Microsoft Networking with Windows Server 2016 - 070-741 FREE EXAM DUMPS QUESTIONS & ANSWERS

You company has a main office in London. The company has 1,000 users who are located in many countries.
You plan to deploy a large remote access solution for the company.
The London office has three servers named Server1, Server2, and Server3 that run Windows Server 2016.
You plan to use Server1 as a VPN server, Server2 as a RADIUS proxy, and Server3 as a RADIUS server.
You need to configure Server2 to support the planned deployment.
Which three actions should you perform on Server2? Each correct answer presents part of the solution.

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host.
You run the commands shown in the following graphic:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 connects to your corporate network. The Corporate network uses the 10.10.0.0/16 address space.
Server1 hosts a virtual machine named VM1, VM1 is configured to have an IP addresses of 172.16.1.54/16.
You need to ensure that VM1 can access the resources on the corporate network.
What should you do? To answer, select the appropriate options in the answer area.

You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server! is configured to obtain an IP address automatically.
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?

You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.


Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You increase the scope size.
Does this meet the goal?

You are deploying DirectAccess to a server named DA1. DA1 will be located behind a firewall and will have a single network adapter. The intermediary network will be IPv4.
You need to configure the firewall to support DirectAccess.
Which firewall rules should you create for each type of traffic? To answer, drag the appropriate ports and protocols to the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016.
You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
You discover that unauthorized computers can receive an IP address from Server1.
You need to ensure that only authorized computers can receive an IP address from Server1.
Solution: You run the following command.
Set-DhcpServerv4FilterList -ComputerName Server1 -Allow False -Deny True Does this meet the goal?

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.

Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.

You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.
Which two actions should you perform? Each correct answer presents part of the solution.

You have a DHCP server named Server1 that runs Windows Server 2016.
You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?

Your Network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2.
You plan to install the DHCP Server role on DC1 and DC2 and configure DC1 and DC2 to manage PTR records on behalf of domain-joined computers. You need to ensure that the domain controllers will be able to keep the PTR records up to date, regardless of which domain controller created the records. What should you do?

You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server1 is configured to obtain an IP address automatically.
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?

You have a DNS server named DNS1 that hosts several forward lookup zones.
You discover that dynamic records exist for computers that were removed from your network several months ago.
You need to ensure that the records are removed automatically.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.