[Jan 10, 2024] NSE8_812 Exam Dumps - Try Best NSE8_812 Exam Questions - FreeCram
Verified NSE8_812 exam dumps Q&As with Correct 62 Questions and Answers
Fortinet NSE8_812 exam, also known as the Fortinet NSE 8 - Written Exam, is a certification exam that measures the knowledge and skills of candidates in designing, implementing, and managing complex security solutions using Fortinet products. It is the highest-level certification offered by Fortinet, and passing NSE8_812 exam is a requirement for becoming a Fortinet Network Security Expert (NSE) 8.
To prepare for the Fortinet NSE8_812 exam, candidates are recommended to take the Fortinet NSE 8 training courses, which cover all the topics included in the exam. They can also use study guides, practice exams, and other resources available online. Fortinet also offers a certification program that provides candidates with the opportunity to gain hands-on experience working with Fortinet products and technologies.
NEW QUESTION # 16
An HA topology is using the following configuration:
Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?
- A. 600ms
- B. 200ms
- C. 300ms
- D. 100ms
Answer: B
Explanation:
The HA heartbeat interval is 100ms, and the number of lost heartbeats before a failover is detected is 2. So, it will take 2 * 100ms = 200ms for a failover to be detected by the secondary cluster member.
Reference:
FortiGate High Availability: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/647723/link-monitoring-and-ha-failover-time
NEW QUESTION # 17
Refer to the exhibits.
A customer has deployed a FortiGate with iBGP and eBGP routing enabled. HQ is receiving routes over eBGP from ISP 2; however, only certain routes are showing up in the routing table-Assume that BGP is working perfectly and that the only possible modifications to the routing table are solely due to the prefix list that is applied on HQ.
Given the exhibits, which two routes will be active in the routing table on the HQ firewall? (Choose two.)
- A. 172.16.204.64/27
- B. 172,620,64,27
- C. 172.16.204.128/25
- D. 172.16.201.96/29
Answer: B,C
Explanation:
A is correct because 172.16.204.128/25 matches the prefix list entry 172.16.204.0/24 ge 25 le 25. C is correct because 172.16.204.64/27 matches the prefix list entry 172.16.204.0/24 ge 27 le 27. Reference: https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/bgp
NEW QUESTION # 18
An automation stitch was configured using an incoming webhook as the trigger named 'my_incoming_webhook'. The action is configured to execute the CLI Script shown:
- A.
- B.
- C.
- D.
Answer: D
Explanation:
To execute the CLI script shown using an incoming webhook as the trigger, the correct syntax for the curl command is: curl -X POST -H "Content-Type: application/json" -d '{"trigger_name":"my_incoming_webhook"}' https://fortisoar.example.com/api/v1/trigger This command will send a POST request to the FortiSOAR API endpoint with the trigger name and the content type as JSON. The FortiSOAR API will then execute the automation stitch that matches the trigger name and run the CLI script on the FortiGate device. Reference: https://docs.fortinet.com/document/fortisoar/7.0.0/administration-guide/103440/automation-stitches https://docs.fortinet.com/document/fortisoar/7.0.0/administration-guide/103441/incoming-webhook
NEW QUESTION # 19
Refer to the exhibits.
A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.) A)
B)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B,C
Explanation:
To enable application detection on plain-text traffic that has been decrypted by FortiADC, the administrator must perform two configuration tasks on CL-1:
Enable SSL offloading in the firewall policy and select the SSL-Offload protocol options profile.
Enable application control in the firewall policy and select the SSL-Offload-App-Detect application list. References: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection-on-ssl-offloaded-traffic
NEW QUESTION # 20
Which two statements are correct on a FortiGate using the FortiGuard Outbreak Protection Service (VOS)? (Choose two.)
- A. The FortiGuard VOS can be used only with proxy-base policy inspections.
- B. If third-party AV database returns a match the scanned file is deemed to be malicious.
- C. The hash signatures are obtained from the FortiGuard Global Threat Intelligence database.
