300-610 Training & Certification Get Latest CCNP Data Center Updated on Apr 30, 2025
Certification Training for 300-610 Exam Dumps Test Engine
NEW QUESTION # 26
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Enable clients to pull changes to configuration files.
- B. Push configuration updates immediately to servers.
- C. Provide support for writing new modules in Python.
- D. Enable clients to pull changes without installing an agent.
- E. Enable one-off infrastructure changes to be performed manually.
Answer: A,B
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf
NEW QUESTION # 27
A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.
Which configuration meets these requirements?
- A. service profile template with type set to Updating
- B. service profile with type set to Local
- C. service profile with type set to Global
- D. service profile template with type set to Initial
Answer: A
NEW QUESTION # 28
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array.
Which design steps must be used to meet these requirements?
- A. Connect the iSCSI storage appliance on the core switch using a dedicated port.
Apply the session mutual authentication (CHAP) method between the targets and initiators. - B. Connect the iSCSI storage appliance on the core switch in vPC mode.
Configure a token-based authentication between the storage array and the clients. - C. Deploy the iSCSI storage appliance on the core switch in a separate VRF.
Apply the session mutual authentication (CHAP) method between the targets and initiators. - D. Place the iSCSI storage appliance on the core switch to isolate it in a private VLAN.
Configure a token-based authentication between the storage array and the clients.
Answer: C
NEW QUESTION # 29
An ACI deployment must:
Which VRF configuration must be used?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 30
An engineer must design Layer 2 connectivity for a subnet between two data centers. The engineer must ensure seamless host mobility and optimal first-hop routing.
Which attribute must be synchronized across all data centers to achieve this goal?
- A. DCNM to manage both fabrics
- B. NX-OS version
- C. anycast gateway MAC
- D. multicast group
Answer: C
NEW QUESTION # 31
Refer to the exhibit. A company plans to implement high availability between the iSCSI host and the Fibre Channel target. Which solution must the company implement to recover from a failure of a host NIC, MDS IP storage port, or Fibre Channel target port?
- A. Configure FCoE between the host NICs and MDS ports
- B. Map the Fibre Channel target ports to one IP storage port
- C. Set up IP storage ports to export the two Fibre Channel target ports
- D. Implement HSRPofi thf MDS IP storage ports
Answer: B
NEW QUESTION # 32
Which statement accurately describes the configuration requirements for disjoint Layer 2 networks on Cisco UCS?
- A. The VLAN IDs must overlap in both Layer 2 domains.
- B. The Cisco UCS fabric Interconnect must be in switch mode.
- C. All of the uplinks most be in one port channel to keep all of the ports active.
- D. The Cisco UCS Fabric Interconnect must be in end-host motto.
Answer: D
NEW QUESTION # 33
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?
- A. Physical interface
- B. management interface
- C. interface VLAN
- D. lookup
Answer: B
NEW QUESTION # 34
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. no spanning-tree blocked ports
- B. uses all available uplink bandwidth
- C. maintains single control plane
- D. supports Layer 3 port channels
- E. disables spanning-tree
Answer: A,B
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/ vpc_best_practices_design_guide.pdf
NEW QUESTION # 35
A network architect wants to automate data center LAN configuration by use of Kubernetes, aligned with Cisco best practices for underlay and overlay provisioning The automation must be able to operate in high-availability mode with active/active operation between hosts in dual data centers. Which configuration approach must the architect choose?
- A. Cisco Nexus Dashboard Fabric Controller
- B. OpenFlow
- C. Cisco OpFlex
- D. APIC-EM CLI
Answer: A
NEW QUESTION # 36
Which authentication software natively runs within the CLI of Cisco NX-OS devices?
- A. Python
- B. Puppet
- C. Chef
- D. Ansible
Answer: D
NEW QUESTION # 37
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
- A. dedicated compute nodes
- B. HyperFlex Edge support
- C. fabric interconnects
- D. encryption offload cards
Answer: B
NEW QUESTION # 38
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed using tools that support XML or JSON encoding. Which two components should be included in the design? (Choose two.)
- A. NX-API
- B. SSH
- C. HTTPS
- D. HTTP
- E. Bash shell
Answer: B,C
NEW QUESTION # 39
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value must be configured for all FCIP VSAN traffic.
- C. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides
/ipsvc/nxos/ipsvc/cfcip.html
NEW QUESTION # 40
Drag and Drop Question
A customer is deploying a SAN based on Cisco MDS 9000 Series Switches. Each Inter-Switch Link must carry multiple VSANs at the same time. The access switch must share the same domain ID as the director switch to reduce the number of domain IDs needed in the fabric. Drag and drop the operational port types from the right onto the boxes on the left to create a topology that meets these requirements. Not all port types are used. Port types are used more than once.
Answer:
Explanation:
NEW QUESTION # 41
An enterprise is experiencing transmission errors and excessive deploys over their WAN when backing up user workstations. A systems architect decided to resolve the problems by centralizing data storage and processing to within the confines of the data center. Which technology is most suitable to mitigate the issues?
- A. RAS
- B. VDI
- C. QoS
- D. VDC
Answer: C
NEW QUESTION # 42
......
Step by Step Guide to Prepare for 300-610 Exam: https://www.freecram.com/Cisco-certification/300-610-exam-dumps.html
CCNP Data Center 300-610 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1lhPj5Z4SLFL0Xstfi3tKx6sYNVp5zIu8