[Apr-2026] Pass Cisco 300-610 Tests Engine pdf - All Free Dumps [Q10-Q29]

[Apr-2026] Pass Cisco 300-610 Tests Engine pdf - All Free Dumps

Designing Cisco Data Center Infrastructure Practice Tests 2026 | Pass 300-610 with confidence!

Cisco 300-610 exam covers various topics, such as data center infrastructure design concepts, Cisco ACI architecture and design, data center networking design, storage networking design, compute and virtualization design, data center security design, automation, and orchestration. 300-610 exam is designed to evaluate the candidate's ability to translate business requirements into technical solutions and design complex data center infrastructures that meet performance, availability, and scalability requirements.

Cisco 300-610 exam is a comprehensive assessment of the candidate's knowledge of data center infrastructure design. 300-610 exam covers a variety of topics, including data center infrastructure design, data center storage networking design, data center compute networking design, data center virtualization design, and data center automation design. 300-610 exam is designed to test the candidate's ability to design data center infrastructure that is scalable, efficient, and secure.

To prepare for the Cisco 300-610 exam, candidates should have a solid understanding of networking technologies and protocols, storage technologies, virtualization technologies, and automation tools. They should also have experience working with Cisco data center technologies, including Cisco Nexus switches, Cisco UCS servers, and Cisco ACI. Candidates can prepare for the exam by taking Cisco training courses, using study materials such as books and practice exams, and gaining hands-on experience designing data center solutions.

NEW QUESTION # 10
Refer to the exhibit. Due to power limitations at the customer data center, the engineering team must decommission one of the modular switches. In the new design, the customer must ensure that the OSPF process is fully protected on the remaining switch and minimize OSPF flapping in case of any module failure. Which solution fulfills the requirements for the new design?

A. LSA aging timer change
B. OSPF area separation
C. graceful restart
D. routing summarization

Answer: D

NEW QUESTION # 11
Refer to the exhibit A Cisco engineer is configuring Cisco Nexus 7000 Series Switches. To simplify initial configuration verification and vPC+/HSRP troubleshooting, the engineer configures the primary vPC+ peer device with the FHRP active router highest priority. The primary FHRP device responds to ARP requests, even though the secondary vPC+ device also forwards the data traffic. Which configuration enables the Layer
3 connectivity from each vPC* peer device?

A. Ensure that the enhanced Layer 2 license has been installed.
B. Configure a VLAN network interlace for the same VLAN from both devices.
C. Manually configure virtual MAC addresses tor any FHRP protocol.
D. Set a restore timer that delays the vPC+ restart.

Answer: A

NEW QUESTION # 12
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)

A. It is an open standard.
B. It propagates hosts reachability without support of traffic flooding.
C. Layer 3 failures do not propagate beyond the OTV edge device.
D. It extends the spanning tree between data centers.
E. It constrains HSRP hello messages to each data center.

Answer: C,D

Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/ DCI3_OTV_Intro/DCI_1.html

NEW QUESTION # 13
An engineer must connect a storage array directly to an existing Cisco UCS Fabric Interconnect. The customer requires a solution that provides IP-based storage that does not need to be connected through an external switch Also, the operations team wants to have the ability to have direct access to the files stored on the storage array from their Linux hosts. Which storage technology meets these requirements?

A. FCoE
B. SCSI
C. NFS
D. SAN

Answer: C

NEW QUESTION # 14
Which two paths are provided by deploying an OOB management network in a data center that uses Cisco Nexus switches? (Choose two.)

A. Layer 3 for vPC keepalive packets
B. Layer 2 for server traffic
C. Layer 3 for server traffic
D. Layer 2 for a vPC peer link
E. Layer 3 for monitoring purposes

Answer: A,E

NEW QUESTION # 15
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines.
The operational complexity continues to grow with additional policies and servers added to the environment.
An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?

A. NSO
B. Ansible
C. Saltstack
D. Puppet

Answer: B

NEW QUESTION # 16
An engineer is experiencing performance issues on a Cisco UCS blade server. The B-Series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic.
Which policy must be used to alleviate these issues?

A. vNIC placement
B. Ethernet adapter
C. LAN connectivity
D. dynamic vNIC connection

Answer: B

Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_C onfiguration_Guide_141_chapter19.html Ethernet adapter policy is the only policy that is having configuration that is related to CPU.