- D. The AV engine scan must be enabled to use the FortiGuard VOS feature
- E. The antivirus database queries FortiGuard with the hash of a scanned file
Answer: C,E
Explanation:
The FortiGuard Outbreak Prevention Service (VOS) is a feature that enhances the antivirus scanning capabilities of FortiGate by querying FortiGuard with the hash of a scanned file that is not found in the local antivirus database. If the hash matches a signature in the FortiGuard Global Threat Intelligence database, which contains information about known malware and zero-day threats, the file is deemed to be malicious and blocked by FortiGate. The VOS feature can be used with both proxy-based and flow-based policy inspections, and does not require the AV engine scan to be enabled. Reference: https://docs.fortinet.com/document/fortigate/6.2.14/cookbook/968606/outbreak-prevention-service
NEW QUESTION # 21
Refer to the exhibits.
A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)
- A. Ports 3 and 4 can be part of different switch interfaces.
- B. FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.
- C. Client devices must have 802 1X authentication enabled
- D. Devices connected directly to ports 3 and 4 can perform 802 1X authentication.
Answer: C,D
Explanation:
The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a single switch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named "lan", which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named "ssl-inspection". The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address. Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware-switch-interfaces https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x-authentication
NEW QUESTION # 22
Refer to the exhibit.
You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:
FGT_1 and FGT_3 are configured with the default setting. Which statement is true for the synchronization of fabric-objects?
- A. Objects from the FortiGate FGT_2 will be synchronized to the upstream FortiGate.
- B. Objects from the root FortiGate will only be synchronized to FGT_3.
- C. Objects from the root FortiGate will only be synchronized to FGT__2.
- D. Objects from the root FortiGate will not be synchronized to any downstream FortiGate.
Answer: D
Explanation:
The fabric-object-unification setting on FGT_2 is set to local, which means that objects will not be synchronized to any other FortiGate devices in the security fabric. The default setting for fabric-object-unification is default, which means that objects will be synchronized from the root FortiGate to all downstream FortiGate devices.
Since FGT_2 is not the root FortiGate and the fabric-object-unification setting is set to local, objects from the root FortiGate will not be synchronized to FGT_2.
Reference:
Synchronizing objects across the Security Fabric: https://docs.fortinet.com/document/fortigate/6.4.0/administration-guide/880913/synchronizing-objects-across-the-security-fabric
NEW QUESTION # 23
Review the VPN configuration shown in the exhibit.
What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?
- A. 1 redundant packet for every 10 base packets
- B. 3 redundant packet for every 5 base packets
- C. 3 redundant packet for every 9 base packets
- D. 2 redundant packet for every 8 base packets
Answer: B
Explanation:
Forward Error Correction (FEC) is a feature that can improve the quality of SD-WAN network traffic by adding redundant packets to the original packets. The ratio of redundant packets to base packets is determined by the FEC mode, which can be set to low, medium, or high. In low mode, the ratio is 1:10, in medium mode, the ratio is 2:8, and in high mode, the ratio is 3:5. The FEC mode can be configured manually or automatically based on the bandwidth and packet loss of the network. In this case, since the download bandwidth is 500 Mbps and the packet loss is 8%, the FEC mode is automatically set to high, which means that 3 redundant packets are added for every 5 base packets. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan/19662/forward-error-correction-fec
NEW QUESTION # 24
Refer to the CLI output:
Given the information shown in the output, which two statements are correct? (Choose two.)
- A. Reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored
- B. An IP address that was previously used by an attacker will always be blocked
- C. Geographical IP policies are enabled and evaluated after local techniques.
- D. Attackers can be blocked before they target the servers behind the FortiWeb.
- E. The IP Reputation feature has been manually updated
Answer: A,D
Explanation:
The CLI output shown in the exhibit indicates that FortiWeb has enabled IP Reputation feature with local techniques enabled and geographical IP policies enabled after local techniques (set geoip-policy-order after-local). IP Reputation feature is a feature that allows FortiWeb to block or allow traffic based on the reputation score of IP addresses, which reflects their past malicious activities or behaviors. Local techniques are methods that FortiWeb uses to dynamically update its own blacklist based on its own detection of attacks or violations from IP addresses (such as signature matches, rate limiting, etc.). Geographical IP policies are rules that FortiWeb uses to block or allow traffic based on the geographical location of IP addresses (such as country, region, city, etc.). Therefore, based on the output, one correct statement is that attackers can be blocked before they target the servers behind the FortiWeb. This is because FortiWeb can use IP Reputation feature to block traffic from IP addresses that have a low reputation score or belong to a blacklisted location, which prevents them from reaching the servers and launching attacks. Another correct statement is that reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored. This is because FortiWeb can use local techniques to remove IP addresses from its own blacklist if they stop sending malicious traffic for a certain period of time (set local-techniques-expire-time), which allows them to regain their reputation and access the servers. This is useful for IP addresses that are dynamically assigned by DHCP or PPPoE and may change frequently. Reference: https://docs.fortinet.com/document/fortiweb/6.4.0/administration-guide/19662/ip-reputation https://docs.fortinet.com/document/fortiweb/6.4.0/administration-guide/19662/geographical-ip-policies
NEW QUESTION # 25
Refer to the exhibit.
