350-701 Free Update With 100% Exam Passing Guarantee [2026]
[May-2026] Verified Cisco Exam Dumps with 350-701 Exam Study Guide
Cisco 350-701 exam is intended for IT security professionals who want to enhance their knowledge in core security technologies. Candidates should have a good understanding of security technologies and concepts, and experience in implementing and operating Cisco security solutions. 350-701 exam covers a broad range of topics, including network security, cloud security, content security, endpoint protection and detection, secure network access, visibility, and enforcement.
Cisco 350-701 (Implementing and Operating Cisco Security Core Technologies) certification exam is designed for network security engineers who want to enhance their knowledge and validate their skills in implementing and operating core Cisco security technologies. 350-701 exam covers a wide range of security topics such as network security, cloud security, endpoint protection, and secure network access. 350-701 exam enables candidates to demonstrate their expertise in implementing and managing security solutions that protect their organizations against cyber threats.
NEW QUESTION # 378
Drag and drop the capabilities from the left onto the correct technologies on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 379
Which Cisco solution does Cisco Umbrella integrate with to determine if a URL is malicious?
- A. AnyConnect
- B. DynDNS
- C. AMP
- D. Talos
Answer: D
Explanation:
ExplanationExplanationWhen Umbrella receives a DNS request, it uses intelligence to determine if the request is safe, malicious or risky - meaning the domain contains both malicious and legitimate content. Safe and malicious requests are routed as usual or blocked, respectively. Risky requests are routed to our cloud-based proxy for deeper inspection. The Umbrella proxy uses Cisco Talos web reputation and other third-party feeds to determine if a URL is malicious.
NEW QUESTION # 380
A switch with Dynamic ARP Inspection enabled has received a spoofed ARP response on a trusted interface.
How does the switch behave in this situation?
- A. It drops the packet without validation.
- B. It drops the packet after validation by using the IP & MAC Binding Table.
- C. It forwards the packet without validation.
- D. It forwards the packet after validation by using the MAC Binding Table.
Answer: C
NEW QUESTION # 381
Refer to the exhibit.
Which type of authentication is in use?
- A. POP3 authentication
- B. LDAP authentication for Microsoft Outlook
- C. external user and relay mail authentication
- D. SMTP relay server authentication
Answer: C
NEW QUESTION # 382
What are the two types of managed Intercloud Fabric deployment models? (Choose two.)
- A. Hybrid managed
- B. Service Provider managed
- C. Enterprise managed
- D. User managed
- E. Public managed
Answer: B,C
Explanation:
Explanation:
Many enterprises prefer to deploy development workloads in the public cloud, primarily for convenience and faster deployment. This approach can cause concern for IT administrators, who must control the flow of IT traffic and spending and help ensure the security of data and intellectual property. Without the proper controls, data and intellectual property can escape this oversight. The Cisco Intercloud Fabric solution helps control this shadow IT, discovering resources deployed in the public cloud outside IT control and placing these resources under Cisco Intercloud Fabric control.
Cisco Intercloud Fabric addresses the cloud deployment requirements appropriate for two hybrid cloud deployment models: Enterprise Managed (an enterprise manages its own cloud environments) and Service Provider Managed (the service provider administers and controls all cloud resources).
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Hybrid_Cloud/Intercloud/Intercloud_Fabric
/Intercloud_Fabric_2.html
NEW QUESTION # 383
Refer to the exhibit.
What does the number 15 represent in this configuration?
- A. access list that identifies the SNMP devices that can access the router
- B. privilege level for an authorized user to this router
- C. number of possible failed attempts until the SNMPv3 user is locked out
- D. interval in seconds between SNMPv3 authentication attempts
Answer: A
Explanation:
The syntax of this command is shown below:
snmp-server group [group-name {v1 | v2c | v3 [auth | noauth | priv]}] [read read-view] [write write-view]
[notify notify-view] [access access-list]
The command above restricts which IP source addresses are allowed to access SNMP functions on the router.
