Get Ready to Pass the 5V0-33.23 exam Right Now Using Our VMware Certified Master Specialist Exam Package
Enhance Your Career With Available Preparation Guide for 5V0-33.23 Exam
NEW QUESTION # 37
Which statement is true regarding how vSphere High Availability (HA) provides rapid recovery from outages in VMware Cloud on AWS?
- A. vSphere HA is enabled by default in VMware Cloud on AWS but can be disabled or modified.
- B. Sphere HA restarts virtual machines if their host becomes isolated on the VMware vSAN network.
- C. vSphere HA restarts impacted virtual machines on another host when an application fails.
- D. vSphere HA restarts impacted virtual machines (VMs) on another host when a VM stops sending heartbeats or the VM process fails (vmx).
Answer: C
Explanation:
Hosts in the cluster are monitored and in the event of a failure, the virtual machines on a failed host are restarted on alternate hosts.
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.avail.doc/GUID-33A65FF7-DA22-4DC5-8B18-5A7F97CCA536.html
NEW QUESTION # 38
Which statement is true about a VMware Cloud on AWS software-defined data center (SDDC)?
- A. It is a VMware environment with VMware vCenter Server, VMware vSAN and VMware NSX-T managing native AWS Elastic Compute Cloud (EC2) instances and able to consume native AWS services.
- B. It is a VMware environment integrating VMware vCenter Server, VMware vSAN and VMware NSX-Tthat runs VMware ESXi on an AWS Elastic Compute Cloud (EC2) bare-metal infrastructure and is able to consume native AWS services.
- C. It is a VMware environment integrating VMware vCenter Server, VMware vSAN and VMware NSX-Tthat runs nested VMware ESXi on AWS Elastic Compute Cloud (EC2) instances and is able to consume native AWS services.
- D. It is a VMware environment integrating VMware vCenter Server, VMware vSAN and, optionally, VMware NSX-Tthat runs on an AWS Elastic Compute Cloud (EC2) bare-metal infrastructure and is able to consume native AWS services.
Answer: C
NEW QUESTION # 39
What is the maximum Gbps of bandwidth that each AWS Elastic Network Adapter (ENA) provides on a i3.metal host?
- A. 50Gbps
- B. 25Gbps
- C. 100Gbps
- D. 10Gbps
Answer: B
Explanation:
I3 instances offer up to 25 Gbps of network bandwidth and up to 14 Gbps of dedicated bandwidth to Amazon Elastic Block Store (Amazon EBS).
Reference: https://aws.amazon.com/ec2/instance-types/i3/
NEW QUESTION # 40
A company is operating a main data center and two smaller data centers in branch offices. The main data center is being replicated to a disaster recovery site at a co-located data center with a recovery point objective (RPO) of five minutes and a recovery time objective (RTO) of two hours. The branch data centers are shipping backup tapes to the main data center on a weekly basis.
What would be a cost-efficient VMware solution that would improve RTO and RPO for the branch office data centers while maintaining the recovery time for the main data center?
- A. Create a software-defined data center (SDDC) in VMware Cloud on AWS. Create a shared content librand let the branch offices subscribe to it. Export the virtual machines in the branch offices to OVF files on the shared content library on a weekly basis.
- B. Create a software-defined data center (SDDC) in VMware Cloud on AWS. Activate VMware Site Recovery. Replace the co-located disaster recovery (DR) site for the main data center with VMware Site Recovery. For the branch offices, implement VMware Cloud Disaster Recovery (VCDR).
- C. Create a software-defined data center (SDDC) in VMware Cloud on AWS. Replace the co-located site for the main data center and the backup tape shipping for the branch offices with VMware Cloud Disaster Recovery (VCDR).
- D. Create a software-defined data center (SDDC) in VMware Cloud on AWS. Migrate the disaster recovery solution from the co-located data center to the VMware Cloud on AWS SDDC. Create regular copies of the virtual machines at the branch offices and use AWS Snowball to directly ship the copies to an AWS data center and store them on AWS S3 buckets.
Answer: A
NEW QUESTION # 41
Which two VMware Cloud on AWS maintenance tasks are the responsibility of AWS personnel? (Choose two.)
- A. Back up and restore VMware appliances and infrastructure.
