Most UptoDate HP HPE2-K45 Exam Dumps PDF 2024
100% Free HPE Technical HPE2-K45 Dumps PDF Demo Cert Guide Cover
NEW QUESTION # 19
A customer plans to mix nodes with different drive configuration in the same cluster. What should you explain
to this customer?
- A. Mixing All-flash and hybrid nodes in the same cluster is supported.
- B. Mixing nodes with different drive configuration is available only for AMD-based nodes.
- C. Mixing different drive configurations within a cluster results in unbalanced 10 performance.
- D. Mixing nodes with different drive configuration requires an additional license.
Answer: B
NEW QUESTION # 20
A customer wants to migrate virtual machines from the existing infrastructure to HPE SimpiiVlty. How can
you complete this task?
- A. Connect VMFS datastores holding the virtual machine files to HPE SimpliVity nodes, and migrate the
virtual machines. - B. Map VMFS datastores holding the virtual machine files as an RDM to HPE SimpliVity nodes, and
migrate the virtual machines. - C. Add ESXi system to the HPE SimpliVity cluster, and migrate the virtual machines to HPE SimpliVity datastores.
- D. Share HPE SimpliVity datastores with standard ESXi hosts, and migrate the virtual machines.
Answer: C
NEW QUESTION # 21
Refer to exhibit:
You are using Restore Virtual Machine for a given virtual machine. Which result is achieved by thrs
operation?
- A. New snapshot added to existing virtual machine
- B. New virtual machine created out of this backup
- C. New linked-clone created
- D. Virtual machine boot partition mapped as IS image to another VM
Answer: C
NEW QUESTION # 22
Which HPE SimpliVity Data Visualization Platform layer is responsible for storage and tracking of all data and metadata?
- A. Persistent Storage layer
- B. Data Management layer
- C. Presentation layer
- D. object Storage layer
Answer: A
Explanation:
The Persistent Storage layer is the lowest layer of the HPE SimpliVity Data Visualization Platform. It is responsible for storing and tracking all data and metadata on the HPE SimpliVity nodes. It uses a distributed file system that spans across all nodes in a cluster, and provides high availability, scalability, and performance. The Persistent Storage layer also integrates with the HPE OmniStack Accelerator Card, which enables accelerated data efficiency, global unified management, and built-in data protection12. References: HPE SimpliVity Data Virtualization Platform technical white paper, SimpliVity Data Virtualization Platform Architecture - YouTube
NEW QUESTION # 23
A customer wants to deploy HPE SimpliVity for a VDI Implementation. They need to add two NVIDIA GPU accelerators per hypervisor, and they have limited space in the data center. Which HPE SimpliVity model meets the customer needs?
- A. HPE SimpliVity 380 Gen 10 LFF H
- B. HPE SimpliVity 325 Gen10
- C. HPE SimpliVity 380 Ge10G
- D. HPE SimpliVity 2600
Answer: C
Explanation:
HPE SimpliVity 380 Ge10G is a hyperconverged solution that combines compute, storage, and networking in a 2U form factor. It supports up to two NVIDIA GPU accelerators per node, which can enhance the performance and user experience of VDI applications. It also offers high availability, data efficiency, and built-in data protection and disaster recovery. It supports VMware vSphere and Microsoft Hyper-V hypervisors, and integrates with HPE InfoSight for AI-driven operations and insights. References: HPE SimpliVity 380 Gen10; Technical Positioning of HPE SimpliVity for VDI solutions
NEW QUESTION # 24
When should an svtcli account be used?
- A. when two or more VCs are not available
- B. when hypervisor-based user is unavailable
- C. for a daily management tasks performed using CLI
- D. to access HPE SimpliVity data using REST API
Answer: C
NEW QUESTION # 25
A customer plans to add HPE SimpliVity 380 Gen10 H SFF nodes to their remote site. The primary site is
running HPE SimpliVity 380 Gen10 hardware accelerated nodes. Which recommendation should be applied
for this design?
- A. Create a new cluster and split Doth types of nodes equally between both clusters,
- B. Add new nodes to the existing cluster
- C. Create a new cluster with SimpliVity 380 Gen10 H SFF nodes.
- D. Configure the HPE SimpliVity 380 Gen 10 H SFF with a hardware accelerator card.
Answer: D
NEW QUESTION # 26
A customer plans to deploy HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes.
What should you recommend tor this setup?
- A. Put SFF and LFF nodes in separate clusters.
- B. Replace the LFF nodes with all-flash nodes.
- C. Put each type of the nodes in a different federation.
- D. Put all of the nodes in the same cluster.
