[2025] API-936 All-in-One Exam Guide Practice To your API-936 Exam!
Preparations of API-936 Exam 2025 Individual Certification Programs Unlimited 100 Questions
NEW QUESTION # 32
A metallic anchor used to attach ceramic anchors to the casing or shall of a processing unit is
- A. None of the above
- B. C-clip
- C. U - anchor
- D. Claw anchor
Answer: B
NEW QUESTION # 33
Castable, gunning mixes, ramming mixes, plastics, and mortars are
- A. Unshaped refractory
- B. Shaped refractory
- C. Refractory fiber
- D. All of the above
Answer: A
NEW QUESTION # 34
The vessel downstream of the reactor used to separate different product fractions is called
- A. None of the above
- B. Transfer line of FCCU
- C. Standpipe of FCCU
- D. Fractionator of FCCU
Answer: D
NEW QUESTION # 35
The length of metal fiber is
- A. None of the above
- B. 30 or 40mm
- C. 10 or 15mm
- D. 19mm or 25mm
Answer: D
NEW QUESTION # 36
The standard size of a fabricated test panel for pneumatic gunning qualification is
- A. (600 mm x 600 mm) 24 " x 24"
- B. None of the above
- C. (700 mm x 700 mm)
- D. (500 mm x 500 mm)
Answer: A
NEW QUESTION # 37
1 solid black is the color of the stripe for the alloy material
- A. None of the above
- B. 0
- C. 1
- D. 304L
Answer: C
NEW QUESTION # 38
Additives used to facilitate moisture removal of refractory linings during dry out are called
- A. None of the above
- B. Mineral fiber
- C. Metal fiber
- D. Organic fiber
Answer: D
NEW QUESTION # 39
The terminology for testing refractory that was sampled during installation in order to confirm that they meet specified physical property standards is called
- A. None of the above
- B. Physical property test
- C. As - installed testing
- D. Both of the above
Answer: C
NEW QUESTION # 40
Commercially on calcined basis bauxite must contain at least
- A. None of the above
- B. 65% fused silica
- C. 65% alumina
- D. 60% alumina
Answer: C
NEW QUESTION # 41
In ceramics, the property of resistance to melting, softening, or deformation at high temperature is called.
- A. None of the above
- B. Cold crushing strength
- C. Pyrometric cone equivalent
- D. Refractoriness
Answer: D
NEW QUESTION # 42
A high alumina mineral usually consists of rounded concretionary grains embedded in clay-like mass and is believed to consist essentially of alumina trihydrate (Al2O3 H2O) and alumina hydrate (Al2O3 H2O) in varying proportions is called
- A. kyanite
- B. fused alumina
- C. alusite
- D. bauxite
Answer: D
NEW QUESTION # 43
Enclosure inside the top head of a reactor or regenerator vessel which supports the cyclones and in which gases exiting the cyclone outlets are collected is called
- A. None of the above
- B. Riser of FCCU
- C. Plenum of FCCU
- D. Cyclone of FCCU
Answer: C
NEW QUESTION # 44
A metallic anchor, usually V-stud which has a foot-shaped configuration at the base to aid weld attachment to the shell is called.
- A. None of the above
- B. Footed anchor
- C. Stud weld
- D. V-anchor
Answer: B
NEW QUESTION # 45
Gunning test panels are constructed with removable backs as required for
- A. None of the above
- B. laboratory test
- C. visual inspection of the castable
- D. physical property test
Answer: C
NEW QUESTION # 46
The loss of fragmented refractories from the face of the refractory structure, through cracking and rupturing which results in the exposure of the original inner portion of the refractory lining is called
- A. Erosion
- B. Sheeting
- C. Bypassing
- D. Spalling
Answer: D
NEW QUESTION # 47
Refractory cast into a mock-up may be stripped and visually inspected after a minimum curing of
- A. 24 hrs
- B. 8 hrs
- C. 12 hrs
- D. 16 hrs
Answer: C
NEW QUESTION # 48
The surface of a refractory section exposed to the source of heat
- A. None of the above
- B. cold face
- C. hot face
- D. smooth face
Answer: C
NEW QUESTION # 49
As installed testing is the terminology for testing refractory that was sampled during installation in order to confirm that they meet specified.
- A. None of the above
- B. Both as above
- C. Physical property standards
- D. Chemical property standards
Answer: C
NEW QUESTION # 50
......
API-936 is a globally recognized certification exam for refractory personnel. It is designed to provide a comprehensive understanding of refractory materials, installation, testing, and inspection. Refractory Personnel certification is particularly important to those in the oil and gas industry, where refractory materials are used extensively in high-temperature environments. The API-936 certification is a must-have for refractory inspectors, engineers, and supervisors who are responsible for ensuring the safety and efficiency of refractory installations.
API-936 exam covers a wide range of topics related to refractory materials, including their properties, installation, inspection, and repair. API-936 exam also covers safety procedures and regulations related to refractory materials. Passing the API-936 exam demonstrates an individual's understanding and ability to work with refractory materials safely and effectively.
Focus on API-936 All-in-One Exam Guide For Quick Preparation: https://www.freecram.com/API-certification/API-936-exam-dumps.html
Practice To API-936 - FreeCram Remarkable Practice On your Refractory Personnel Exam: https://drive.google.com/open?id=1QdgM8OoxU0EhF6VXfDpdpD0FXMKmjuPZ