Free Jan-2026 UPDATED Nutanix NCP-CN-6.10 Certification Exam Dumps is Online
Nutanix Exam 2026 NCP-CN-6.10 Dumps Updated Questions
NEW QUESTION # 12
What is a valid troubleshooting step if the bootstrap cluster creation fails due to unreachable control plane components?
- A. Enable image pull secrets
- B. Verify network connectivity and firewall rules
- C. Restart the Prism Central VM
- D. Reduce the cluster node size
Answer: B
NEW QUESTION # 13
A Platform Engineer works for a service provider and needs to establish access and authentication for multiple clients into an NKP cluster. Each client has their own LDAP source that should be used for authentication into the cluster.
How would this be accomplished?
- A. An NKP project would be created for each client and an LDAP connector would be created for each NKP project. Users would provide the project name their company was assigned as part of their login.
- B. The LDAP connector configuration would be modified to include an array for each client LDAP source to authenticate with. Users would provide the client name defined in the array as part of their login.
- C. A common LDAP source needs to be established and client specific groups and users need to be configured within this common LDAP provider. Then an LDAP connector would be created for this LDAP provider.
- D. An NKP workspace needs to be created for each client and an LDAP connector would be created for each NKP workspace.
Answer: D
NEW QUESTION # 14
A Platform Engineer is deploying NKP into a highly secure vSphere environment. The NKP cluster will be air-gapped, and must also be FIPS compliant. The OS platform to be used for NKP cluster nodes is RHEL.
What must the engineer do to properly prep an OS image and have it be deployed as a FIPS compliant NKP cluster node?
- A. Verify the OS itself has been placed in fips mode.When performing the NKP image build operation, be sure to include the offline fips and fips overrides.When performing the NKP cluster deploy operation, be sure to include the FIPS version references for kubernetes, kubectl and etcd.
- B. Verify the OS itself has been placed in fips mode.When performing the NKP image build operation, be sure to include the offline fips and fips overrides.When performing the NKP cluster deploy operation, be sure to include the FIPS version references for kubernetes and etcd.
- C. Verify the OS itself has been placed in fips mode.When performing the NKP image build operation, be sure to include the offline fips override.When performing the NKP cluster deploy operation, be sure to include the FIPS version references for kubernetes and etcd.
- D. Verify the OS itself has been placed in fips mode.When performing the NKP cluster deploy operation, be sure to include the FIPS version references for kubernetes, kubectl and etcd.
Answer: B
NEW QUESTION # 15
A Platform Engineer is attaching existing Kubernetes clusters to NKP, but a particular Kubernetes Amazon EKS cluster is getting errors with application deployments. These errors are related to persistent volumes. What could be the issue, and what can the engineer do?
- A. The storage appliance is having issues. The storage engineer should be contacted to take a look.
- B. There is no compatible storage to be attached to the EKS cluster. Ask for compatible storage.
- C. There is no default StorageClass. Storage classes should be reviewed, and only one should be set as default.
- D. There could be a misconfiguration in the ConfigMap. It should be adjusted to NKP requirements.
Answer: C
NEW QUESTION # 16
A development team decided to employ an efficient monitoring system with Grafana-logging, which was successfully implemented as can be seen in the following output:
AppDeployment "kommander-default-workspace/grafana-logging" created in namespace
"kommander-default-workspace".
Which command did the team execute to complete this task?
- A. export WORKSPACE_NAMESPACE=kommander-default-workspaceappdeploymentnkp create package-bundle grafana-logging
- B. kubectl get appdeployment -n kommander-default-workspace
- C. nkp create appdeployment grafana-logging --app grafana-logging-6.57.4 --workspace default- workspace
- D. kubectl get helmreleases grafana-logging -n kommander-default-workspace -w
Answer: C
NEW QUESTION # 17
A Platform Engineer is attaching existing Kubernetes clusters to NKP, but some of them have network restrictions, so there is a need to use Secure Tunnel. The Platform Engineer needs to ask the Security Engineer to modify the firewall rules.
What must the firewall rules allow on the attached cluster network?
- A. HTTPS (TCP/443)
- B. Secured LDAP (TCP/636)
- C. NTP Service (UDP/123)
- D. iSCSI (TCP/860 & 3260)
Answer: A
NEW QUESTION # 18
What is the primary purpose of integrating an identity provider (IdP) into Kommander?
- A. To authenticate users and assign role-based access
- B. To synchronize etcd backups
- C. To create default namespaces automatically
- D. To manage pod security policies
Answer: A
NEW QUESTION # 19
A company is required by NIST to follow FIPS guidelines for compliance.
What is the first step for enabling FIPS in NKP?
- A. Run the command export FIPS_ENABLED=true
- B. Click Enable in the NKP Kommander Web UI, Global Workspace -> Settings -> FIPS menu.
- C. Run the command nkp cluster create <provisioner> <options> --fips
- D. Follow the OS vendor's instructions to ensure that the OS or OS images are prepared for operating in FIPS mode.