You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.
You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
How should the initial connection be made?
- A. Connect the switch on any interface between ports 1 to 4
- B. Connect the switch on any interface between ports 25 to 28
- C. Connect the switch on any interface between ports 5 to 8.
- D. Connect the switch on any interface between ports 21 to 24
Answer: A
Explanation:
The FortiGate 6000F has 24 1/10/25-Gbps SFP28 data network interfaces (1 to 24). These interfaces are divided into the following interface groups: 1 to 4, 5 to 8, 9 to 12, 13 to 16, 17 to 20, and 21 to 24. The ports 25 to 28 are 40/100-Gbps QSFP28 data network interfaces.
The initial connection should be made to any interface between ports 1 to 4. This is because the ports 21 to 24 are part of the same interface group, and changing the speed of one of these ports will affect the speeds of all of the ports in the group. The ports 5 to 8 are also part of the same interface group, so they should not be used for the initial connection.
The new hardware module that will be installed in the switch will provide higher speed ports. When this module is installed, the speed of the ports 21 to 24 will be increased. However, this will not affect the ports 1 to 4, because they are not part of the same interface group.
Therefore, the initial connection should be made to any interface between ports 1 to 4, in order to ensure that the FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
Reference:
FortiGate 6000F Front Panel Interfaces: https://docs.fortinet.com/document/fortigate-6000/hardware/fortigate-6000f-system-guide/827055/front-panel-interfaces
NEW QUESTION # 26
Refer to the exhibit containing the configuration snippets from the FortiGate. Customer requirements:
* SSLVPN Portal must be accessible on standard HTTPS port (TCP/443)
* Public IP address (129.11.1.100) is assigned to portl
* Datacenter.acmecorp.com resolves to the public IP address assigned to portl The customer has a Let's Encrypt certificate that is going to expire soon and it reports that subsequent attempts to renew that certificate are failing.
Reviewing the requirement and the exhibit, which configuration change below will resolve this issue?
A)
B)
C)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
Explanation:
The customer's SSLVPN Portal is currently configured to use a self-signed certificate. This means that the certificate is not trusted by any browsers, and users will have to accept a security warning before they can connect to the portal.
To resolve this issue, the customer needs to configure the FortiGate to use a Let's Encrypt certificate. Let's Encrypt is a free certificate authority that provides trusted certificates for websites and other applications.
The configuration change in option B will configure the FortiGate to use a Let's Encrypt certificate for the SSLVPN Portal. This will allow users to connect to the portal without having to accept a security warning.
The other configuration changes are not necessary to resolve the issue. Option A will configure the FortiGate to use a different port for the SSLVPN Portal, but this will not resolve the issue with the self-signed certificate. Option C will configure the FortiGate to use a different DNS name for the SSLVPN Portal, but this will also not resolve the issue with the self-signed certificate. Option D will configure the FortiGate to use a different certificate authority for the SSLVPN Portal, but this will also not resolve the issue because the customer still needs to use a trusted certificate.
References:
Configuring SSLVPN with Let's Encrypt: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/822087/acme-certificate-support Let's Encrypt: https://letsencrypt.org/
NEW QUESTION # 27
Refer to the exhibits.
A customer has deployed a FortiGate with iBGP and eBGP routing enabled. HQ is receiving routes over eBGP from ISP 2; however, only certain routes are showing up in the routing table-Assume that BGP is working perfectly and that the only possible modifications to the routing table are solely due to the prefix list that is applied on HQ.
Given the exhibits, which two routes will be active in the routing table on the HQ firewall? (Choose two.)