You could restrict SNMP access by simply applying an interface ACL to block incoming SNMP packets that don't come from trusted servers. However, this would not be as effective as using the global SNMP commands shown in this recipe. Because you can apply this method once for the whole router, it is much simpler than applying ACLs to block SNMP on all interfaces separately. Also, using interface ACLs would block not only SNMP packets intended for this router, but also may stop SNMP packets that just happened to be passing through on their way to some other destination device.
NEW QUESTION # 384
What is the purpose of the certificate signing request when adding a new certificate for a server?
- A. It provides the certificate client information so the server can authenticate against it when installing
- B. It is the password for the certificate that is needed to install it with.
- C. It is the certificate that will be loaded onto the server
- D. It provides the server information so a certificate can be created and signed
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_cert.html
NEW QUESTION # 385
An engineer needs to configure an access control policy rule to always send traffic for inspection without using the default action. Which action should be configured for this rule?
- A. allow
- B. block
- C. trust
- D. monitor
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623
/access_control_using_intrusion_and_file_policies.html#:~:text=File%20Policies-,Access%20Control%
20Traffic%20Handling%20with%20Intrusion%20and%20File%20Policies,-The%20following%20diagram the first three access control rules in the policy-Monitor, Trust, and Block-cannot inspect matching traffic.
Monitor rules track and log but do not inspect network traffic, so the system continues to match traffic against additional rules to determine whether to permit or deny it
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623
/access_control_rules.html#:~:text=Rule%20Blocking%20Actions-,Access%20Control%20Rule%20Allow%
20Action,network%20discovery%20policy%3B%20additionally%2C%20application%20discovery%20is%
20limited%20for%20encrypted%20sessions.,-Related%20Concepts
NEW QUESTION # 386
Drag and drop the Firepower Next Generation Intrusion Prevention System detectors from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 387
Which type of DNS abuse exchanges data between two computers even when there is no direct connection?
- A. data exfiltration
- B. network footprinting
- C. command-and-control communication
- D. malware installation
Answer: D
NEW QUESTION # 388
An administrator configures new authorization policies within Cisco ISE and has difficulty profiling the devices. Attributes for the new Cisco IP phones that are profiled based on the RADIUS authentication are seen however the attributes for CDP or DHCP are not. What should the administrator do to address this issue?
- A. Configure a service template within the switch to standardize the port configurations so that the correct information is sent to Cisco ISE
- B. Configure the device sensor feature within the switch to send the appropriate protocol information
- C. Configure the authentication port-control auto feature within Cisco ISE to identify the devices that are trying to connect
- D. Configure the ip dhcp snooping trust command on the DHCP interfaces to get the information to Cisco ISE
Answer: B
Explanation:
Device sensor is a feature of access devices. It allows to collect information about connected endpoints. Mostly, information collected by Device Sensor can come from the following protocols: + Cisco Discovery Protocol (CDP) + Link Layer Discovery Protocol (LLDP) + Dynamic Host Configuration Protocol (DHCP) Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200292-ConfigureDevice-Sensor-for-ISE-Profilin.html information collected by Device Sensor can come from the following protocols:
+ Cisco Discovery Protocol (CDP)
+ Link Layer Discovery Protocol (LLDP)
+ Dynamic Host Configuration Protocol (DHCP)
Device sensor is a feature of access devices. It allows to collect information about connected endpoints. Mostly, information collected by Device Sensor can come from the following protocols: + Cisco Discovery Protocol (CDP) + Link Layer Discovery Protocol (LLDP) + Dynamic Host Configuration Protocol (DHCP) Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200292-ConfigureDevice-Sensor-for-ISE-Profilin.html
NEW QUESTION # 389
Refer to the exhibit.
An engineer is implementing a certificate based VPN. What is the result of the existing configuration?
- A. The OU of the IKEv2 peer certificate is used as the identity when matching an IKEv2 authorization policy.
