[2026] 350-401 Answers 350-401 Free Demo Are Based On The Real Exam [Q208-Q227]

[2026] 350-401 Answers 350-401 Free Demo Are Based On The Real Exam

350-401 [Jun-2026 Newly Released] Exam Questions For You To Pass

NEW QUESTION # 208
Select the prerequisites for configuring LISP from the below options. (Choose two.)

A. One can directly deploy LISP without determining the type.
B. LISP configuration requires the datak9 license.
C. LISP configuration requires the advanced ip services license.
D. Determine the type of LISP deployment you intend to deploy

Answer: B,D

Explanation:
Before you can configure Locator/ID Separation Protocol (LISP), you will need to determine the type of LISP deployment you intend to deploy. The LISP deployment defines the necessary functionality of LISP devices, which, in turn, determines the hardware, software, and additional support from LISP mapping services and proxy services that are required to complete the deployment.
LISP configuration requires the datak9 license.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s- book/irl-overview.html

NEW QUESTION # 209
Which data plane protocol does EIGRP Over the Top use?

A. LISP
B. GRE
C. MPLS
D. IP-in-IP

Answer: A

NEW QUESTION # 210
An engineer runs the sample code, and the terminal returns this output. Which change to the sample code corrects this issue?

A. Call the read() method explicitly on the test_json string
B. Use a single set of double quotes and condense test_json to a single line
C. Enclose null in the test_json string in double quotes
D. Change the JSON method from load() to loads().

Answer: D

NEW QUESTION # 211
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.

Answer:

Explanation:

Explanation

EIGRP maintains alternative loop-free backup via the feasible successors. To qualify as a feasible successor, a router must have an Advertised Distance (AD) less than the Feasible distance (FD) of the current successor route.
Advertised distance (AD): the cost from the neighbor to the destination. Feasible distance (FD): The sum of the AD plus the cost between the local router and the next-hop router

NEW QUESTION # 212
Refer to the exhibit.

R1 is able to ping the R3 fa0/1 Interface. Why do the extended pings fail?

A. The maximum packet size accepted by the command is 147G bytes
B. The DF bit has been set
C. R2 and R3 do not have an OSPF adjacency
D. R3 is missing a return route to 10.99.69.0/30

Answer: D

Explanation:
In a network, when a device can ping another device but extended pings fail, it often indicates a routing issue.
In this case, R1 can ping R3's fa0/1 interface, which means there is connectivity between the two routers.
However, the extended pings fail because R3 does not have a return route to the network 10.99.69.0/30.
Without this return route, R3 cannot send the echo replies back to R1, resulting in the failure of the extended pings.

NEW QUESTION # 213
A script contains the statement white loop != 999 ' Which value terminates the loop?

A. A value equal to 999.
B. A value not equal to 999.
C. A value less than or equal to 999.
D. A value greater than or equal to 999.

Answer: A

NEW QUESTION # 214
Drag and drop the characteristics from the left onto the deployment models on the right.

Answer:

Explanation:

Explanation:
A picture containing graphical user interface Description automatically generated

NEW QUESTION # 215
Which RF value represents the decline of the RF signal amplitude over a given distance?

A. received signal strength indicator
B. effective isotropic racketed power
C. signal-to-noise ration
D. free space path loss

Answer: D

Explanation:
The RF value representing the decline of the RF signal amplitude over a given distance is known as free space path loss (FSPL). FSPL quantifies the loss of signal strength that occurs when an electromagnetic wave travels through a clear path (free space) without obstacles that could cause reflection or diffraction. It's a critical factor in designing wireless networks to ensure adequate signal coverage and strength.
References: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) training materials1

NEW QUESTION # 216

Refer to the exhibit What does this Python script do?

A. writes the username for a specific IP address into a light database
B. enters the RAOIUS username for a specific IP address
C. enters the TACACS* username for a specific IP address
D. reads the username for a specific IP address from a light database

Answer: D

Explanation:
The Python script connects to a SQLite database and retrieves the username associated with a specific IP address from the 'monitor_branch' table. It uses the sqlite3 library to establish a connection, execute a SQL query to select the user where the 'loopbackip' matches the given IP, and then fetches the username.

NEW QUESTION # 217

Refer to the exhibit. An engineer must create a script that appends the output of the show process cpu sorted command to a file.

A. action 4.0 cli command "show process cpu sorted | append flash:high-cpu-file"
B. action 4.0 syslog command "show process cpu sorted | append flash:high-cpu-file"
C. action 4.0 publish-event "show process cpu sorted | append flash:high-cpu-file"
D. action 4.0 ens-event "show process cpu sorted | append flash:high-cpu-file"

Answer: A

NEW QUESTION # 218
Refer to the exhibit.

What is achieved by this Python script?

A. It loads JSON data into an HTTP request.
B. It converts JSON data to an HTML document.
C. It reads JSON data into a formatted list.
D. It counts JSON data from a website.

Answer: C

Explanation:
The Python script in the exhibit is using the requests library to make HTTP requests to a specific URL and retrieve JSON data. The json.loads() method is used to parse the JSON data from the HTTP response. The script retrieves version information and count from one endpoint, then iteratively retrieves IP addresses based on the count, appending them to a list named 'bp'. Therefore, it reads JSON data into a formatted list. References: I need to search for specific references as I don't have direct access to Implementing and Operating Cisco Service Provider Network Core Technologies content.

NEW QUESTION # 219
Refer to the exhibit.

Refer to the exhibit. A network engineer must load balance traffic that comes from the NAT Router and is destined to 10.10.110.10, to several FTP servers. Which two commands sets should be applied? (Choose two).
A)

B)

C)

D)

E)

A. Option A
B. Option E
C. Option D
D. Option B
E. Option C

Answer: A,E

NEW QUESTION # 220
Refer to the exhibit.

What does the output confirm about the switch's spanning tree configuration?

A. The spanning-tree operation mode for this switch is IEEE.
B. The spanning-tree operation mode for this switch is PVST+.
C. The spanning-tree operation mode for this switch is PVST
D. The spanning-tree mode stp ieee command was entered on this switch

Answer: B

NEW QUESTION # 221
Drag and drop the threat defense solutions from the left onto their descriptions on the right.

Answer:

Explanation:

NEW QUESTION # 222
Refer to the exhibit. Which antenna emits this radiation pattern?

A. RP-TNC
B. omnidirectional
C. dish
D. Yagi

Answer: B

NEW QUESTION # 223
Drag and Drop Question
Drag and drop the characteristics from the left onto the orchestration tools that they describe on the right.

Answer:

Explanation:

NEW QUESTION # 224
An engineer must configure GigabitEthernet 0/0 for VRRP group 65. The rouler must assume the primary rote when it has the highest priority in the group. Which command set must be applied?