- B. Patch VMware Cloud on AWS components.
- C. Upgrade workload VMware Tools.
- D. Refresh hardware and replace failed components.
Answer: B,D
Explanation:
Reference:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/support/vmw-cloud-aws-service-description.pdf
NEW QUESTION # 42
Which three of the listed VMware Cloud on AWS service roles can be assigned from the VMware Cloud console? (Choose three.)
- A. NSX Cloud Auditor
- B. NSX Cloud Admin
- C. Administrator (Delete Restricted)
- D. Root
- E. vCenter Administrator
- F. SSO Administrator
Answer: A,B,C
Explanation:
Reference: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.getting-started/GUID-83DC5E26-B1C5-47C2-B14C-940D01B2A44C.html
NEW QUESTION # 43
When configuring Hybrid Linked Mode from the vCenter Cloud Gateway appliance, which groups are mapped from a customer's on-premises environment to the cloud?
- A. LDAP Groups
- B. Local Groups
- C. Active Directory Groups
- D. vSphere Groups
Answer: C
NEW QUESTION # 44
What are three benefits of using VMware Cloud on AWS? (Choose three.)
- A. Native VMware workloads can be migrated back and forth between on-premises VMware vSphere environments and VMware Cloud on AWS.
- B. VMware Cloud on AWS supports optimized virtual AWS Elastic Compute Cloud (EC2) instances.
- C. With VMware Cloud on AWS, IT teams can manage their native AWS resources with familiar VMware tools.
- D. With VMware Cloud on AWS, IT teams can manage their VMware Cloud on AWS resources with familiar VMware tools.
- E. With VMware Cloud on AWS, VMware and AWS administrators will manage, maintain and update all virtual machines.
- F. Native AWS services can be consumed over the global AWS backbone with high bandwidth and low latency.
Answer: B,D,E
Explanation:
IT teams manage their cloud-based resources with familiar VMware tools.
Amazon Elastic Compute Cloud (Amazon EC2) is a web service that provides secure, resizable compute capacity in the cloud. It is designed to make web-scale cloud computing easier for developers.
Managing Virtual Machines in VMware Cloud on AWS.
Reference: https://docs.vmware.com/en/VMware-Cloud-on-AWS/solutions/VMware-Cloud-on-AWS.39646badb412ba21bd6770ef62ae00a2/GUID-2EF52910E0945214C0020069FDCD484E.html
NEW QUESTION # 45
What are three possible reasons that would prevent virtual machines from migrating to VMware Cloud on AWS using VMware vSphere vMotion? (Choose three.)
- A. The virtual machine (VM) remote console is open.
- B. Remote devices are attached.
- C. The virtual machine (VM) is a linked clone.
- D. Paravirtual SCSI disks are mounted.
- E. Virtual serial ports are connected with network output.
- F. VMware Tools are NOT installed.
Answer: C,D,F
NEW QUESTION # 46
A customer is deploying a new solution based on VMware Cloud on AWS. The customer is already running several native AWS services and would like the new workloads deployed into VMware Cloud on AWS to consume these services without incurring additional traffic charges. During the initial deployment of the VMware Cloud on AWS software-defined data center (SDDC), which option must the customer choose to meet the requirement?
- A. Choose a connected Virtual Private Cloud (VPC) that is located in the same availability zone as the native AWS services to be consumed.
- B. Any availability zone within the same AWS region can be selected. After the SDDC deployment, deploy a services gateway and connect it to the target availability zone.
- C. Choose a connected Virtual Private Cloud (VPC) that is located in the same region as the native AWS services to be consumed.
- D. Choose a subnet from the connected Virtual Private Cloud (VPC) that is located in the same availability zone as the native AWS services to be consumed.
Answer: C
NEW QUESTION # 47
Which method can be used to deploy a VMware Cloud on AWS software-defined data center?
- A. VMware Data Center Command-Line Interface
- B. AWS Management Console
- C. REST APIs
- D. VMware vCenter Server
Answer: D
Explanation:
You can also use hybrid linked mode to view and manage your onpremises vCenter Server and the one in your VMware Cloud on AWS SDDC with a common set of user identities.
