[Oct 31, 2023] Powerful NSE5_FMG-7.0 PDF Dumps for NSE5_FMG-7.0 Questions
Authentic NSE5_FMG-7.0 Dumps - Free PDF Questions to Pass
Fortinet NSE5_FMG-7.0 is an exam that certifies the knowledge and expertise of individuals in Fortinet's FortiManager 7.0 product. FortiManager 7.0 is a centralized management solution for Fortinet's security fabric, allowing administrators to manage and monitor multiple devices from a single console. NSE5_FMG-7.0 exam is designed to test the knowledge and skills of individuals in configuring and managing FortiManager 7.0.
NEW QUESTION # 29
Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?
- A. Routing
- B. Security profiles
- C. SNMP
- D. NSX-T Service Template
Answer: A
NEW QUESTION # 30
What will happen if FortiAnalyzer features are enabled on FortiManager?
- A. FortiManager can be used only as a logging device.
- B. FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices.
- C. FortiManager will install the logging configuration to the managed devices
- D. FortiManager will keep all the logs and reports on the FortiManager.
Answer: C
NEW QUESTION # 31
Refer to the exhibit.
Which statement about the object named ALL is true?
- A. FortiManager installed the object ALL with the updated value.
- B. FortiManager updated the object ALL using the FortiManager value in its database.
- C. FortiManager updated the object ALL using the FortiGate value in its database.
- D. FortiManager created the object ALL as a unique entity in its database, which can be only used by this
managed FortiGate.
Answer: C
NEW QUESTION # 32
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- B. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- C. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
- D. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
Answer: B
Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.
NEW QUESTION # 33
View the following exhibit.
An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package. When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. 10.0.1.0/24
- B. Local-FortiGate will automatically choose an IP Network based on its network interface settings.
- C. It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values
- D. 192.168.0.1/24
Answer: A
NEW QUESTION # 34
Which two items are included in the FortiManager backup? (Choose two.)
- A. Global database
- B. Logs
- C. All devices
- D. FortiGuard database
Answer: A,C
NEW QUESTION # 35
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed gateways are devices managed by FortiManager in the same ADOM
- B. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec
VPN - C. Managed devices in other ADOMs must be treated as external gateways
- D. External gateways are third-party VPN gateway devices only
Answer: A,C
NEW QUESTION # 36
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?
- A. Any unused objects from a previous ADOM are moved to the new ADOM automatically
- B. Policy packages will be imported into the new ADOM automaticallyD
- C. Any pending device settings will be installed automatically
- D. The shared policy package will not be moved to the new ADOM
Answer: D
NEW QUESTION # 37
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?
- A. When creating a new policy package, the administrator can select the option to assign the global policy
package to the new policy package - B. When a new policy package is created, the administrator must assign the global policy package from the global ADOM.
- C. When a new policy package is created, the administrator needs to reapply the global policy package to
ADOM1. - D. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.
Answer: D
NEW QUESTION # 38
What is the purpose of the Policy Check feature on FortiManager?
- A. To find and delete disabled firewall policies in the policy package
- B. To find and provide recommendation for optimizing policies in a policy package
- C. To find and merge duplicate policies in the policy package
- D. To find and provide recommendation to combine multiple separate policy packages into one common policy package
Answer: B
NEW QUESTION # 39
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?
- A. It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.
- B. It installs the latest configuration on the specified FortiGate and update the revision history database.
- C. It installs the provisioning template configuration on the specified FortiGate.
- D. It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.
Answer: A
NEW QUESTION # 40
Which of the following statements are true regarding VPN Manager? (Choose three.)
- A. Common IPsec settings need to be configured only once in a VPN Community for all managed gateways.
- B. VPN Manager automatically adds newly-registered devices to a VPN community.
- C. VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec.
- D. VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time.
- E. VPN Manager must be enabled on a per ADOM basis.
Answer: A,D,E
NEW QUESTION # 41
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?