- B. Only an IKEv2 peer that has an OU certificate attribute set to MANGLER establishes an IKEv2 SA successfully
- C. The OU of the IKEv2 peer certificate is set to MANGLER
- D. The OU of the IKEv2 peer certificate is encrypted when the OU is set to MANGLER
Answer: A
NEW QUESTION # 390
What are two benefits of Flexible NetFlow records? (Choose two)
- A. They provide attack prevention by dropping the traffic
- B. They converge multiple accounting technologies into one accounting mechanism
- C. They provide monitoring of a wider range of IP packet information from Layer 2 to 4
- D. They provide accounting and billing enhancements
- E. They allow the user to configure flow information to perform customized traffic identification
Answer: D,E
Explanation:
Explanation Explanation NetFlow is typically used for several key customer applications, including the following: ... Billing and accounting. NetFlow data provides fine-grained metering (for instance, flow data includes details such as IP addresses, packet and byte counts, time stamps, type of service (ToS), and application ports) for highly flexible and detailed resource utilization accounting. Service providers may use the information for billing based on time of day, bandwidth usage, application usage, quality of service, and so on. Enterprise customers may use the information for departmental charge back or cost allocation for resource utilization. Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-mt/fnf-15-mt-book/fnffnetflow.html If the predefined Flexible NetFlow records are not suitable for your traffic requirements, you can create a userdefined (custom) record using the Flexible NetFlow collect and match commands. Before you can create a customized record, you must decide the criteria that you are going to use for the key and nonkey fields. Reference: https://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/ cust_fnflow_rec_mon_external_docbase_0900e4b18055d0d2_4container_external_docbase_0900e4b181b413 d9.html#wp1057997 Note: Traditional NetFlow allows us to monitor from Layer 2 to 4 but Flexible NetFlow goes beyond these layers.
Explanation
NetFlow is typically used for several key customer applications, including the following:
...
Billing and accounting. NetFlow data provides fine-grained metering (for instance, flow data includes details such as IP addresses, packet and byte counts, time stamps, type of service (ToS), and application ports) for highly flexible and detailed resource utilization accounting. Service providers may use the information for billing based on time of day, bandwidth usage, application usage, quality of service, and so on. Enterprise customers may use the information for departmental charge back or cost allocation for resource utilization.
Reference:
If the predefined Flexible NetFlow records are not suitable for your traffic requirements, you can create a userdefined (custom) record using the Flexible NetFlow collect and match commands. Before you can create a customized record, you must decide the criteria that you are going to use for the key and nonkey fields.
cust_fnflow_rec_mon_external_docbase_0900e4b18055d0d2_4container_external_docbase_0900e4b181b413 d9.html#wp1057997 Note: Traditional NetFlow allows us to monitor from Layer 2 to 4 but Flexible NetFlow goes beyond these Explanation Explanation NetFlow is typically used for several key customer applications, including the following: ... Billing and accounting. NetFlow data provides fine-grained metering (for instance, flow data includes details such as IP addresses, packet and byte counts, time stamps, type of service (ToS), and application ports) for highly flexible and detailed resource utilization accounting. Service providers may use the information for billing based on time of day, bandwidth usage, application usage, quality of service, and so on. Enterprise customers may use the information for departmental charge back or cost allocation for resource utilization. Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-mt/fnf-15-mt-book/fnffnetflow.html If the predefined Flexible NetFlow records are not suitable for your traffic requirements, you can create a userdefined (custom) record using the Flexible NetFlow collect and match commands. Before you can create a customized record, you must decide the criteria that you are going to use for the key and nonkey fields. Reference: https://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/ cust_fnflow_rec_mon_external_docbase_0900e4b18055d0d2_4container_external_docbase_0900e4b181b413 d9.html#wp1057997 Note: Traditional NetFlow allows us to monitor from Layer 2 to 4 but Flexible NetFlow goes beyond these layers.
NEW QUESTION # 391
What is the difference between Cross-site Scripting and SQL Injection, attacks?
- A. Cross-site Scripting is an attack where code is injected into a database, whereas SQL Injection is an attack where code is injected into a browser.
- B. Cross-site Scripting is a brute force attack targeting remote sites, whereas SQL Injection is a social engineering attack.
