[Version: 2020-06-22, 208q] Free Actual Huawei H12-221-ENU Exam Questions

Huawei.H12-221-ENU.v2020-06-22.q208

Exam Code:	H12-221-ENU
Exam Name:	HCIP-Routing&Switching-IERS(Huawei Certified ICT Professional-Implementing Enterprise Routing and Switching Network)
Certification Provider:	Huawei
Free Question Number:	208
Version:	v2020-06-22
Rating:
# of views:	306
# of Questions views:	7403
	Start Practice Test

Valid H12-221-ENU Dumps shared by Lead1Pass.com for Helping Passing H12-221-ENU Exam! Lead1Pass.com now offer the newest H12-221-ENU exam dumps, the Lead1Pass.com H12-221-ENU exam questions have been updated and answers have been corrected get the newest Lead1Pass.com H12-221-ENU dumps with Test Engine here:

Access Premium Version
(597 Q&As Dumps, 40%OFF Special Discount: freecram)

Exam Question List: Question 1: Which of the following descriptions are incorrect regarding ...; Question 2: In the static LACP mode, the correct description of the acti...; Question 3: In a network environment, there are both switches that run R...; Question 4: What kinds of special areas does OSPF define? (Multiple Choi...; Question 5: In order to provide different services to different users or...; Question 6: Port isolation enables the isolation of communication betwee...; Question 7: The following is a partial output message of the router RTB....; Question 8: A route-policy may have multiple nodes. Different node numbe...; Question 9: Which of the following about the OSPF protocol is correct? (...; Question 10: The correct description of the LSA is:...; Question 11: What are the advantages of IS-IS compared to OSPF? (Multiple...; Question 12: OSPF runs directly over the TCP protocol and uses TCP port n...; Question 13: The address prefix list uses the source address, the destina...; Question 14: Which of the following description about OSPF default route ...; Question 15: Which of the following description about Local-Preference an...; Question 16: Which of the following descriptions is wrong in the process ...; Question 17: Which of the following descriptions is correct about BGP Loc...; Question 18: In the Established state, the BCP can exchange Update, Keepa...; Question 19: The following is a partial configuration of a router. The co...; Question 20: To avoid loops between areas, OSPF stipulates that routing i...; Question 21: Which description about the characteristics of the routing p...; Question 22: Which of the following description of BGP is wrong? (Multipl...; Question 23: The following is a partial output configuration of the Huawe...; Question 24: The description of the network command description in BGP, w...; Question 25: What are the commands that can check OSPF neighbors on the V...; Question 26: The state of the BGP neighbor establishment process exists a...; Question 27: Which description of OSPF route aggregation commands is corr...; Question 28: For link-state routing protocols, in the direction of routin...; Question 29: By default, the BGP speaker must set up an IBGP connection w...; Question 30: The following description of EGP and IGP, which is wrong?...; Question 31: Which description about the permanent multicast address is w...; Question 32: The following is a partial configuration command of the Huaw...; Question 33: About the OSPF command description, which on is incorrect? (...; Question 34: The route injected into the BGP through the redistributed co...; Question 35: Which of the following are the type of secure MAC address in...; Question 36: Regarding the description of the working mechanism of IGMP S...; Question 37: In the BGP routing rules, which is the priority judgment pri...; Question 38: In the RSTP network as shown in the figure, according to the...; Question 39: Which of the following tools is used to filter routing infor...; Question 40: Which main steps does the IS-IS protocol route calculation m...; Question 41: Which multicast MAC address is used by the Level-1 router as...; Question 42: About the description of BGP loop protection, which is corre...; Question 43: When multiple routing tools are configured for route filteri...; Question 44: About the description of IGMP Snooping, which of the followi...; Question 45: Both policy routing and routing policies can affect the forw...; Question 46: Which description about BGP state machine is wrong?...; Question 47: When OSPF is running on a broadcast network, DR and BDR need...; Question 48: OSPF divides the boundaries of the area on the router....; Question 49: Which of the following description about the routing policy ...; Question 50: One of the features of OSPF is that it only supports MD5 aut...; Question 51: Which of the following descriptions are correct about BGP Lo...; Question 52: Which of the following description of OSPF features is corre...; Question 53: Regarding the description of PIM-DM, which is wrong?...; Question 54: RSTP convergence speed is faster than STP. Which of the foll...; Question 55: Which of the description of BGP packet types and packet char...; Question 56: After the RPT tree is established, which description about t...; Question 57: Regarding OSPF multi-process, which is wrong?...; Question 58: Different port roles are defined in the RSTP protocol, the r...; Question 59: The following is part of the configuration information of th...; Question 60: In the format of configuring BPDU packets, in addition to en...; Question 61: About the Origin attribute of BGP, which of the following de...; Question 62: In the network shown in the figure, three switches run RSTP....; Question 63: About the basic concepts of link aggregation, the following ...; Question 64: Which of the following description of the rules of route fil...; Question 65: In PIM-SM, the description of the RP, which is wrong?...; Question 66: Which of the following description of the distribution tree ...; Question 67: Link Aggregation is a method of bundling a set of physical i...; Question 68: By default, when the route-policy of a BGP neighbor is chang...; Question 69: Which of the following descriptions are true about the OSPF ...; Question 70: Which of the description about the port isolation of Huawei ...; Question 71: Which of the following description of AS_PATH is wrong?...; Question 72: BGP is an inter-domain routing protocol. Which of the follow...; Question 73: Which one is wrong with the virtual connection in OSPF?...; Question 74: <Quidway>display current-configuration # multicast rou...; Question 75: The prefix (IP-Prefix) can be used for routing information f...; Question 76: Which of the following description about OSPF is correct?...; Question 77: Compared with STP, the RSTP protocol defines different port ...; Question 78: The ABR is used to connect the backbone area and non-backbon...; Question 79: In OSPF protocol, which of the following statements is wrong...; Question 80: When configuring BGP, this type of alarm is generated: BGP/2...; Question 81: In a network running STP, multiple topology change informati...; Question 82: Compared with the OSPF protocol. Which of the following char...; Question 83: Which of the following conditions can cause multicast traffi...; Question 84: The following statement about OSPF neighbor information: (Ex...; Question 85: Which description of this configuration is wrong? (Exhibit)...; Question 86: What kind of BGP routes will send BGP neighbors without enab...; Question 87: Which services and functions can the ACL be applied to in th...; Question 88: IS-IS cannot be run on P2MP ( Point to MultiPoint ) ....; Question 89: In the NBMA network, the unicast packets are? (Multiple choi...; Question 90: In BGP routing rules, routes with high MED values take prece...; Question 91: Which of the following commands can enable the IS-IS protoco...; Question 92: Which of the following is the default route that OSPF suppor...; Question 93: When the Hold Time parameter negotiated by the two BGP neigh...; Question 94: MSTP has different port roles. Which of the following statem...; Question 95: The routing tool route-policy can filter and set BGP attribu...; Question 96: For IPv4, according to the address space of the SSM range al...; Question 97: The inter-area route summarization function is configured in...; Question 98: The BGP Local_Pref attribute is an optional transition attri...; Question 99: When the BGP Notification packet Error Code is 2, it indicat...; Question 100: Which of the following BGP attributes are recognized as mand...; Question 101: IGMP stipulates that when there are multiple routers in shar...; Question 102: BGP recognized community attributes are: (Multiple Choice)...; Question 103: In the same LAN, if some IGMPv1 routers exist in the LAN, IG...; Question 104: The import-route limit command cannot limit the maximum numb...; Question 105: Which of the following causes the BGP neighbor relationship ...; Question 106: In the format of configuring BPDU packets, in addition to en...; Question 107: The BGP protocol has a type of message periodically sent bet...; Question 108: IGMPv1 contains only two message types: membership query and...; Question 109: By default, VRP automatically aggregates the routes imported...; Question 110: The source tree uses the shortest path from the multicast so...; Question 111: About MUX VLAN, which is correct?...; Question 112: Run MSTP on the network. When you view the configuration on ...; Question 113: Different network types of the OSPF protocol can form adjace...; Question 114: Which of the following descriptions are correct about the pr...; Question 115: The BGP protocol has a message that is periodically sent bet...; Question 116: Which of the following protocols support the multicast ASM m...; Question 117: The following is a output information of a router: (Exhibit)...; Question 118: Which description is correct about the IGMP Snooping mechani...; Question 119: Which of the following descriptions of the OSPF message is c...; Question 120: Which of the following description of the virtual link is wr...; Question 121: Router ID must be published in OSP...; Question 122: The following describes the information contained in the OPE...; Question 123: Which types of metrics are supported by IS-IS protocol?...; Question 124: Multicast related protocols do not include:...; Question 125: If the receiver does not exist in the PIM-SM network, the ro...; Question 126: An Access Control List (ACL) can be used to match routing in...; Question 127: Route filtering can filter routing information....; Question 128: Which of the following configurations must be included in or...; Question 129: Which description about the BGP route advertisement principl...; Question 130: Which route prefixes in the following options will be deny w...; Question 131: Which of the following description about BGP, OSPF, ISIS, RI...; Question 132: Compared to STP, the RSTP protocol defines different port st...; Question 133: When a BGP speaker advertises a route learned from an EBGP p...; Question 134: When the ospf cost and bandwidth-reference commands are conf...; Question 135: When two routers establish a logical BGP peer through multip...; Question 136: After the BGP connection is established, in the case where l...; Question 137: Which three types of IP packet transmission