Achieve the 1z0-1033-24 Exam Best Results with Help from Oracle Certified Experts
Provide 1z0-1033-24 Practice Test Engine for Preparation
Oracle 1z0-1033-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 67
What would you do if a partner organization is no longer needed and the access of all users needs to be removed?
- A. Proxy log in as superuser, go to the list of partner organizations, and select the partner organization and delete it.
- B. Open the list of partner organizations and set the value of Maximum Users to "0".
- C. Go to the list of partner organizations, perform a proxy log in as the superuser of the partner organization, go to the list of users, select all active users, and click Inactivate.
- D. Proxy log in as superuser, go to the list of partner organizations, and select Denied in the Access drop- down list.
Answer: C
NEW QUESTION # 68
How can action buttons be hidden in Commerce?
- A. by using profiles and steps in Commerce
- B. by putting the action button bar on a hidden tab in Commerce
- C. by using Configuration hiding rules
- D. by using Commerce hiding rules
Answer: D
NEW QUESTION # 69
Along with Part Number, Quantity, and Price, you also want to send additional recommended item details from Configuration to Commerce by using a Recommended Item rule.
Which two options enable you to achieve this? (Choose two.)
- A. Pass the additional details by storing them in a Price Book.
- B. Use BOM Mapping rules.
- C. Use the Comment field to pass additional details.
- D. This is not feasible. Only Part Number, Quantity, and Price can be passed from Config to Commerce by using Recommended Item rules.
- E. Concatenate the additional details to Part Number.
Answer: B,C
NEW QUESTION # 70
How should an administrator set up a conditional restriction for access to a Product Family?
- A. by hiding the model Punch-In on the home page by using JavaScript
- B. by setting up a restricted profile and user group in Commerce and hiding the add, reconfigure, and delete product options
- C. by providing conditional access criteria in the Restricted Access section of the home page setup
- D. by writing a Constraint rule at the Product Family level
Answer: C
NEW QUESTION # 71
You need to update opportunity revenue lines in CX Sales as part of your Integration with CPQ.
Which integration can you use to cause the opportunity revenue lines to be updated?
- A. OSC-REST Sync Lines
- B. OSC-REST Line Sync Update
- C. OSC-REST Line Sync Complete
- D. OSC-REST Upsert Quote
Answer: B
NEW QUESTION # 72
What is the correct procedure for moving a file from one folder to another in File Manager?
- A. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, click the destination folder, and click the Move button.
- B. Click File Manager on the Admin home page, click the source file folder, click the file you want to move, and drag the file to the destination folder.
- C. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, select the destination folder from the Select Folder drop-down menu, and click the Copy button.
- D. Click File Manager on the Admin home page, click the source file folder, right-click the file you want to move and select Copy from the shortcut menu, click the destination file folder, and right-click in the list of files in that destination folder and select Paste from the shortcut menu.
- E. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, select the destination folder from the Select Folder drop-down menu, and click the Move button.
Answer: B
NEW QUESTION # 73
Identify two ways in which you can display a message to a user while using simple table-based lookups for an attribute. (Choose two.)
- A. setting the message type as Table Column when selecting an attribute to populate
- B. defining an advanced BML (CPQ Cloud Language) function for that attribute
- C. setting the message type as Static Entry when selecting an attribute to populate
- D. defining a static text message for that attribute
Answer: C,D
NEW QUESTION # 74
Which statement is true about creating individual user groups for each partner organization, when creating partner organizations?
- A. Partner organizations have only users, but no user groups.
- B. A host company FullAccess user create groups for partner organizations; however, the superuser of a partner organization can only assign users to existing groups.
- C. The groups of partner organizations are created by using the Bulk Upload utility or SOAP API calls.
- D. The groups of a partner organization are maintained by FullAccess users belonging to the partner organization.
- E. Partner organizations use the same user groups defined for the host company.
Answer: B
NEW QUESTION # 75
Which attribute type cannot be displayed on the line item grid?
