Updated Mar-2025 Test Engine to Practice CTS-I Dumps & Practice Exam [Q103-Q127]

Share

Updated Mar-2025 Test Engine to Practice CTS-I Dumps & Practice Exam

Dumps Collection CTS-I Test Engine Dumps Training With 205 Questions


AVIXA CTS-I - Installation Exam Syllabus Topics:

TopicWeight
Duty A: Conducting Pre-Installation Activities20%
Task 1: Review Audiovisual Project Documentation4%
Task 2: Conduct Technical Site Survey4%
Task 3: Prepare for Audiovisual Installation4%
Task 4: Evaluate Overall Facility Readiness4%
Task 5: Conduct On-Site Preparations for Installation4%
Duty B: Conducting Site Rough-In/First-Fix10%
Task 1: Deinstallation of Existing Equipment and cabling2%
Task 2: Mount Substructure4%
Task 3: Pull Cable4%
Duty C: Installing Audiovisual Systems38%
Task 1: Assemble AV Rack4%
Task 2: Wire the AV Equipment Rack5%
Task 3: Distribute AV Equipment4%
Task 4: Mount AV Equipment4%
Task 5: Terminate Cables5%
Task 6: Configure Network Properties of Equipment4%
Task 7: Load Configuration and Control Programs4%
Task 8: Test the AV System4%
Task 9: Calibrate the AV System4%
Duty D: Perform Systems Close Out11%
Task 1: Demonstrate to Client or Client's Representative that System Performs to Specifications4%
Task 2:Provide Training on System Operation4%
Task 3:Obtain Project Completion Sign Off from Client or Client's Representative3%
Duty E: Conducting Ongoing Project Responsibilities21%
Task 1: Complete Progress Reports3%
Task 2: Coordinate with Other Contractors4%
Task 3: Address Needed Field Modifications4%

 

NEW QUESTION # 103
A customer has recently added a second wireless microphone to an existing system. The customer now complains that the sound quality from both microphones has degraded. Of the following, which is the MOST LIKELY cause for the problem?
Response:

  • A. The new wireless microphone is from a different manufacturer
  • B. The new wireless microphone shares a similar frequency as the old wireless microphone.
  • C. The existing wireless microphone is too old to be used with the new wireless microphone.
  • D. The old wireless microphone battery is dying.

Answer: B


NEW QUESTION # 104
After adjusting system equalization using the best tools available, you should ____.
Select all that apply.
Response:

  • A. check the system by listening to familiar audio content
  • B. check the system for distortion by listening at the highest expected volume
  • C. change equalization off-axis to fix coverage problems
  • D. balance amp and EQ levels by ear for best tonality

Answer: A,B,D


NEW QUESTION # 105
How can you access regional codes for safety procedures?
Response:

  • A. Check with local residents
  • B. Check websites of standards organizations
  • C. Check with the client
  • D. Check websites of manufacturers

Answer: B


NEW QUESTION # 106
What does 1000Base-T refer to?
Response:

  • A. Ethernet speed of 100 Mbps
  • B. IP speed of 100 Mbps
  • C. Ethernet speed of 1 Gbps
  • D. IP speed of 1 Gbps

Answer: C


NEW QUESTION # 107
Which mounting hardware will provide the MOST support when mounting a camera bracket to sheetrock/plasterboard not located near a wall stud?
Response:

  • A. Snap toggles / hollow wall anchors
  • B. Self tapping screws
  • C. Masonry bolts
  • D. Plastic wall anchors / wall plugs

Answer: A


NEW QUESTION # 108
What should you do with equipment manuals and software documentation?
Select all that apply.
Response:

  • A. Arrange them in alphabetical order
  • B. Leave a copy in the storage closet
  • C. Arrange them by function
  • D. Leave a copy with the AV rack

Answer: A,C,D


NEW QUESTION # 109
Which device is used to verify signal integrity throughout a video system?
Response:

  • A. An oscilloscope
  • B. A volt meter to check resistance
  • C. An impedance meter
  • D. A Video Optimization meter (VOM)

Answer: C


NEW QUESTION # 110
An architectural drawing was created using the U.S. customary scale of 1/8 inch = 1 foot. You measure a distance of 4.25 inches on the drawing. Which of the following is the actual distance in feet?
Response:

  • A. 28 feet
  • B. 16 feet
  • C. 34 feet
  • D. 68 feet

Answer: C


NEW QUESTION # 111
The connector pictured below is known as:

Response:

  • A. Captive screw compression termination
  • B. Insulation displacement
  • C. Ancillary dimpled solder connection
  • D. Direct connection termination

Answer: A


NEW QUESTION # 112
Which are best-practice methods for dressing a rack?
Select all that apply.
Response:

  • A. Keep power cords separate from signal cables.
  • B. Bundle cables by signal type.
  • C. Secure heavy cable bundles to lacing bars.
  • D. Use removable cable ties to secure a cable bundle.