methods are avai...; Question 138: Which of the following routing tools that are not only used ...; Question 139: About multicast routing, which are correct? (Multiple choice...; Question 140: The following description of the optional attributes in BGP ...; Question 141: Which of the following routes meet the following ACL conditi...; Question 142: On the device running MSTP obtain the information as shown i...; Question 143: Policy routing requires manual hop-by-hop configuration, to ...; Question 144: Under the VRP platform, the description of the default prior...; Question 145: Which multicast MAC address is used by the Level-2 router as...; Question 146: What are the benefits of OSPF zoning? (Multiple Choice)...; Question 147: Which of the following is incorrect description of BGP neigh...; Question 148: The ABRs in an OSPF stub area do not flood Type 5 LSAs, Type...; Question 149: Thedescription about OSPF features, which is wrong?...; Question 150: Regarding the description of BGP neighbors, the errors are: ...; Question 151: The BGP attributes that are typically used to control how da...; Question 152: Given the configuration of RTA below, which of the following...; Question 153: Which of the following description of BGP features is wrong?...; Question 154: Define the route-policy Set-cost as follows, which of the fo...; Question 155: How to maintain a network segment group membership of IGMPv2...; Question 156: Which BGP attribute will not be advertised to the neighbor w...; Question 157: Which of the following description about the optional attrib...; Question 158: Link Aggregation is a way to bundle a set of physical interf...; Question 159: IS-IS routers with an interface priority of 0 can't particip...; Question 160: The differences between IGMP versions are: (Multiple Choice)...; Question 161: The description of the LSA header information in the AS-Exte...; Question 162: Which of the following description about the Hello message i...; Question 163: Which types of access control lists can be divided into? (Mu...; Question 164: Which of the following command is used to check Type 2 LAS d...; Question 165: RSTP has been improved on the basis of STP and realized fast...; Question 166: By default, the VRRP of the Huawei AR router runs in preempt...; Question 167: Among BGP's commonly used routing policy tools, which of the...; Question 168: Regarding the BGP AS number, which of the following descript...; Question 169: The community attribute of the route set through routing pol...; Question 170: On the VRP platform, when we import OSPF or ISIS routes to R...; Question 171: In a company network environment, there are two switches SWA...; Question 172: In OSPF, the LSDB overload is usually caused by too many AS ...; Question 173: By default, the OSPF port cost is related to the bandwidth o...; Question 174: The hello time of the BGP neighbor PeerA in the Open is 90s,...; Question 175: Which of the following description about the OSPF protocol i...; Question 176: In the MSTP protocol, each MST Instance uses the RSTP algori...; Question 177: The following is part of the configuration information of th...; Question 178: A switch runs MSTP. The relevant configuration information i...; Question 179: What is wrong description of the working mode of PIM below?...; Question 180: Which of the following is true about BGP, OSPF, ISIS and RIP...; Question 181: Which of the following commands can be used to leak level-2 ...; Question 182: Which of the following description of MED is incorrect? (Mul...; Question 183: Which of the following LSA messages carries master-slave rel...; Question 184: Which of the following description about configuration comma...; Question 185: Which descriptions are correct about the Next Hop attribute ...; Question 186: About the description of MUX VLAN, which is wrong?...; Question 187: In different scenarios, RSTP provides different protection f...; Question 188: Which the following description about Network-Summary-LSA is...; Question 189: As shown in the figure, an OSPF multi-process is configured ...; Question 190: In the OSPF routing protocol, under the same conditions, the...; Question 191: The following description about OSPF packet authentication, ...; Question 192: When multiple routing tools are configured for a BGP neighbo...; Question 193: There are 8 fault-free links in an Eth-Trunk, each link can ...; Question 194: Which of the following commands can used to view the Type 2 ...; Question 195: Regarding the multicast ASM model and the SSM model, which o...; Question 196: IGMPv1 stipulates that when there are multiple routers in th...; Question 197: The AS-Path attribute records all the AS numbers that a rout...; Question 198: Which of the following routing protocols support the release...; Question 199: In the MSTP protocol, each MST Instance uses the RSTP algori...; Question 200: Under the VRP platform, which of the following description a...; Question 201: Link Aggregation is a method of binding a group of physical ...; Question 202: Which of the following description about ABR in OSPF is wron...; Question 203: Which of the following multicast protocol can generate a mul...; Question 204: About this section configuration, which of the following des...; Question 205: Which of the following options belong to the OSPF packet typ...; Question 206: Compared with the OSPF protocol, which are the features of I...; Question 207: Which of the following LSA messages carry master-slave relat...; Question 208: The peer command can be used to specify neighbors on the OSP...

Huawei.H12-221-ENU.v2020-06-22.q208

LEAVE A REPLY