- A. ADOM1
- B. ADOM2 object database
- C. ADOM2
- D. File system
Answer: C
NEW QUESTION # 42
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to run real-time debugs on the managed devices
- B. Allows FortiManager to automatically configure a default route
- C. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
- D. Allows FortiManager to download IPS packages
Answer: C
Explanation:
FortiManager 6.2 Study guide page 350
NEW QUESTION # 43
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. 10.200.1.0/24
- B. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
- C. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
- D. 192.168.0.1/24
Answer: A
Explanation:
FortiManager_6.4_Study_Guide-Online - page 209
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of 192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/2.
NEW QUESTION # 44
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)
- A. It supports the FortiManager script feature
- B. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
- C. It allows making configuration changes for managed devices on FortiManager panes
- D. You cannot assign the same ADOM to multiple administrators
Answer: A,C
Explanation:
"FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol."
NEW QUESTION # 45
What does the diagnose dvm check-integrity command do? (Choose two.)
- A. Verifies and corrects duplicate VDOM entries
- B. Verifies and corrects unregistered, registered, and deleted device states
- C. Verifies and corrects database schemas in all object tables
- D. Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM syntax
Answer: A,B
Explanation:
6.2 Study Guide page 305 verify and correct parts of the device manager databases, including: - inconsistent device-to-group and group-to-ADOM memberships - unregistered, registered, and deleted device states - device lock statuses - duplicate VDOM entries
NEW QUESTION # 46
Which two statements regarding device management on FortiManager are true? (Choose two.)
- A. FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.
- B. FortiGate devices in HA cluster devices are counted as a single device.
- C. FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.
- D. The maximum number of managed devices for each ADOM is 500.
Answer: A,B
NEW QUESTION # 47
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec VPN
- B. Managed gateways are devices managed by FortiManager in the same ADOM
- C. Managed devices in other ADOMs must be treated as external gateways
- D. External gateways are third-party VPN gateway devices only
Answer: B,C
NEW QUESTION # 48
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)
- A. You must install these changes using the Install Wizard to a managed device
- B. The script history will show successful installation of the script on the remote FortiGate
- C. The Device Settings Status will be tagged as Modified
- D. The successful execution of a script on the Device Database will create a new revision history
Answer: A,C
NEW QUESTION # 49
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric.
Given the administrator's actions, which statement correctly describes the expected result?
- A. The authorized FortiGate will appear in the root ADOM.
- B. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors.
- C. The authorized FortiGate will be automatically added to the Training ADOM.
- D. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only.
Answer: A
NEW QUESTION # 50
Refer to the exhibit.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?
- A. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.
- B. FortiManager ignored the firewall service category General but created a new service category in its database.
- C. FortiManager ignored the firewall service category general and deleted the duplicate value In Its database
- D. FortiManager ignored the firewall service category General and did not update Its database with the value
Answer: A
NEW QUESTION # 51
What will happen if FortiAnalyzer features are enabled on FortiManager?
- A. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager
- B. FortiManager will reboot
- C. FortiManager can be used only as a logging device.
- D. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices
Answer: B
NEW QUESTION # 52
Refer to the exhibit.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. It disables concurrent read-write access to an ADOM.
- B. It allows the same administrator to lock more than one ADOM at the same time.
- C. It allows two or more administrators to make configuration changes at the same time, in the same ADOM.
- D. It is used to validate administrator login attempts through external servers.
Answer: A,B
NEW QUESTION # 53
......
Fortinet NSE5_FMG-7.0 certification exam is a hands-on exam that requires candidates to demonstrate their ability to perform real-world tasks in a simulated environment. NSE5_FMG-7.0 exam consists of 35 multiple-choice questions that must be completed within 60 minutes. Candidates must score at least 70% to pass the exam and earn the Fortinet NSE 5 - FortiManager 7.0 certification.
Guaranteed Accomplishment with Newest Oct-2023 FREE: https://www.freecram.com/Fortinet-certification/NSE5_FMG-7.0-exam-dumps.html
Use Valid New Free NSE5_FMG-7.0 Exam Dumps & Answers: https://drive.google.com/open?id=18ciTTHj3GA4M_jRKdMUZtBHC_GM7uHeq