Answer: A
Explanation:
HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes are two types of HPE SimpliVity nodes that differ in their form factor, storage capacity, and performance. LFF stands for large form factor, which means that the node has 3.5-inch hard disk drives (HDDs) and can support up to 40 TB of raw storage capacity. SFF stands for small form factor, which means that the node has
2.5-inch solid state drives (SSDs) and can support up to 23.4 TB of raw storage capacity12.
HPE SimpliVity nodes can be grouped into clusters, which are logical units of compute and storage resources that share the same configuration and policies. HPE SimpliVity clusters can be further grouped into federations, which are collections of clusters that span across different physical locations and provide unified management and data protection34.
For this setup, the recommended design is to put SFF and LFF nodes in separate clusters, but within the same federation. According to the HPE SimpliVity Federation Design and Scaling Guide document, the following reasons support this recommendation:
Mixing SFF and LFF nodes in the same cluster can cause performance and capacity imbalance, as the SFF nodes have faster SSDs and lower storage capacity than the LFF nodes. This can affect the data distribution, deduplication, compression, and backup operations within the cluster .
Separating SFF and LFF nodes into different clusters can allow the customer to optimize the workload placement and performance based on the node characteristics. For example, the customer can use the SFF cluster for high-performance and low-capacity workloads, such as databases or virtual desktops, and use the LFF cluster for low-performance and high-capacity workloads, such as file servers or archives .
Keeping SFF and LFF nodes within the same federation can enable the customer to benefit from the centralized management and data protection features of HPE SimpliVity. The customer can use the same interface to monitor and control the nodes across the clusters, and use the same policies to backup and restore the data across the sites .
References:
1: HPE SimpliVity 380 Gen10 LFF H Node Data sheet 2: HPE SimpliVity 380 Gen10 SFF H Node Data sheet 3: HPE SimpliVity Data Virtualization Platform 4: HPE SimpliVity Federation Design and Scaling Guide : [HPE SimpliVity 380 Gen10 Node Data sheet - PSNow] : [HPE SimpliVity 380 Gen10 Node | HPE Store US] : [HPE SimpliVity Intelligent Workload Optimizer] : [HPE SimpliVity with HPE StoreOnce Reference Architecture] : [HPE SimpliVity Stretched Cluster Guide] : [HPE SimpliVity Remote RapidDR Software Installation and Startup Service]
NEW QUESTION # 27
A customer plans to deploy HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes.
What should you recommend tor this setup?
- A. Put SFF and LFF nodes in separate clusters.
- B. Replace the LFF nodes with all-flash nodes.
- C. Put each type of the nodes in a different federation.
- D. Put all of the nodes in the same cluster.
Answer: A
NEW QUESTION # 28
Hyper Protected refers to which HPE SimpliVity ability?
- A. Integrate with Veeam to provide an external backup solution.
- B. Backup or restore 1TB VM in less than 1 minute.
- C. Define a storage policy using RAID 6 or RAID 60 to protect the VM.
- D. Restore individual files from a VM backup.
Answer: B
NEW QUESTION # 29
Which HPE SimpliVity Data Visualization Platform layer is responsible for storage and tracking of all data
and metadata?
- A. Persistent Storage layer
- B. Data Management layer
- C. Presentation layer
- D. object Storage layer
Answer: A
NEW QUESTION # 30
In an HPE SimpliVity 10-node cluster, a simultaneous increase of 10 requests across several VM caused a
surge in 10 traffic in a single node. Which HPE SimpliVity feature can evenly distribute the 10s across the
cluster?
- A. Management Virtual Appliance
- B. Intelligent Workload optimizer
- C. Resource Balancer
- D. Arbiter
Answer: D
NEW QUESTION # 31
A user deleted a file from Linux based virtual machine.
Which HPE SimpliVity data protection feature can be leveraged to recover the flie?
- A. Reverting to the SimpliVity snapshot
- B. Restoring a virtual machine from the backup
- C. Using file level restore option
- D. Moving a virtual machine from DR site to the primary site
Answer: B
NEW QUESTION # 32
What are the requirements for stretched cluster implementation?
- A. Arbiter located in the primary site
- B. The same subnet for the storage network for both locations
- C. A direct-connected network configuration
- D. Round trip latency below 50ms
Answer: B
NEW QUESTION # 33
What is the difference between crash consistent and application consistent cloning methods?
- A. Both methods are the same; the only difference is speed of cloning.
- B. Application-consistent clones allow the pending 10 operations to finish before committing them to the database.
- C. Application consistent method is available only for Linux operating systems.
- D. Crash consistent method should be used only for the virtual machines with Fault Tolerance enabled.