- A. 172.16.204.64/27
- B. 172,620,64,27
- C. 172.16.204.128/25
- D. 172.16.201.96/29
Answer: A,C
Explanation:
The prefix list in the exhibit is configured to match prefixes that are either in the 172.16.204.0/24 subnet or in the 172.62.0.0/16 subnet. The routes that match these prefixes will be active in the routing table on the HQ firewall.
The routes that match the following prefixes will not be active in the routing table:
172.16.201.96/29
172.62.0.64/27
These routes do not match the criteria set by the prefix list.
References:
Prefix lists | FortiGate / FortiOS 7.4.0 - Fortinet Document Library
Configuring BGP | FortiGate / FortiOS 7.4.0 - Fortinet Document Library
NEW QUESTION # 28
You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster. Which statement about this solution is true?
- A. The configuration of the MTA Adapter Local Interface is different than on port1.
- B. The configuration is different than on a standalone device.
- C. The MTA adapter mode is only detection mode.
- D. The MTA adapter is only available in the primary node.
Answer: D
Explanation:
The MTA adapter feature on FortiSandbox is a feature that allows FortiSandbox to act as a mail transfer agent (MTA) that can receive, inspect, and forward email messages from external sources. The MTA adapter feature can be used to integrate FortiSandbox with third-party email security solutions that do not support direct integration with FortiSandbox, such as Microsoft Exchange Server or Cisco Email Security Appliance (ESA). The MTA adapter feature can also be used to enhance email security by adding an additional layer of inspection and filtering before delivering email messages to the final destination. The MTA adapter feature can be enabled on FortiSandbox in an HA-Cluster, which is a configuration that allows two FortiSandbox units to synchronize their settings and data and provide high availability and load balancing for sandboxing services. However, one statement about this solution that is true is that the MTA adapter is only available in the primary node. This means that only one FortiSandbox unit in the HA-Cluster can act as an MTA and receive email messages from external sources, while the other unit acts as a backup node that can take over the MTA role if the primary node fails or loses connectivity. This also means that only one IP address or FQDN can be used to configure the external sources to send email messages to the FortiSandbox MTA, which is the IP address or FQDN of the primary node. Reference: https://docs.fortinet.com/document/fortisandbox/3.2.0/administration-guide/19662/mail-transfer-agent-mta https://docs.fortinet.com/document/fortisandbox/3.2.0/administration-guide/19662/high-availability-ha
NEW QUESTION # 29
You are responsible for recommending an adapter type for NICs on a FortiGate VM that will run on an ESXi Hypervisor. Your recommendation must consider performance as the main concern, cost is not a factor. Which adapter type for the NICs will you recommend?
- A. Virtual Function (VF) PCI Passthrough
- B. Physical Function (PF) PCI Passthrough
- C. Native ESXi Networking with VMXNET3
- D. Native ESXi Networking with E1000
Answer: C
Explanation:
The FortiGate VM is a virtual firewall appliance that can run on various hypervisors, such as ESXi, Hyper-V, KVM, etc. The adapter type for NICs on a FortiGate VM determines the performance and compatibility of the network interface cards with the hypervisor and the physical network. There are different adapter types available for NICs on a FortiGate VM, such as E1000, VMXNET3, SR-IOV, etc. If performance is the main concern and cost is not a factor, one option is to use native ESXi networking with VMXNET3 adapter type for NICs on a FortiGate VM that will run on an ESXi hypervisor. VMXNET3 is a paravirtualized network interface card that is optimized for performance in virtual machines and supports features such as multiqueue support, Receive Side Scaling (RSS), Large Receive Offload (LRO), IPv6 offloads, and MSI/MSI-X interrupt delivery. Native ESXi networking means that the FortiGate VM uses the standard virtual switch (vSwitch) or distributed virtual switch (dvSwitch) provided by the ESXi hypervisor to connect to the physical network. This option can provide high performance and compatibility for NICs on a FortiGate VM without requiring additional hardware or software components. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/vm-installation-for-vmware-esxi/19662/installing-fortigate-vm-on-vmware-esxi https://docs.fortinet.com/document/fortigate/7.0.0/vm-installation-for-vmware-esxi/19662/networking
NEW QUESTION # 30
An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates. A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:
Based on this configuration, which two statements are true? (Choose two.)
- A. OCSP checks will always go to the configured FortiAuthenticator
- B. If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.