Answer: D
NEW QUESTION # 20
There is a private registry for the NKP deployment and the company has an NKP Ultimate license. A Platform Engineer is using the Podman tool and is already logged in. Now, the engineer needs to send the private registry with the NKP Catalog Applications.
What command should the engineer use?
- A. nkp push bundle --bundle ./container-images/nkp/catalog-applications-image-bundle-v2.12.0.tar - - to-registry=${REGISTRY_URL} --to-registry-username=${REGISTRY_USERNAME} --to-registry- password=${REGISTRY_PASSWORD}
- B. podman load -i ./container-images/nkp/catalog-applications-image-bundle-v2.12.0.tar
- C. nkp apply bundle -f ./container-images/nkp/catalog-applications-image-bundle-v2.12.0.tar --to- registry=${REGISTRY_URL} --to-registry-username=${REGISTRY_USERNAME} --to-registry- password=${REGISTRY_PASSWORD}
- D. docker load -i ./container-images/nkp/catalog-applications-image-bundle-v2.12.0.tar
Answer: A
NEW QUESTION # 21
A developer asked a Platform Engineer to review a deployment in the cluster called iot-1 in the workspace iot-plant-3, but the engineer does not have the kubeconfig file. Which command is valid for generating the kubeconfig file to review the Kubernetes cluster?
- A. kubectl get kubeconfig --cluster-name=iot-1 -w iot-plant-3 > iot-1.conf
- B. nkp get configmaps -n iot-plant-3 -c iot-1 > iot-1.conf
- C. kubectl get secret iot-1 -n kommander > iot-1.conf
- D. nkp get kubeconfig -c iot-1 -w iot-plant-3 > iot-1.conf
Answer: D
NEW QUESTION # 22
In a telecom company, two teams were working on the development of two different applications:
ApplicationA
ApplicationB
ApplicationA's development team was excited about the release of their new functionality.
However, upon deploying their application, they noticed that performance was slow. After investigating, they discovered that the ApplicationB team was consuming the majority of the cluster's resources, affecting all other teams. How can this problem be mitigated?
- A. Implementing Quotas and Limit Ranges
- B. Configuring RBAC
- C. Setting up Network Policies
- D. Implementing Continuous Deployment (CD)
Answer: A
NEW QUESTION # 23
A dev team needed to optimize their logging system to be more robust, because the CPU and memory limits were insufficient, which caused delays in log collection and processing during times of high demand.
After a deep performance analysis, they decided to increase the CPU limits from 1 to 4 and the memory from 1000Mi to 4Gi.
Which ConfigMap should the development team run with custom resource requests and limit values for fluentd?
- A. bashCopy
[nutanix@nkp-boot ~]$ cat <<EOF > configmap.yamlapiVersion v1kind ConfigMapmetadataname logging-operator-logging-overridesnamespace kommanderdatavalues.yaml
|fluentdresourceslimitscpu 4EOFvalues.yaml |fluentdresourceslimitscpu 4memory 4Girequestscpu
1memory 1000MiEOF - B. bashCopy
[nutanix@nkp-boot ~]$ cat <<EOF > configmap.yamlapiVersion v1kind ConfigMapmetadataname logging-operator-logging-overridesnamespace kommanderdatavalues.yaml
|fluentdresourceslimitscpu 1memory 1000Mirequestscpu 4memory 4GiEOF - C. bashCopy
[nutanix@nkp-boot ~]$ cat <<EOF > configmap.yamlapiVersion: v1kind:
ConfigMapmetadata:name:
logging-operator-logging-overridesnamespace: kommanderdata:values.yaml:
|fluentdresourceslimitscpu 4memory 1000Mirequestscpu 1memory 4GiEOF - D. bashCopy
[nutanix@nkp-boot ~]$ cat <<EOF > configmap.yamlapiVersion: v1kind:
ConfigMapmetadata:name:
logging-operator-logging-overridesnamespace: kommanderdata:values.yaml:
|fluentd:resources:limits:cpu: 4memory: 4Girequests:cpu: 4memory: 4GiEOF
Answer: D
NEW QUESTION # 24
A company recently deployed NKP. A Platform Engineer was asked to attach the existing Amazon EKS. A workspace and project were created accordingly, and resource requirements were met. What does the engineer need to do first to prepare the EKS clusters?
- A. Deploy cert-manager in the EKS clusters.
- B. Configure HAProxy to get connected to EKS clusters.
- C. Create a service account with cluster-admin permissions.
- D. Configure a ConfigMap according to EKS configuration.
Answer: C
NEW QUESTION # 25
After selecting the Production workspace and selecting View Details for the cluster prod-01, a Platform Engineer wanted to enable the NKP Insights application. This application is under the Observability category, but this category doesn't appear in the list. Which action should the engineer take to be able to deploy the NKP Insights application in the Kubernetes cluster for this workspace?