Answer: B
Explanation:
The difference between crash consistent and application consistent cloning methods is that the application consistent method ensures that the cloned virtual machine is in a consistent state with respect to the application and database, while the crash consistent method does not guarantee that1. The application consistent method uses the VMware snapshot or the Microsoft Volume Shadow Copy Service (VSS) to quiesce the application and flush the pending I/O operations to the disk before creating the clone, which prevents data corruption or loss2. The crash consistent method does not quiesce the application or flush the pending I/O operations, and creates the clone as if the virtual machine had crashed, which may result in data inconsistency or recovery issues3. The application consistent method is recommended for virtual machines that run database applications, such as SQL Server or Oracle, while the crash consistent method is suitable for virtual machines that run non-database applications, such as web servers or file servers4. The application consistent method is not available only for Linux operating systems (option D), as it also supports Windows Server operating systems that have VMware Tools or VSS installed5. The crash consistent method should not be used only for the virtual machines with Fault Tolerance enabled (option C), as it can be used for any virtual machine that does not require application consistency. Both methods are not the same,and the speed of cloning is not the only difference (option B), as they have different implications for the data integrity and availability of the cloned virtual machine. References:
1: Using HPE SimpliVity Official Certification Study Guide (HPE2-K45), HPE Press, 2019, p. 28.
2: Clone a virtual machine - techhub.hpe.com, HPE, 2021, 3.
3: HPE SimpliVity OmniStack Interoperability Guide 4.2.0, HPE, 2021, p. 8.
4: Using HPE SimpliVity Official Certification Study Guide (HPE2-K45), HPE Press, 2019, p. 29.
5: HPE SimpliVity OmniStack Interoperability Guide 4.2.0, HPE, 2021, p. 9.
[6]: Using HPE SimpliVity Official Certification Study Guide (HPE2-K45), HPE Press, 2019, p. 28.
[7]: Clone a virtual machine - techhub.hpe.com, HPE, 2021, 3.
NEW QUESTION # 34
Click the option that will allow you to integrate HPE SimpliVity with HPE Storence.
Answer:
Explanation:
Explanation:
Register External Store ...1
This option allows you to register an HPE StoreOnce Catalyst Store as an external backup target for HPE SimpliVity. This enables you to store VM backups on an HPEStoreOnce system, which is a disk-based backup solution that offers deduplication, compression, encryption, remote replication, and direct application-managed integration2.
To use this option, you need to have an HPE StoreOnce appliance connected to your HPE SimpliVity cluster, and configure a Catalyst Store on it. Then, you can select the All HPE SimpliVity Actions menu, and click Register External Store. You will be prompted to enter the following information:
The name of the external store
The IP address or hostname of the HPE StoreOnce appliance
The name of the Catalyst Store
The credentials of the Catalyst Store
After you enter the required information, click OK to register the external store1.
NEW QUESTION # 35
Click the option that will allow you to integrate HPE SimpliVity with HPE Storence.
Answer:
Explanation:
NEW QUESTION # 36
What are the requirements for stretched cluster implementation?
- A. Arbiter located in the primary site
- B. The same subnet for the storage network for both locations
- C. A direct-connected network configuration
- D. Round trip latency below 50ms
Answer: B
Explanation:
According to the HPE SimpliVity Stretched Cluster Technical Overview1, one of the configuration requirements for implementing a stretched cluster is that the storage network in each physical location must use the same subnet. This ensures that the HPE OmniStack System can communicate with each other across the sites and maintain data synchronization and availability. The other options are not correct because:
The arbiter must be located in a third site that is independent from the two stretched cluster sites1.
The round trip latency must be below 5ms, not 50ms, to avoid performance degradation and data inconsistency1.
A direct-connected network configuration is not required, as long as the network supports jumbo frames and VLAN tagging1. References: 1: HPE SimpliVity Stretched Cluster Technical Overview (51462)
NEW QUESTION # 37
......
HP HPE2-K45 exam is designed to test the knowledge and skills of IT professionals who specialize in using HPE SimpliVity technology. HPE SimpliVity is a hyperconverged infrastructure solution that combines storage, computing, and networking in a single platform. This technology can help IT teams simplify their infrastructure, reduce costs, and improve performance. The HPE2-K45 exam covers topics such as HPE SimpliVity architecture, deployment, management, and troubleshooting.
HP HPE2-K45 certification exam is designed for IT professionals who want to validate their skills and knowledge in using HPE SimpliVity technologies. HPE2-K45 exam is ideal for individuals who are responsible for designing, implementing, and managing HPE SimpliVity solutions in an enterprise environment. The HPE SimpliVity technology is a hyperconverged infrastructure solution that combines storage, computing, and networking resources in a single platform.
Updated HP HPE2-K45 Dumps – PDF & Online Engine: https://www.freecram.com/HP-certification/HPE2-K45-exam-dumps.html
PDF Exam Material 2024 Realistic HPE2-K45 Dumps Questions: https://drive.google.com/open?id=1C3yBlrRk1wa3cdfbetS_ryIfNb_ERfsh