- C. OCSP certificate responses are never cached by the FortiGate.
- D. The OCSP check of the certificate can be combined with a certificate revocation list.
Answer: A,B
Explanation:
A is correct because the OCSP server is configured as the FortiAuthenticator in the config vpn certificate ocsp-server section. D is correct because the config vpn ssl settings section has set ocsp-option to allow. This means that if the OCSP server is unreachable, authentication will succeed if the certificate matches the CA. Reference: https://docs.fortinet.com/document/fortigate/7.0.1/administration-guide/490351/ssl-vpn-authentication https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/266506/ssl-vpn-with-certificate-authentication
NEW QUESTION # 31
Refer to the exhibit.
A customer has deployed a FortiGate 200F high-availability (HA) cluster that contains & TPM chip. The exhibit shows output from the FortiGate CLI session where the administrator enabled TPM.
Following these actions, the administrator immediately notices that both FortiGate high availability (HA) status and FortiManager status for the FortiGate are negatively impacted.
What are the two reasons for this behavior? (Choose two.)
- A. Configuration for TPM is not synchronized between FortiGate HA cluster members.
- B. The private-data-encryption key entered on the primary did not match the value that the TPM expected.
- C. TPM functionality is not yet compatible with FortiGate HA D The administrator needs to manually enter the hex private data encryption key in FortiManager
- D. The FortiGate has not finished the auto-update process to synchronize the new configuration to FortiManager yet.
Answer: A,B
Explanation:
The two reasons for the negative impact on the FortiGate HA status and FortiManager status after enabling TPM are:
The private-data-encryption key entered on the primary unit did not match the value that the TPM expected. This could happen if the TPM was previously enabled and then disabled, and the key was changed in between. The TPM will reject the new key and cause an error in the configuration synchronization.
Configuration for TPM is not synchronized between FortiGate HA cluster members. Each cluster member must have the same private-data-encryption key to form a valid HA cluster and synchronize their configurations. However, enabling TPM on one unit does not automatically enable it on the other units, and the key must be manually entered on each unit. To resolve these issues, the administrator should disable TPM on all units, clear the TPM data, and then enable TPM again with the same private-data-encryption key on each unit. References: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103437/inbound-ssl-inspection https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection-on-ssl-offloaded-traffic
NEW QUESTION # 32
Refer to the exhibits.
A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.) A)
B)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B,C
Explanation:
To enable application detection on plain-text traffic that has been decrypted by FortiADC, the administrator must perform two configuration tasks on CL-1:
Enable SSL offloading in the firewall policy and select the SSL-Offload protocol options profile.
Enable application control in the firewall policy and select the SSL-Offload-App-Detect application list. Reference: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection-on-ssl-offloaded-traffic
NEW QUESTION # 33
Refer to the exhibits.
A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer's requirements?
- A. 2x FortiSwitch 248E-FPOE
- B. 2x FortiSwitch 124E-FPOE
- C. 1x FortiSwitch 248EFPOE
- D. 2x FortiSwitch 224E-POE
Answer: A
Explanation:
The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer's requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer's requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. References: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf
NEW QUESTION # 34
Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)
- A. API
- B. Report
- C. FTP
- D. SCP
Answer: A,B
Explanation:
FortiSIEM supports two methods for importing user defined Lookup Table Data:
Report: You can import lookup table data from a report. This is the most common method for importing lookup table data.
API: You can also import lookup table data using the FortiSIEM API. This is a more advanced method that allows you to import lookup table data programmatically.
FTP, SCP, and other file transfer protocols are not supported for importing lookup table data into FortiSIEM.
NEW QUESTION # 35
What is the benefit of using FortiGate NAC LAN Segments?
- A. It provides support for IGMP snooping between hosts within the same VLAN
- B. It allows for assignment of dynamic address objects matching NAC policy.
- C. It provides physical isolation without changing the IP address of hosts.
- D. It provides support for multiple DHCP servers within the same VLAN.
