No.# B


https://dl3.checkpoint.com/paid/1f/1f850d1640792cf885336cc6ae8b2743/CP_R80_ReleaseNotes.pdf?HashKey=1612801115_40ec6ba5dec50a798c68e2077ac923e4&xtn=.pdf

Supported Upgrade Paths
You can upgrade these Security Management Server and Multi-Domain Server versions to R80
with Database Migration:
R75.40, R75.45, R75.46, R75.47, R75.40 VS, R76, R77, R77.10, R77.20, and R77.30.

No.# C
Threat Extraction technology to eliminate threats and promptly deliver safe, sanitized content to its intended destination. Original files are accessible after undergoing background analysis by the Threat Emulation engine.

No.# D
Threat Extraction technology to eliminate threats and promptly deliver safe, sanitized content to its intended destination. Original files are accessible after undergoing background analysis by the Threat Emulation engine.

No.# fw ctl multik set_mode 9 enable for CheckPoint R77.30

Configuration on Security Gateway R80.10 and higher
CoreXL Dynamic Dispatcher is enabled by default. Meaning, CoreXL dynamically assigns new connections to a CoreXL FW instance based on the utilization of CPU cores.

Important Notes:

Starting R80.20 VSX fully support dynamic dispatcher
Refer to "Limitations" section.
Refer to "FAQ" section.
Instructions:

To check the current mode on Security Gateway:

[[email protected]]# fw ctl multik dynamic_dispatching get_mode

Example output:

[[email protected]:0]# fw ctl multik dynamic_dispatching get_mode
Current mode is On
[[email protected]:0]#
To enable the CoreXL Dynamic Dispatcher on Security Gateway:

Note: In cluster environment, this procedure must be performed on all members of the cluster. Since a reboot is required, it is recommended to follow the Installation and Upgrade Guide - Chapter 'Upgrading ClusterXL Deployments' - either "Minimal Effort Upgrade" procedure, or "Zero Downtime Upgrade" procedure.

Run in Expert mode:

[[email protected]]# fw ctl multik dynamic_dispatching on

Example output:

[[email protected]:0]# fw ctl multik dynamic_dispatching on
New mode is: On
Please reboot the system
[[email protected]:0]#
Reboot (in cluster, this might cause fail-over)....

No.# Troubleshooting Profiles
IPS includes the ability to temporarily stop protections set to Prevent from blocking traffic. This is useful when troubleshooting an issue with network traffic.

To enable Detect-Only for Troubleshooting:

Select IPS > Profiles.
Select a profile and click Edit.
The Profile Properties window appears.

Select Troubleshooting.
Click on the Detect-Only for Troubleshooting icon.
Once you have done this, all protections set to Prevent will allow traffic to pass, but will continue to track threats according to its Track configuration.

No.# SmartView Web Application

A SmartEvent Web application. It has the same real-time event monitoring and analysis views as SmartConsole, with the convenience of not having to install a client.

Browse to: https://<Server IP>/smartview/ where Server IP is IP address of the Security Management Server or SmartEvent server.

No.# Session unique identifier. Enter this session unique identifier in the 'X-chkp-sid' header of each request.
https://sc1.checkpoint.com/documents/latest/APIs/#web/login~v1.7%20