NFPA Certified Water-Based Systems Professionals - CWBSP FREE EXAM DUMPS QUESTIONS & ANSWERS

A sprinkler system employing automatic sprinklers that are attached to a piping system that contains air that might or might not be under pressure, with a supplemental detection system installed in the same areas as the sprinklers, is known as a:

Which of the following should be considered when choosing an occupancy?

Which of the following is a mandatory referenced publication in NFPA 13?

What piping material is acceptable for the suction and discharge piping pressure maintenance pumps?

When utilizing ordinary temperature CMDA sprinkler protection for a single-row rack storage of an unencapsulated Class I commodity stored 15 ft (4.6 m) high without in-rack sprinklers with 8 ft (2.4 m) aisles, what is the minimum design density required?

In a three-story apartment building protected with an NFPA 13R system utilizing quick-response sprinklers, the minimum density/area requirement shall be?

Which Occupancy Classification is defined as occupancies or portions of other occupancies where combustibility is low, quantity of combustibles is moderate, stockpiles of combustibles do not exceed 8 ft (2.4 m), and fires with moderate rates of heat release are expected?

What ASTM standard covers the manufacture of chlorinated polyvinyl chloride (CPVC) pipe, allowed to be used in fire sprinkler systems?

An existing sprinkler system in a 25 ft (1.5 m) tall building is found to be designed using K-8.0 (115) high temperature control mode density/area (CMDA) sprinklers with a design criteria of 0.35 gpm/ft2 (13.3 mm/min) over
2000 ft2 (186 m2). What is the maximum storage height permitted for double-row rack storage with 8 ft (2.4 m) aisles of a nonencapsulated Class IV commodity?

When backflow prevention valves are installed on existing pipe scheduled systems, the friction losses of the device shall be accounted for when determining