[2023] New HPE6-A72 exam dumps Use Updated HP Exam
Verified HPE6-A72 Dumps Q&As - HPE6-A72 Test Engine with Correct Answers
The HP HPE6-A72 exam consists of 60 multiple-choice questions and lasts for 1 hour and 30 minutes. The questions are designed to test the candidate's understanding of switch architecture, VLANs, spanning tree protocol, link aggregation, and other network switching concepts. HPE6-A72 exam is administered by Pearson VUE and can be taken at any of their testing centers globally.
NEW QUESTION # 30
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?
- A. Aruba 8408
- B. Aruba 6410
- C. Aruba 8400
- D. Aruba 5412r
Answer: C
NEW QUESTION # 31
Review the exhibit.
As the frame traverses from **PC-1** to **Server-1**, the VLAN tag will be removed.
Click on the interface (circled in green) where the VLAN tag will be removed.
Answer:
Explanation:
NEW QUESTION # 32
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION # 33
What are two features of the three-tier designs? (Choose two.)
- A. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- B. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
- C. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- D. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
- E. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
Answer: B,C
NEW QUESTION # 34
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy sftp://[email protected]/GL.10.04.0003.swi secondary
- B. backup secondary sftp://[email protected]/GL.10.04.0003.swi
- C. copy secondary tftp://[email protected]/GL.10.04.0003.swi
- D. copy secondary sftp://[email protected]/GL.10.04.0003.swi
Answer: D
NEW QUESTION # 35
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 36
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2
Answer: B
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 37
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: B
NEW QUESTION # 38
Which option correctly describes a WAN network?
- A. the connection between two separate buildings in the same campus
- B. a network of devices over long distances but limited to within a single ISP
- C. compute resources that are networked locally over wireless
- D. a group of computer resources that communicates between geographically separate location
Answer: D
NEW QUESTION # 39
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION # 40
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. "password"
- B. "forgetme!"
- C. No password is set for this account.
- D. The same login password that has lost originally.
Answer: B
Explanation:
Explanation/Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/ Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm
NEW QUESTION # 41
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 42
Refer to the exhibit.
Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?
- A. Root
- B. Backup
- C. Alternate
- D. Designated
Answer: A
NEW QUESTION # 43
Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?
- A. switch(config-if)# no lldp transmit
- B. switch(config-if)# no lldp interface (port) transmit
- C. switch(config)# no lldp
- D. switch(config-if)# no lldp receive
Answer: A
NEW QUESTION # 44
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command less
- C. The command page
- D. The command more
Answer: C
NEW QUESTION # 45
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION # 46
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# ip vpn-instance Green
- B. Core(config-if-vlan)# routing-context Green vrf
- C. Core(config-if-vlan)# ip vrf forwarding Green
- D. Core(config-if-vlan)# vrf attach Green
Answer: D
NEW QUESTION # 47
......
Pass Your HPE6-A72 Dumps as PDF Updated on 2023 With 90 Questions: https://www.freecram.com/HP-certification/HPE6-A72-exam-dumps.html
HP HPE6-A72 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=15hIH7S8rfmK2o_W5NhiZWbUr2Wim6uk3