Answer: B
Explanation:
FortiGate NAC LAN Segments are a feature that allows users to assign different VLANs to different LAN segments without changing the IP address of hosts or bouncing the switch port. This provides physical isolation while maintaining firewall sessions and avoiding DHCP issues. One benefit of using FortiGate NAC LAN Segments is that it allows for assignment of dynamic address objects matching NAC policy. This means that users can create firewall policies based on dynamic address objects that match the NAC policy criteria, such as device type, OS type, MAC address, etc. This simplifies firewall policy management and enhances security by applying different security profiles to different types of devices. References: https://docs.fortinet.com/document/fortigate/7.0.0/new-features/856212/nac-lan-segments-7-0-1
NEW QUESTION # 36
Refer to the exhibits.
An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work Based on the information given in the exhibits, what must be done to fix this?
- A. On FG-1 port1, the ftm access protocol must be enabled.
- B. On FG-1 CLI, the ftm-push server setting must point to 100.64.141.
- C. On FAC-1, the FortiToken public IP setting must point to 100.64.1 41
- D. FAC-1 must have an internet routable IP address for push notifications.
Answer: B
Explanation:
The FortiGate and Forti Authenticator configuration shown in the exhibits is using two-factor authentication with FortiToken push notifications for SSL VPN login. FortiToken push notifications are a feature that allows users to receive a notification on their mobile devices when they attempt to log in to a FortiGate or FortiAuthenticator service, and approve or deny the login request with a single tap. However, push notifications do not work in this scenario, even though users can manually type in their two-factor code and authenticate. One possible reason for this issue is that the FortiGate does not know how to reach the FortiAuthenticator server for push notifications. Therefore, to fix this issue, one option is to configure the ftm-push server setting on FG-1 CLI, which specifies the IP address or FQDN of the FortiAuthenticator server that handles push notifications. In this case, since FAC-1 has an IP address of 100.64.141, the ftm-push server setting on FG-1 CLI must point to 100.64.141 as well. Reference: https://docs.fortinet.com/document/fortiauthenticator/6.4.0/administration-guide/19662/fortitoken-mobile-push-notifications
NEW QUESTION # 37
You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)
- A. disable on ICL trunks
- B. enable on ICL trunks
- C. enable on the ISL and FortiLink trunks
- D. disable on the ISL and FortiLink trunks
Answer: A,C
Explanation:
To ensure that unnecessary multicast traffic is pruned from links that do not have a multicast listener, you must disable IGMP flood traffic on the ICL trunks and enable IGMP flood reports on the ISL and FortiLink trunks.
Disabling IGMP flood traffic will prevent the FortiSwitch units from flooding multicast traffic to all ports on the ICL trunks. This will help to reduce unnecessary multicast traffic on the network.
Enabling IGMP flood reports will allow the FortiSwitch units to learn which ports are interested in receiving multicast traffic. This will help the FortiSwitch units to prune multicast traffic from links that do not have a multicast listener.
NEW QUESTION # 38
Refer to the exhibits.
The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?
- A. Change advpn2 to IKEv1
- B. Use local-id
- C. Use network-overlay id
- D. Use peer-id
Answer: C
Explanation:
A is correct because using network-overlay id allows you to configure multiple ADVPN tunnels on a single interface with a single IP address on the DC FortiGate. This is explained in the FortiGate Administration Guide under ADVPN > Configuring ADVPN > Configuring ADVPN on the hub. Reference: https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn/978794/configuring-advpn
NEW QUESTION # 39
You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)
- A. disable on ICL trunks
- B. enable on ICL trunks
- C. enable on the ISL and FortiLink trunks
- D. disable on the ISL and FortiLink trunks
Answer: A,D
Explanation:
A is correct because disabling igmps-flood-traffic and igmps-flood-report on ICL trunks prevents unnecessary multicast traffic from being flooded across the MCLAG cluster members. C is correct because disabling igmps-flood-traffic and igmps-flood-report on the ISL and FortiLink trunks prevents unnecessary multicast traffic from being flooded to other switches or FortiGates that do not have multicast listeners. Reference: https://docs.fortinet.com/document/fortiswitches/6.4.0/administration-guide/381057/multicast-forwarding https://docs.fortinet.com/document/fortiswitches/6.4.0/administration-guide/381057/multicast-forwarding/381058/configuring-multicast-forwarding
NEW QUESTION # 40
......
Fortinet NSE8_812 Test Engine PDF - All Free Dumps: https://www.freecram.com/Fortinet-certification/NSE8_812-exam-dumps.html
Get New NSE8_812 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1lSIx21iUZzTt--Waz9WLaychEf04kzJ9