Reference: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-manage-data-center-vms.pdf
NEW QUESTION # 48
An administrator has deployed VMware Cloud on AWS and requires a single broadcast domain for a set of virtual machines that reside both in the data center and in the software-defined data center (SDDC) over a DirectConnect connection.
How can the administrator accomplish this without adding additional components in the cloud?
- A. Duplicate the IP space in both locations and manually move the virtual machines.
- B. Deploy VMware HCX and a Service Mesh with a Network Extension appliance.
- C. Use a third-party networking tool to extend the broadcast domain.
- D. Deploy a Layer 2 Virtual Private Network (L2VPN).
Answer: D
Explanation:
Reference: https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/vmw-deploy-horizon-seven-on-vmware-cloud-on-aws.pdf
NEW QUESTION # 49
An administrator is looking to establish a hybrid connection between on-premises and VMware Cloud on AWS software-defined data center (SDDC) environments in order to migrate virtual machines. The on-premises environment is NOT using NSX today; however, the administrator wants to avoid having to change IP addresses after each migration, and there are some applications that require the same broadcast domain.
Which connection is needed to meet these requirements?
- A. Policy-based VPN
- B. AWS Direct Connect
- C. Route-based VPN
- D. Layer 2 VPN (L2VPN)
Answer: C
NEW QUESTION # 50
What is the minimum value for Maximum Transmission Unit (MTU) of the AWS network hardware used with VMware Cloud on AWS?
- A. 1492 MTU
- B. 1500 MTU
- C. 1600 MTU
- D. 9000 MTU
Answer: B
Explanation:
Reference: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.networking-security/GUID-1B51A82F-1AB5-4D35-A170-1044A3A85913.html
NEW QUESTION # 51
To assist with seasonal workload demands over the next two months, a group of interns are hired to assist with day 2 virtual machine operations in VMware Cloud on AWS.
Which method should be used for creating these temporary user accounts and assigning the appropriate permissions to them?
- A. Create the required user accounts within Active Directory and assign them to the required group. With Hybrid Linked Mode enabled, assign the correct role in VMware Cloud on AWS to the Active Directory group that contains the user accounts.
- B. Log into on-premises VMware vCenter. Create the required number of user accounts in the vsphere. local SSO domain and assign the appropriate roles to the accounts. Ensure that Hybrid Linked Mode is enabled to allow account propagation to the VMware Cloud on AWS SSO domain.
- C. Log into vCenter in VMware Cloud on AWS with the CloudAdmin account. Create the required number of user accounts in the vsphere. local SSO domain and assign the appropriate roles to the accounts in Active Directory.
- D. Log into vCenter in VMware Cloud on AWS with the CloudAdmin account. Create the required number of user accounts in the vmc.local SSO domain and assign the appropriate roles to the accounts.
Answer: B
NEW QUESTION # 52
A customer plans to use VMware Cloud on AWS to support their public cloud adoption initiatives. Their use case for VMware Cloud on AWS is predominately data center extension to support seasonal and business specific demands. There will also be a number of workloads running in VMware Cloud on AWS on a long-term, permanent basis. Based on a recent sizing assessment, it is determined that utilization of VMware Cloud on AWS will fluctuate between two and five hosts throughout the year based on seasonal and market conditions.
Which possible subscription option would result in the greatest benefit to this customer and why?
- A. Consume VMware Cloud on AWS on-demand based on seasonal and business requirements. This option provides the cost benefits of cloud through an on-demand consumption model.
- B. Create a subscription for five hosts for three years. This option provides the greatest cost savings to the customer and eliminates the amount of time needed to provision and configure VMware ESXi hosts as consumption fluctuates.
- C. Create a subscription for three hosts for three years and consume the remaining hosts, as needed, on-demand. This option allows the customer to lock in a term rate for required hosts and leverage on-demand rates for additional hosts as needed.
- D. Create a subscription for two hosts for one year and consume the remaining hosts, as needed, on-demand. This option allows the customer to lock in a term rate for required hosts and leverage on-demand rates for additional hosts as needed.