Answer: A,B,C,D


NEW QUESTION # 113
A scope statement should include:
Response:

  • A. All the tasks that have to be performed
  • B. Both in-scope and out-of-scope items
  • C. Only the items within the project scope
  • D. Only the items within the deliverable scope

Answer: B


NEW QUESTION # 114
What is a best practice when installing cables where there is no conduit for ceiling-mounted projectors?
Response:

  • A. Stacking the cables along one side of the ceiling grid
  • B. Securing the cables with bridle rings mounted to bar joists
  • C. Resting the cables gently on the ceiling tile
  • D. Interlacing the cables

Answer: B


NEW QUESTION # 115
What assumptions should you make about an audio system when there is no audio output?
(Choose all that apply.)
Response:

  • A. Make no assumptions at all and select a troubleshooting strategy
  • B. The user is a complete idiot and did not switch the microphone on.
  • C. The mixing desk channel for the microphone is switched to line input mode.
  • D. The gain on the main audio amplifier may be wound down to zero

Answer: A


NEW QUESTION # 116
What is the point at which power enters the building?
Response:

  • A. The electrical entrance
  • B. The feeder
  • C. The main line
  • D. The service entrance

Answer: D


NEW QUESTION # 117
A projector weighing 429 pounds (195 kilograms) should be mounted only to what type of surface?
Response:

  • A. Drywall in conference room
  • B. Building structural support or blocking
  • C. Front wall in a classroom
  • D. Ceiling tile of an auditorium

Answer: B


NEW QUESTION # 118
A key objective for mounting AV equipment in a rack is to ___.
Response:

  • A. roll the gear in and out easily
  • B. protect the integrity of the system
  • C. hide it discretely in a closet
  • D. ensure only technical personnel can access it

Answer: B


NEW QUESTION # 119
Which of the following is mic-level voltage?
Response:

  • A. 0.316 volts (-10 dBV)
  • B. Up to about 100 volts
  • C. to 0.0003 volts (-60 to -50 dBu)
  • D. 1.23 volts (+4 dBu)

Answer: C


NEW QUESTION # 120
What type of drawing view shows the layout of items on the ceiling?
Response:

  • A. Reflected ceiling plan
  • B. Reflected floor plan
  • C. Detail ceiling drawing
  • D. Elevation drawing

Answer: A


NEW QUESTION # 121
When pulling a group of cables through conduit, it is advisable to:
Response:

  • A. Use the AV pulley system
  • B. Make a bulkhead
  • C. Tape them together
  • D. Utilize a sling

Answer: C


NEW QUESTION # 122
Before audiovisual equipment can be brought to a site what MUST occur?
Response:

  • A. All cable must be installed
  • B. General contractor must obtain a CO
  • C. The rack must be wired
  • D. The site must be clean and dust free

Answer: D


NEW QUESTION # 123
Which component would you use to distribute video from multiple sources to many displays or in different zones?
Response:

  • A. Matrix switcher
  • B. Distribution amplifier
  • C. Scan converter
  • D. Scaler

Answer: A


NEW QUESTION # 124
Which organization's general safety codes and regulations must you follow when visiting a job site?
Response:

  • A. The client's insurance company
  • B. The AHJ
  • C. The client
  • D. Your company

Answer: B


NEW QUESTION # 125
According to industry best practices, what is wrong with the picture above?

Response:

  • A. Poorly trimmed cable ties
  • B. The cable loop is too small
  • C. The cables are unsupported
  • D. Cable ties are too tight

Answer: C


NEW QUESTION # 126
A technician is servicing a projector with a problematic RGBHV input. The image has a pink hue. What is the cause for the pink hue?
Response:

  • A. Loss of vertical sync
  • B. Loss of green signal
  • C. Lamp is reaching end of life
  • D. Loss of horizontal sync

Answer: B


NEW QUESTION # 127
......


AVIXA CTS-I Exam Certification Details:

Non-Member Exam Price$575(USD)
Number of Questions110
Exam CodeCTS-I
Schedule ExamPearson VUE
Passing Score350 / 500
Books / TrainingCandidate Handbook
Exam NameAVIXA Certified Technology Specialist - Installation (CTS-I)

 

AVIXA CTS-I Dumps Cover Real Exam Questions: https://www.freecram.com/AVIXA-certification/CTS-I-exam-dumps.html

Real CTS-I dumps - Real AVIXA dumps PDF: https://drive.google.com/open?id=1eEPQKY4zl9GCCjw7v6dxwaEaIKyAJKSW 

0
0
0
10