level to support the new server firmware?

A. ASMI B. Power Code Matrix C. System Planning Tool D. HMC Service Agent

Discussion 0

Correct Answer: B Vote an answer

Question 6

An administrator wants to share a fibre attached TS3100 tape library between multiple IBM i 7.1 partitions. The system contains a PC #5774 - 4Gb fibre adapter and uses an IBM fibre switch. All IBM i partitions are hosted by VIO Server (VIOS).
How could the administrator configure the sharing of the tape library?

A. In the HMC, select the VIOS partition, then select Operations - Schedule Operations - Options New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter between partitions. B. Create a script that can be called after each backup job in a partition finishes, which will move the fibre adapter to the next partition C. Configure NPIV within VIOS, then configure each partition to use NPIV to share the tape library. D. In the HMC, select the host Power System, then select Operations - Schedule Operations New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter between partitions.

Discussion 0

Correct Answer: B Vote an answer

Question 7

There are three Power Systems servers with redundant FSPs, and two HMCs. One HMC is in the data center while the second is in operations. Each HMC is connected to its own private network and each of the three systems are connected to both HMCs.
Two of the Power Systems servers and the HMC in the data center have been moved across the room. They have been reconnected to the HMC network, and power has been applied to the HMC and the first server. On the data center HMC the server shows up twice, once with "Authentication failed" and the second with "no connection." Connecting to ASM yields "incorrect password" on the first instance, but works on the second instance.
What the most likely cause?

A. The firmware on the service processors is out of sync. B. The service processors have different HMC access passwords. C. Power was applied to the server before the HMC was up and running. D. The data center and operations HMCs are now on the same network.

Discussion 0

Correct Answer: D Vote an answer

Question 8

A small financial institution has a client IBM i 7.1 partition, hosted by a VIO Server, using internal disk. All disk storage is provided by VIOS. Bank policy requires all system and user data on disk to be duplicated.
Which option will satisfy the policy at the lowest cost without impacting performance?

A. Create two iASP5 with disk compression enabled.
Move the application into the first iASP and mirror it to the second iASP with 5770-SS1 HA
Switchable Resources. B. Create an iASP, and copy each of the libraries containing the application into the iASP.
UsePowerHA to mirror the iASP and*SYSBAS. C. Implement a secondVIOServer with its own storage and assign itto the client IBM i partition.
Mirror the drives provided by the firstVIOServer to the drives provided by the secondVIOServer. D. Add a V7000 SAN with sufficient storage to create two copies of the storage, and use a
singleVIOServer to replicate the storage.

Discussion 0

Correct Answer: C Vote an answer

Question 9

After installing a client AIX partition, supported by a hosting IBM i 7.1 partition, each subsequent IPL of the AIX partition boots to "System Management Services" mode.
Where should the change to boot the AIX environment to "Normal" mode be made?

A. In the client AIX partition --> bosboot --> bosboot -n -f B. In the hosting IBM i partition profile --> Settings --> Boot Mode C. In the "Properties" section of the AIX partition --> Keylock Position D. In the client AIX partition profile --> Settings --> Boot Mode

Discussion 0

Correct Answer: D Vote an answer