NEW QUESTION # 17
A small company hosts several critical applications on bare-metal servers connected via iSCSI protocol to shared JBOD storage. One of the critical applications is experiencing latency issues, which the engineering team suspects is due to incorrect prioritization for iSCSI traffic. An engineer must update the network QoS settings to prioritize iSCSI traffic with these requirements:
iSCSI traffic must be prioritized.
The solution must be able to differentiate between different types of iSCSI traffic.
The solution must be scalable because iSCSI traffic is expected to increase in the future.
The solution must not disrupt other traffic.
Which two configurations must the engineer apply to the devices on the network to meet the requirements? (Choose two.)

A. ip access-list extended ISCSI
permit tcp any any eq 3260
B. policy-map QoS_Policy
class class-default
priority percent 100
police rate 100 mbps burst 5000 packets conform-action transmit exceed-action drop
C. ip access-list extended iSCSI
permit tcp any any eq 865
D. class-map match-all ISCSI
match access-group name ISCSI
policy-map QoS_Policy
class ISCSI
priority percent 50

Answer: A,D

NEW QUESTION # 18
Which technology can you use to create separate routing tables for different tenants that are hosted on the same Cisco NX-OS platform?

A. VLANs
B. Cisco FabricPath
C. VRF
D. vPC

Answer: C

NEW QUESTION # 19
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

Answer:

Explanation:

NEW QUESTION # 20
Which components share a physical interface in a VDC deployment?

A. interface VLAN and a VDC
B. two VDCs for Ethernet traffic
C. storage VDC for FCoE traffic and a VDC for Ethernet traffic
D. two storage VDCs for FCoE traffic

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/vdc/config/cisco_nexu s7000_vdc_config_guide_8x/creating-vdc.html

NEW QUESTION # 21
A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.
Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

A. IOM is connected to the fabric interconnect that is acting as fabric A, and IOM B is connected to the fabric interconnect that is acting as fabric B.
B. The IOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.
C. One, two, four and eight links are supported to be used between each IOM and fabric interconnect.
D. Straight and cross-connect links should be used between the IOMs and fabric interconnects to offer higher availability.
E. Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

Answer: A,E

NEW QUESTION # 22
Which technology enables Layer 2 extension between remote data center sites?

A. GRE
B. OTV
C. FCIP
D. DMVPN

Answer: B

Explanation:
Section: Network Design
Explanation/Reference: https://netcraftsmen.com/spanning-layer-2-between-data-centers/

NEW QUESTION # 23
The network engineering team at a large corporation operates a critical data center with stringent business requirements for network reliability and high availability. EIGRP is used as an interior routing protocol. The team is planning to implement a robust new redundancy strategy that minimizes downtime and maximizes network uptime. According to the requirements, business services can tolerate 3 seconds for failover performance. The solution must be based on RFC
2281. Which action must the team take as part of the implementation?

A. Implement VRRP to provide Layer 3 gateway redundancy.
B. Implement HSRP to provide gateway redundancy and failover.
C. Implement GLBP to distribute traffic across multiple gateways to provide load sharing.
D. Implement EIGRP with equal-cost multipath routing to provide load balancing.

Answer: A

Explanation:
RFC 2281 defines VRRP as a standards-based protocol for router failover. Deploying VRRP gives a virtual default gateway address that fails over to a backup within the required 3 seconds, ensuring uninterrupted Layer 3 connectivity without vendor lock-in.

NEW QUESTION # 24
Drag the appropriate from the left onto the current UDLD modes of operation on the right.

Answer:

Explanation:

NEW QUESTION # 25
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?

A. Data group
B. Control group
C. ARP filter
D. FHRP filter

Answer: D

Explanation:
Reference:

NEW QUESTION # 26
A Cisco engineer is using a PowerShell script to create a service profile template on Cisco UCS Manager. After defining the server pools and other templates, the engineer must ensure that the hosts are visible to the northbound SAN network and storage initiators. Which configuration must be applied to enable this capability?

A. Get-UcsApplianceCloud | Get-UcsVlan -name ApplianceVlan | Add-UcsVlanMemberPort - SwitchId A -SlotId 1 -PortId 15
B. Get-UcsMacPool -Ucs default | Add-UcsMacMemberBlock 00:25:B5:00:A0:00 00:25:B5:00:A0:08
C. $wwpn_pool | Add-UcsWwnMemberBlock -From 20:00:00:24:B5:00:00:00 -To
20:00:00:24:B5:00:00:09
D. Get-UcsApplianceCloud | Get-UcsVlan -Name ApplianceVlan | Add-UcsVlanMemberPortChannel
-SwitchId A -PortId $ap_pc.PortId

Answer: C

NEW QUESTION # 27
Which vNIC/vHBA Placement policy should be selected in Cisco UCS Manager to ensure that only dynamic and static vNICs and vHBAs are explicitly assigned to the policy?