- A. HTML attributes
- B. Currency attributes
- C. Single-select menu attributes
- D. Text attributes
Answer: A
NEW QUESTION # 76
There are two single-select attributes in an array set. The first single-select attribute shows a list of countries and the second attribute shows a list of states.
Which is the most efficient way to show relevant states based on chosen country?
- A. Load all country and state combinations in a data table and write a Constraint rule to lookup the data table.
- B. Create a Constraint rule for each country in the drop-down list by using Simple Conditions and select valid states for the Action attribute of the rule. In this case, number of rules will be equal to the number of countries in the list.
- C. Create Hiding rules for each country with Simple Conditions, and then select valid states for the Action attribute. In this case, the number of Hiding rules will be equal to the number of countries.
- D. Use the Hiding rule, which is the only possible option, because arrays do not do not support Constraint rules.
Answer: C
NEW QUESTION # 77
Identify two reasons why some or all transaction in a particular step are hidden for a user in Transaction Manager.
- A. The participant profile that is valid for this user has the Document Views tab, the Document Views panel, and the "Entire Document" = "hide" setting.
- B. The step has an auto-forwarding rule, which did not return the user or one of his groups and all participant profiles do not have other permission methods selected.
- C. There is no valid participant profile for this user with hidden transactions.
- D. All participant profiles of this step have group access defined and the "Performer Step" set, and the user did not perform an action on the hidden transactions in other steps.
- E. A hiding rule was defined in commerce rules.
- F. The user has the RestrictedAccess user type.
Answer: D,F
NEW QUESTION # 78
After saving content to the Content library, you check the Content library Tree and find that the new content is missing. What would be your immediate action?
- A. Deploy Config and Commerce.
- B. Deploy Commerce.
- C. Close and re-open the Content Library Tree.
- D. Close, refresh dynamic sources, and re-open the Dynamic Data window.
Answer: C
NEW QUESTION # 79
You want to control the information that can be viewed on the transaction page.
What must you create to accomplish this?
- A. Participant Profiles
- B. Constraint Rules
- C. Transition Rules
- D. Library Functions
- E. Internal User Definitions
Answer: A
NEW QUESTION # 80
Which two scenarios are valid for looping by using XSL Snippets? (Choose two.)
- A. You want to display a table of single-select, quote-level Commerce attributes.
- B. The data in the line item grid must be displayed as a table.
- C. The data needs to be manipulated before being used in loop conditions.
- D. The grid selector cannot handle the conditions that you need to implement.
Answer: C,D
NEW QUESTION # 81
Given the following code:
What will be returned?
- A. (key) = (/lang/book/library)(value) = (en)(value) = (fr)
- B. (key) = (/library/book/@lang)(value) = (Spring in Action)(value) = (J2EE Blueprint)
- C. (key) = (/library/book/@lang)(value) = (English)(value) = (French)
- D. (key) = (/library/book/@lang)(value) = (en)(value) = (fr)
Answer: A
NEW QUESTION # 82
A new user group has been created in the development environment. What should you do to migrate this new user group to the production environment?
- A. Migrate the new user group to the production environment.
- B. Migrate Commerce to the production environment.
- C. Manually create the new user group in the production environment.
- D. Migrate the new users to the production environment.
Answer: A
NEW QUESTION # 83
What two options do you have when searching for multiple parts on the Parts Administration page? (Choose two.)
- A. You can leave the field empty, which will return all parts.
- B. Use "*" and/or "?" as wildcards.
- C. Type the start string of a part number. The search will return all parts starting with this text.
- D. Use regular expressions (RegEx) to describe a search pattern.
- E. Use "_" and/or "%" as wildcards.
Answer: B,C
NEW QUESTION # 84
......
Detailed New 1z0-1033-24 Exam Questions for Concept Clearance: https://www.freecram.com/Oracle-certification/1z0-1033-24-exam-dumps.html
1z0-1033-24 Exam Preparation Material with New 1z0-1033-24 Dumps Questions.: https://drive.google.com/open?id=1zJf66nAaBCHxid9sR-DfJFcnbtPc_dp_