- C. Cross-site Scripting is an attack where code is executed from the server side, whereas SQL Injection is an attack where code is executed from the client side.
- D. Cross-site Scripting is when executives in a corporation are attacked, whereas SQL Injection is when a database is manipulated.
Answer: A
NEW QUESTION # 392
An engineer is implementing NTP authentication within their network and has configured both the client and server devices with the command ntp authentication-key 1 md5 Cisc392368270. The server at 1.1.1.1 is attempting to authenticate to the client at 1.1.1.2, however it is unable to do so. Which command is required to enable the client to accept the server's authentication key?
- A. ntp peer 1.1.1.2 key 1
- B. ntp server 1.1.1.2 key 1
- C. ntp server 1.1.1.1 key 1
- D. ntp peer 1.1.1.1 key 1
Answer: C
Explanation:
Explanation
To configure an NTP enabled router to require authentication when other devices connect to it, use the following commands:
NTP_Server(config)#ntp authentication-key 2 md5 securitytut
NTP_Server(config)#ntp authenticate
NTP_Server(config)#ntp trusted-key 2
Then you must configure the same authentication-key on the client router:
NTP_Client(config)#ntp authentication-key 2 md5 securitytut
NTP_Client(config)#ntp authenticate
NTP_Client(config)#ntp trusted-key 2
NTP_Client(config)#ntp server 10.10.10.1 key 2
Note: To configure a Cisco device as a NTP client, use the command ntp server <IP address>. For example:
Router(config)#ntp server 10.10.10.1. This command will instruct the router to query 10.10.10.1 for the time.
NEW QUESTION # 393
Drag and drop the steps from the left into the correct order on the right to enable AppDynamics to monitor an EC2 instance in Amazon Web Services.
Answer:
Explanation:
NEW QUESTION # 394
What are two functionalities of northbound and southbound APIs within Cisco SDN architecture? (Choose two.)
- A. Northbound APIs utilize RESTful API methods such as GET, POST, and DELETE.
- B. Southbound interfaces utilize device configurations such as VLANs and IP addresses.
- C. Southbound APIs utilize CLI, SNMP, and RESTCONF.
- D. Northbound interfaces utilize OpenFlow and OpFlex to integrate with network devices.
- E. Southbound APIs are used to define how SDN controllers integrate with applications.
Answer: A,C
Explanation:
Northbound and southbound APIs are two types of interfaces that enable communication between different layers of the SDN architecture. Northbound APIs relay information between the controller and the applications or policy engines, while southbound APIs relay information between the controller and the network devices.
Northbound APIs allow applications to request network services or resources from the controller, such as bandwidth, latency, security, or routing. The controller then translates these requests into network configurations and applies them to the network devices via the southbound APIs. Northbound APIs typically use RESTful API methods such as GET, POST, and DELETE to communicate with the controller.
Southbound APIs allow the controller to program the network devices to perform forwarding and other functions. The controller can use different protocols or standards to communicate with the network devices, depending on their capabilities and vendor-specific features. Some common examples of southbound APIs are CLI, SNMP, RESTCONF, NETCONF, OpenFlow, and OpFlex.
References:
* Software-Defined Networking (SDN) Definition - Cisco
* Software-Defined Networking Security and Network ... - Cisco Press
* Cisco SDN - Software Defined Networking Explained - Study-CCNA
* SDN Network - Cisco Community
NEW QUESTION # 395
......
Cisco 350-701 certification exam is a highly sought-after certification for IT professionals in the field of cybersecurity. 350-701 exam is designed to test the skills and knowledge of candidates in implementing and operating Cisco Security Core Technologies. Implementing and Operating Cisco Security Core Technologies certification exam is a comprehensive test that covers all the essential topics required to be proficient in cybersecurity and network security.
Authentic Best resources for 350-701 Online Practice Exam: https://www.freecram.com/Cisco-certification/350-701-exam-dumps.html
350-701 Test Engine Practice Exam: https://drive.google.com/open?id=1kBSXisB_M3gKnpl0oU8hQ9-6jABvHErH