Answer: C
NEW QUESTION # 53
An administrator runs an analysis on all workloads using Live Optics and confirms there are a variety of applications, including Microsoft SQL server and Oracle databases. The Microsoft SQL workloads are averaging 4,000 IOPS per virtual machine, approximately 50% writes. The Oracle workloads are averaging 3,000 IOPS per virtual machine, and approximately 80% writes.
Which method should be used to input the data into the VMware Cloud on AWS Sizer for the most accurate results?
- A. Use the Advanced Sizer in 'import' mode. Import the Live Optics data and let the Advanced Sizer set the values forvCPU. vRAM. utilized storage. IOPS and I/O automatically.
- B. Use the Advanced Sizer in 'database' mode. Create workload profiles for the analyzed virtual machines, including profiles for Microsoft SQL and Oracle. Set the values forvCPU. vRAM. utilized storage. IOPS and I/O profile manually.
- C. Use the Advanced Sizer in 'manual' mode. Create workload profiles for the analyzed virtual machines, including profiles for Microsoft SQL and Oracle. Use the default values for the SQL and Oracle workload profiles.
- D. Use the Quick Sizer. Set the values forvCPU, vRAM. utilized storage. IOPS and I/O profile manually.
Answer: C
NEW QUESTION # 54
An administrator is asked to create a new network segment in VMware Cloud on AWS. This network segment should be accessible from the on-premises data center.
How would the administrator create this new network and what segment type should it be?
- A. - Connect to the on-premises VMware vCenter Server and create the network segment through the VMware vSphere user interface.
- Select the stretched network segment type. - B. - Connect to the VMware Cloud console to create the network segment.
- Select the routed network segment type. - C. - Connect to the VMware Cloud console to create the network segment.
- Select the extended network segment type. - D. - Connect to the VMware Cloud on AWS vCenter Server and create the network segment through the VMware vSphere user interface - Select the routed network segment type.
Answer: C
Explanation:
Reference: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.networking-security/GUID-267DEADB-BD01-46B7-82D5-B9AA210CA9EE.html
NEW QUESTION # 55
Which two statements are true for the pre-defined resource pools in VMware Cloud on AWS? (Choose two.)
- A. All workload virtual machines are created in the top-level (root) Compute-ResourcePool by default.
- B. Users can rename child resource pools to better match company policy.
- C. The Mgmt-Re source Poo I is able to utilize resources in subsequently created clusters if needed.
- D. Users can modify the pre-configured vSphere DRS settings in their own Compute-ResourcePool.
- E. Users are allowed to monitor and modify the resource allocation settings in the Mgmt-RsourcePool.
Answer: A,B
Explanation:
Rename the resource pools to better match company policy.
By default, all workload virtual machines are created in the top-level (root) Compute-ResourcePool.
Reference:
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-manage-data-center-vms.pdf
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-CCC16E07-7017-44B4-948E-A558A87BA070.html
NEW QUESTION # 56
An environment is running a VMware Cloud on AWS software-defined data center (SDDC) with six i3.metal hosts. Storage space usage has increased and the administrator is required to add storage capacity.
Which two approaches can the administrator take to add storage capacity? (Choose two.)
- A. Add additional i3en.metal hosts and migrate the storage-bound virtual machines to the i3en.metal hosts.
- B. Deploy an additional cluster based on i3en.metal hosts and migrate the storage-bound virtual machines to the i3en.metal hosts.
- C. Add additional i3.metal hosts to increase the total vSAN storage space.
- D. Deploy Amazon Elastic Block Store (EBS) storage volumes (GP2) from the AWS console and attach them to the i3.metal hosts. Allow VMware vSAN extend the storage capacity automatically.
- E. Deploy Amazon Elastic File System (EFS) file shares from the AWS console and attach them to the i3.metal hosts. Use VMware Storage vMotion to migrate the storage-bound virtual machines to the Amazon EFS data stores.
Answer: C,D
Explanation:
Reference: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html
NEW QUESTION # 57
......
Get Special Discount Offer of 5V0-33.23 Certification Exam Sample Questions and Answers: https://www.freecram.com/VMware-certification/5V0-33.23-exam-dumps.html
New 5V0-33.23 Dumps For Preparing VMware Certified Master Specialist Certified VMware Exam Well: https://drive.google.com/open?id=1mlusZQMwcD1bFfsTlDicrUbuPDzWxzg4