[Full-Version] 2025 New JN0-1103 Actual Exam Dumps, Juniper Practice Test
Study HIGH Quality JN0-1103 Free Study Guides and Exams Tutorials
NEW QUESTION # 23
What are two valid reasons to implement a network management solution within your network infrastructure? (Choose two.)
- A. to increase network visibility
- B. to reduce network capital expenditures
- C. to eliminate the need for network planning
- D. to reduce network operating expenditures
Answer: A,D
NEW QUESTION # 24
You are reviewing an existing corporate network design with a plan to reduce the number of data centers deployed by a customer.
Which three considerations are relevant to this exercise? (Choose three.)
- A. data repositories/distribution
- B. cable plant infrastructure
- C. RFC1918 addressing
- D. data center interconnects
- E. high availability considerations
Answer: A,D,E
NEW QUESTION # 25
You want to stretch Layer 2 traffic between two data centers.
Which three open standards protocols would be used for this task? (Choose three.)
- A. GRE
- B. EVPN
- C. FabricPath
- D. OTV
- E. VPLS
Answer: A,B,E
NEW QUESTION # 26
You are designing a WAN implementation to securely connect two remote sites to the corporate office. A public Internet connection will be used for the connections.
Which statement is true in this situation?
- A. The connection should be secured using IPsec.
- B. The WAN edge devices must support MPLS.
- C. The connections support Layer 2 traffic bridging
- D. The service provider can isolate traffic in a private MPLS instance.
Answer: A
NEW QUESTION # 27
Your customers new network contains network devices from multiple vendors. You have been asked to propose two technologies that will work among all the vendors' networking equipment.
Which two technologies can you recommend for the design? (Choose two.)
- A. MSTP
- B. IGMPv3
- C. CGMP
- D. VTP
Answer: A,B
NEW QUESTION # 28
Which statements is true in regards to the Formulate the Plan step of business continuity planning?
- A. You should perform a risk assessment.
- B. You should perform a business impact analysis.
- C. You should develop a plan of action to mitigate the risks.
- D. You should list all the functions and services in the network.
Answer: C
NEW QUESTION # 29
Which two statements are true in regards to the solution overview section of an RFP? (Choose two.)
- A. It contains the bill of materials.
- B. It should address the customer's goals, scope, and requirements.
- C. It is an overview of Juniper's value proposition to the customer.
- D. It should outline the technical benefits of the proposed design.
Answer: B,D
NEW QUESTION # 30
A service provider has requested that you develop a design for a new network deployment focused on a call center customer.
What are two success criteria from the stakeholder's point of view with respect to this network deployment? (Choose two.)
- A. multicast stream replication must follow MSDP path
- B. end user demand for low latency voice connections
- C. requirement for secure data transmissions
- D. easy deployment of the solution by the service provider
Answer: B,C
NEW QUESTION # 31
What are three relevant considerations for determining the appropriate amount of bandwidth for a site? (Choose three.)
- A. square footage (or meters) for that site
- B. available power at that site
- C. equipment types at that site
- D. applications used at that site
- E. quantity of users at that site
Answer: C,D,E
NEW QUESTION # 32
The business requirements RFP element contains which two items? (Choose two.)
- A. A detailed report that describes the facility specifications.
- B. A summary the type of business the customer is in.
- C. The number of users and workstation requirements.
- D. An explanation of why a new design is required.
Answer: B,D
NEW QUESTION # 33
You are asked to develop a high-level design to meet a customer's requirement to transition an aging switched infrastructure to a newer approach, meeting their needs for the next five years.
In your presentation to the IT department, which three areas are important to define? (Choose three.)
- A. cost of the proposed solution
- B. business costs of not going forward
- C. recommendations for IGP timers
- D. configuration stanza for class of service definition
- E. impact to the business from an operations perspective
Answer: A,B,E
NEW QUESTION # 34
Your campus network is rolling out a BYOD policy. Your design must ensure that guest users are restricted from accessing internal network resources.
Which two actions would solve this problem? (Choose two.)
- A. Guest users should be placed in a non-isolated guest routing instance.
- B. Guest users should be placed in an isolated guest VLAN.
- C. Guest users should be placed in a non-isolated guest VLAN.
- D. Guest users should be placed in an isolated guest routing instance.
Answer: B,D
NEW QUESTION # 35
Which two industry standard automation platforms are used to provision Juniper data center switches?
(Choose two.)
- A. Tivoli
- B. Python
- C. OpenView
- D. Chef
Answer: B,D
NEW QUESTION # 36
Which two statements are true in regards to design proposals? (Choose two.)
- A. Security only needs to be considered after the network is in place and functioning.
- B. There is no need to document your design proposal.
- C. You design proposal should be clearly documented.
- D. Security should be considered throughout the design process.
Answer: C,D
NEW QUESTION # 37
Which two statements are true in regards to the technical specifications section of an RFP? (Choose two.)
- A. It should contain the bill of materials.
- B. It should contain the logical and physical topology design requirements.
- C. It should address the customer's goals, scope, and requirements.
- D. It is likely to be read by all decision makers.
Answer: A,B
NEW QUESTION # 38
A company asks you to develop a solution to provide secure access to the corporate network with a goal of providing a differentiated security policy per role and per device.
Which three measurements do you need to satisfy the company's requirement? (Choose three.)
- A. the number of power over Ethernet ports
- B. the number of physical desktop ports
- C. the number of guest access users
- D. the number of unmanned IP enabled end-point systems the number of WLAN access points
Answer: B,C,D
NEW QUESTION # 39
Your corporate campus consists of a single large building with several thousand users.
Employees are located randomly throughout the building. Accounting employees are mixed in with engineers and sales. You want to separate users into functional groups.
Which technology should be used to accomplish this task?
- A. VLAN
- B. IPsec
- C. MPLS
- D. OSPF
Answer: A
NEW QUESTION # 40
Which two metrics are important for determining the size and scope of a new network design?
(Choose two.)
- A. implementation time frame
- B. training requirements
- C. number of users
- D. location of users
Answer: C,D
NEW QUESTION # 41
A customer has determined the need to upgrade the network so that the packaging and shipping facilities can meet current demand. The customer has voiced concerns that the network design and implementation cannot affect current sales in any way.
What are two ways to address this concern in your network design? (Choose two.)
- A. Analyze packet flow.
- B. Define security measures.
- C. Collect job aids.
- D. Create continuity plans.
Answer: A,D
NEW QUESTION # 42
You have an access switch that must connect to an aggregation switch. The two switches are 2,600 feet (800 meters) apart.
Which type of media would be used to connect the Layer 2 switches?
- A. multimode fiber
- B. cat6E cable
- C. single-mode fiber
- D. cat5 cable
Answer: C
NEW QUESTION # 43
......
Get 100% Real Free Design Track Certification JN0-1103 Sample Questions: https://www.freecram.com/Juniper-certification/JN0-1103-exam-dumps.html
Download Juniper JN0-1103 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1ZlpPbKQLLrTDxi4WALojP3uyt8RfmotM