- A. Select Clusters in the left menu, select View Details for the cluster prod-01, then in the Application Dashboard, select Enable in the NKP Insights three-dot menu.
- B. Select Insights in the left menu and select the Enable button.
- C. Select Applications in the left menu, press the three-dot menu in the NKP Insights application option, and select Enable.
- D. Select Clusters in the left menu, select Applications, and select Enable in the NKP Insights three- dot menu.
Answer: A
NEW QUESTION # 26
A Platform Engineer needs to create an NKP custom image for vSphere.
Which option should the engineer use?
- A. Hashicorp Packer
- B. Konvoy Image Builder
- C. Nutanix Image Builder
- D. RedHat Satellite
Answer: B
NEW QUESTION # 27
A Platform Engineer is deploying a new Kubernetes application in Amazon Web Services (AWS) Elastic Container Service for Kubernetes (EKS) and Azure Kubernetes Service (AKS). The engineer's team has decided to use a custom image instead of the default images provided by AWS or Azure for their clusters. What functionality will the engineer lose in both AWS EKS and Azure AKS by choosing to use a custom image?
- A. Built-in autoscaling and security capabilities
- B. Cluster networking and load balancing
- C. Native monitoring tools, logging, and alerting
- D. Ability to use GPUs and persistent storage
Answer: A
NEW QUESTION # 28
At a national defense company, protecting sensitive data is their top priority. With the increase in cyber-attacks, they have decided to implement an air-gapped Kubernetes environment to manage their critical applications, ensuring that no information could leak to the outside. The Kubernetes environment has three clusters deployed for their applications with centralized management. What type of licensing is required to enable this environment?
- A. NKP UI
- B. NKP Starter
- C. NKP Ultimate
- D. NKP Pro
Answer: C
NEW QUESTION # 29
A Platform Engineer manages an NKP environment and is preparing a machine image to become an NKP cluster node. Which statement is correct regarding the default node preparation process?
- A. Packer is used to make the OS image CAPI-compliant for use as an NKP node.
- B. Ansible is used to make the OS image CAPI-compliant for use as an NKP node.
- C. Goss is used to harden the OS image for use as an NKP node.
- D. Terraform is utilized to clone an existing OS image for use as an NKP node.
Answer: A
NEW QUESTION # 30
A Platform Engineer is preparing to deploy a new NKP cluster on Nutanix infrastructure into an air- gapped environment. As part of the preparation process, the engineer is supplying a Ubuntu
22.04 instance to be used for NKP cluster nodes that conforms to the corporate OS image hardening standards. However, during the NIB preparation process, the error shown in the exhibit is received. What is the likely reason the NIB preparation attempt has failed?
- A. The engineer has not seeded the local registry with the required NKP images prior to the NIB-prep attempt.
- B. The engineer has not created the OS package bundle prior to the NIB-prep attempt.
- C. The engineer has supplied the inartifacts directory for the OS package bundle in the NIB-prep command.
- D. Ubuntu 22.04 is not a supported OS for NKP nodes on Nutanix infrastructure, therefore the necessary OS package bundle does not exist.
Answer: B
NEW QUESTION # 31
A company has a new DevOps team that needs to be provided cloud native computing resources. This team will need to have access to multiple NKP clusters for development, testing and validation of an in-house application. However, they also need to be restricted to a specific namespace and a consistent level of access across the clusters within this namespace so that they do not adversely impact the environment of other user groups or the clusters themselves. As a part of this consideration, the new team also needs to be limited to the amount of storage, CPU and memory they can consume on the clusters. A Platform Engineer has been tasked with providing the appropriate level of access to the team on these multiple NKP clusters.
How should the engineer best accomplish this task?
- A. 1.Create an NKP project and assign the NKP clusters to it.2.Create quotas for the NKP project.3.Create an NKP group for the DevOps team.4.Assign that NKP group the proper RBAC roles within that NKP project.
- B. 1.Create an NKP workspace and assign the NKP clusters to it.2.Create quotas for the NKP workspace.3.Create an NKP group for the DevOps team.4.Assign that NKP group the proper RBAC roles within that NKP workspace.
- C. 1.Create an NKP group for the DevOps team.2.Assign that NKP group the proper RBAC roles in the NKP UI.3.Select the export to yaml option once the RBAC role assignment to that NKP group is complete.4.Apply the exported manifest to each of the NKP clusters using kubectl.
- D. 1.Enable Gatekeeper on the NKP clusters.2.Create an NKP group for the DevOps team.3.Assign Gatekeeper quota and authorization policies to that NKP group.
Answer: C
NEW QUESTION # 32
......
Nutanix Certified NCP-CN-6.10 Dumps Questions Valid NCP-CN-6.10 Materials: https://www.freecram.com/Nutanix-certification/NCP-CN-6.10-exam-dumps.html
Get The Most Updated NCP-CN-6.10 Dumps To Nutanix Certification Certification: https://drive.google.com/open?id=1kzrF3LHa_4B4Q6W8jCdfvQ5u7v9QjueJ